Unraveling the Role of the Stoichiometry of Atomic Layer Deposited Nickel Cobalt Oxides on the Oxygen Evolution Reaction

Nickel cobalt oxides (NCOs) are promising, non-precious oxygen evolution reaction (OER) electrocatalysts. However, the stoichiometry-dependent electrochemical behavior makes it crucial to understand the structure-OER relationship. In this work, NCO thin film model systems are prepared using atomic layer deposition. In-depth film characterization shows the phase transition from Ni-rich rock-salt films to Co-rich spinel films. Electrochemical analysis in 1 m KOH reveals a synergistic effect between Co and Ni with optimal performance for the 30 at.% Co film after 500 CV cycles. Electrochemical activation correlates with film composition, specifically increasing activation is observed for more Ni-rich films as its bulk transitions to the active (oxy)hydroxide phase. In parallel to this transition, the electrochemical surface area (ECSA) increases up to a factor 8. Using an original approach, the changes in ECSA are decoupled from intrinsic OER activity, leading to the conclusion that 70 at.% Co spinel phase NCO films are intrinsically the most active. The studies point to a chemical composition dependent OER mechanism: Co-rich spinel films show instantly high activities, while the more sustainable Ni-rich rock-salt films require extended activation to increase the ECSA and OER performance. The results highlight the added value of working with model systems to disclose structure-performance mechanisms.

Electronic Structure Modification of MnO2 Nanosheet Arrays with Enhanced Water Oxidation Activity and Stability by Nitrogen Plasma

The strategic design of catalysts for the oxygen evolution reaction (OER) is crucial in tackling the substantial energy demands associated with hydrogen production in electrolytic water splitting. Despite extensive research on birnessite (δ-MnO2) manganese oxides to enhance catalytic activity by modulating Mn3+ species, the ongoing challenge is to simultaneously stabilize Mn3+ while improving overall activity. Herein, oxygen (O) vacancies and nitrogen (N) doping have been simultaneously introduced into the MnO2 through a simple nitrogen plasma approach, resulting in efficient OER performance. The optimized N-MnO2v electrocatalyst exhibits outstanding OER activity in alkaline electrolyte, reducing the overpotential by nearly 160 mV compared to pure pristine MnO2 (from 476 to 312 mV) at 10 mA cm-2, and a small Tafel slope of 89 mV dec-1. Moreover, it demonstrates excellent durability over a 122 h stability test. The introduction of O vacancies and incorporation of N not only fine-tune the electronic structure of MnO2, increasing the Mn3+ content to enhance overall activity, but also play a crucial role in stabilizing Mn3+, thereby leading to exceptional stability over time. Subsequently, density functional theory calculations validate the optimized electronic structure of MnO2 achieved through the two engineering methods, effectively lowering the intermediate adsorption free energy barrier. Our synergistic approach, utilizing nitrogen plasma treatment, opens a pathway to concurrently enhance the activity and stability of OER electrocatalysts, applicable not only to Mn-based but also to other transition metal oxides.

Shape-Preserved CoFeNi-MOF/NF Exhibiting Superior Performance for Overall Water Splitting across Alkaline and Neutral Conditions

This study reported a multi-functional Co0.45Fe0.45Ni0.9-MOF/NF catalyst for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting, which was synthesized via a novel shape-preserving two-step hydrothermal method. The resulting bowknot flake structure on NF enhanced the exposure of active sites, fostering a superior electrocatalytic surface, and the synergistic effect between Co, Fe, and Ni enhanced the catalytic activity of the active site. In an alkaline environment, the catalyst exhibited impressive overpotentials of 244 mV and 287 mV at current densities of 50 mA cm-2 and 100 mA cm-2, respectively. Transitioning to a neutral environment, an overpotential of 505 mV at a current density of 10 mA cm-2 was achieved with the same catalyst, showing a superior property compared to similar catalysts. Furthermore, it was demonstrated that Co0.45Fe0.45Ni0.9-MOF/NF shows versatility as a bifunctional catalyst, excelling in both OER and HER, as well as overall water splitting. The innovative shape-preserving synthesis method presented in this study offers a facile method to develop an efficient electrocatalyst for OER under both alkaline and neutral conditions, which makes it a promising catalyst for hydrogen production by water splitting.

