Recent progress in the development of MOF-based optical sensors for Fe3

Selective Adsorption of Dyes and Fe3+ Sensing via Tb3+ Incorporation in an Anionic Cadmium-Organic Framework

A three-dimensional (3D) anionic cadmium-organic framework, namely [(CH3)2NH2][Cd1.5(DMTDC)2] ⋅ 2DMA ⋅ 0.5H2O (Cd-MOF; DMA=N,N-dimethylacetamide), was successfully synthesized under solvothermal conditions by using a linear thienothiophene-containing dicarboxylate ligand, 3,4-dimethylthieno [2,3-b]-thiophene-2,5-dicar-boxylic acid (H2DMTDC). Single-crystal X-ray diffraction analysis reveals that Cd-MOF exhibits a 3D anionic framework with pcu α-Po topology, featuring rectangle and rhombus-shaped channels along b- and c- axis direction. Cd-MOF demonstrates selective adsorption of cationic dyes over anionic and neutral dyes. Additionally, Tb3+-loaded Cd-MOF serves as a fast-response fluorescence sensor for the sensitive detection of Fe3+ ions with a low limit of detection (8.90×10-7 M) through fluorescence quenching.

Robust Optical Detection of Ga3+ by a Rhodamine- and Coumarin-Based Proficient Probe: Theoretical Investigations and Biological Applications

The present investigation highlights a rhodamine-B- and coumarin-based efficient probe that selectively detects Ga3+ over other metal ions. The active pocket of the ligand for trapping the metal ions and the binding stoichiometry of its Ga3+ complex were discovered by single-crystal X-ray diffraction (SC-XRD) analysis. This binding stoichiometry was further confirmed in the solution state by mass spectrometry and Job's plot. The detection limit was found to be at the nanomolar level. Pyrophosphate being a well-known quencher could easily quench the fluorescence intensity of the RC in the presence of Ga3+ and reversibly recognize Ga3+ in the solution. The spiro ring opening of the ligand after Ga3+ insertion is proposed to be the principal mechanism for the turn-on fluorescence response. This ring opening was confirmed by SC-XRD data and nuclear magnetic resonance (NMR) titration experiments. Both ground- and excited-state calculations of the ligand and complex have been carried out to obtain information about their energy levels and to obtain the theoretical electronic spectra. Furthermore, the live-cell imaging of the probe only and the probe after the addition of Ga3+ have been carried out in HaCaT cells and satisfactory responses were observed. Interestingly, with the help of this probe, Ga3+ can be tracked inside the intracellular organelle such as lysosomes along with other regions of the cell. The article highlights a rhodamine-coumarin-based probe for the detection of Ga3+ over other metal ions with a nanomolar level detection limit. Structural