Activating Inert Crystal Face via Facet-Dependent Quench-Engineering for Electrocatalytic Water Oxidation

Developing a facile strategy to activate the inert crystal face of an electrocatalyst is critical to full-facet utilization, yet still challenging. Herein, the electrocatalytic activity of the inert crystal face is activated by quenching Co3O4 cubes and hexagonal plates with different crystal faces in Fe(NO3)3 solution, and the regulation mechanism of facet-dependent quench-engineering is further revealed. Compared to the Co3O4 cube with exposed {100} facet, the Co3O4 hexagonal plate with exposed {111} facet is more responsive to quenching, accompanied by a rougher surface, richer defect, and more Fe doping. Theoretical calculations indicate that the {111} facet has a more open structure with lower defect formation energy and Fe doping energy, ensuring its electronic and coordination structure is easier to optimize. Therefore, quench-engineering largely increases the catalytic activity of {111) facet for oxygen evolution reaction by 13.2% (the overpotential at 10 mA cm-2 decreases from 380 to 330 mV), while {100} facet only increases by 7.6% (from 393 to 363 mV). The quenched Co3O4 hexagonal plate exhibits excellent electrocatalytic activity and stability in both zinc-air battery and water-splitting. The work reveals the influence mechanism of crystal face on quench-engineering and inspires the activation of the inert crystal face.

Atomically dispersed silver atoms incorporated in spinel cobalt oxide (Co3O4) for boosting oxygen evolution reaction

Incorporating noble metal single atoms into lattice of spinel cobalt oxide (Co3O4) is an attractive way to fabricate oxygen evolution reaction (OER) electrocatalysts because of the high activity and economic benefit. The commonly used high valence noble metal dopants such as ruthenium, iridium and rhodium tend to supersede Co3+ at octahedral site of Co3O4 and result in great activity, the origins of admirable activity were also wildly investigated. However, bare explorations on doping noble metal single atom into tetrahedral site of Co3O4 to construct OER catalyst have been reported, corresponding catalytic activity and mechanism remain mystery. Here, a promising structure that tetrahedrally substituent Ag single atom embedded in Co3O4 nanoparticles on the surface of carbon nanotube (Ag-Co3O4/CNT) was presented, and its performance in OER was probed. The high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption spectroscopy (XAS) demonstrate the successful embeddedness of atomical Ag atom in Co3O4 lattice, the resultant electronic interaction is conducive to promote charge transfer for OER. Theoretical calculations further disclose that atomical Ag dopant prefers to replace tetrahedral Co2+ rather than octahedral Co3+. The substitution Ag acts as the active site through Ag-Co bridge and facilitates the desorption process, which improves the turnover frequency (TOF) and boosts the intrinsic activity of Ag-Co3O4/CNT. Benefiting from the essentials above, Ag-Co3O4/CNT displays remarkable activity (236 mV@10 mA cm-2) and robust stability for alkaline OER. This finding offers a potential direction for the design of noble metal single atom involved Co3O4 based OER electrocatalysts.

One-Dimensional La0.2Sr0.8Cu0.4Co0.6O3-δ Nanostructures for Efficient Oxygen Evolution Reaction

Producing oxygen and hydrogen via the electrolysis of water has the advantages of a simple operation, high efficiency, and environmental friendliness, making it the most promising hydrogen production method. In this study, La0.2Sr0.8Cu0.4Co0.6O3-δ (LSCC) nanofibers were prepared by electrospinning to utilize non-noble perovskite oxides instead of noble metal catalysts for the oxygen evolution reaction, and the performance and electrochemical properties of LSCC nanofibers synthesized at different firing temperatures were evaluated. In an alkaline environment (pH = 14, 6 M KOH), the nanofibers calcined at 650 °C showed an overpotential of 209 mV at a current density of 10 mA cm-2 as well as good long-term stability. Therefore, the prepared LSCC-650 NF catalyst shows excellent potential for electrocatalytic oxygen evolution.

Recent advances of bifunctional catalysts for zinc air batteries with stability considerations: from selecting materials to reconstruction

With the growing depletion of traditional fossil energy resources and ongoing enhanced awareness of environmental protection, research on electrochemical energy storage techniques like zinc-air batteries is receiving close attention. A significant amount of work on bifunctional catalysts is devoted to improving OER and ORR reaction performance to pave the way for the commercialization of new batteries. Although most traditional energy storage systems perform very well, their durability in practical applications is receiving less attention, with issues such as carbon corrosion, reconstruction during the OER process, and degradation, which can seriously impact long-term use. To be able to design bifunctional materials in a bottom-up approach, a summary of different kinds of carbon materials and transition metal-based materials will be of assistance in selecting a suitable and highly active catalyst from the extensive existing non-precious materials database. Also, the modulation of current carbon materials, aimed at increasing defects and vacancies in carbon and electron distribution in metal-N-C is introduced to attain improved ORR performance of porous materials with fast mass and air transfer. Finally, the reconstruction of catalysts is introduced. The review concludes with comprehensive recommendations for obtaining high-performance and highly-durable catalysts.

Facile Gram-Scale Synthesis of Co3O4 Nanocrystal from Spent Lithium Ion Batteries and Its Electrocatalytic Application toward Oxygen Evolution Reaction

In this study, we demonstrate a new approach to easily prepare spinel Co₃O₄ nanoparticles (s-Co₃O₄ NPs) in the gram-scale from the cathode of spent lithium ion batteries (SLIBs) by the alkali leaching of hexaamminecobalt(III) complex ions. As-obtained intermediate and final products were characterized with powder X-ray diffraction (PXRD), Ultraviolet-Visible (UV-Vis), Fourier transform infrared (FTIR), and Transmission electron microscopy (TEM). Additionally, the synthesized s-Co₃O₄ NPs showed better electrocatalytic properties toward the oxygen evolution reaction (OER) in comparison to previously reported Co₃O₄ NPs and nanowires, which could be due to the more exposed electrocatalytic active sites on the s-Co₃O₄ NPs. Moreover, the electrocatalytic activity of the s-Co₃O₄ NPs was comparable to the previously reported RuO₂ catalysts. By taking advantage of the proposed recycling route, we would expect that various valuable transition metal oxide NPs could be prepared from SLIBs.

Electrochemical degradation of methylene blue by Pb modified porous SnO2 anode

A significant number of pollutants in wastewater can be electrocatalytically oxidized by SnO₂-Sb, a relatively inactive electrode. However, the arduous process of environmental remediation due to poor electrochemical performance and short service life of the traditional Ti/SnO₂-Sb electrode. In this work the SnO₂ electrode with a micron-sized sphere structure was prepared by in-situ hydrothermal. The results of the study that the electrode (Pb-10%) synthesized from the precursor solution in which the Pb:Sn molar ratio is 10% exhibits excellent electrooxidation properties. Impressiveing, the Pb-10% electrode displayed the small charge transfer resistance (10.71 Ω) and the high oxygen evolution potential (2.26 V vs. SCE). Thus, the electrochemical degradation experiment demonstrates that 100 mg L^-1 MB was degraded by Pb-10% electrode under the condition of initial pH = 5, and the decolorization rate reached 94.6%. Moreover, the influence of different parameters such as Pb doping amount, initial pH value of solution, initial concentration of MB and inorganic ions on degradation efficiency were also explored, in turn the practical application of electrodes in the field of purifying water resources is optimized. It is worth noting that the service life of the optimized electrode (100 mA cm^-2, 0.5 M H₂SO₄, 90 h) is about 12 times longer than that of the bare electrode (Sn-Sb). Therefore, the high-performance Ti/SnO₂-Sb electrode prepared in this work possesses vast application prospects in the electrocatalytic oxidation.

Porous spinel-type transition metal oxide nanostructures as emergent electrocatalysts for oxygen reduction reactions

Porous spinel-type transition metal oxide (PS-TMO) nanocatalysts comprising two kinds of metal (denoted as A_xB_3-xO₄, where A, B = Co, Ni, Zn, Mn, Fe, V, Sm, Li, and Zn) have emerged as promising electrocatalysts for oxygen reduction reactions (ORRs) in energy conversion and storage systems (ECSS). This is due to the unique catalytic merits of PS-TMOs (such as p-type conductivity, optical transparency, semiconductivity, multiple valence states of their oxides, and rich active sites) and porous morphologies with great surface area, low density, abundant transportation paths for intermediate species, maximized atom utilization and quick charge mobility. In addition, PS-TMOs nanocatalysts are easily prepared in high yield from Earth-abundant and inexpensive metal precursors that meet sustainability requirements and practical applications. Owing to the continued developments in the rational synthesis of PS-TMOs nanocatalysts for ORRs, it is utterly imperative to provide timely updates and highlight new advances in this research area. This review emphasizes recent research advances in engineering the morphologies and compositions of PS-TMOs nanocatalysts in addition to their mechanisms, to decipher their structure-activity relationships. Also, the ORR mechanisms and fundamentals are discussed, along with the current barriers and future outlook for developing the next generation of PS-TMOs nanocatalysts for large-scale ECSS.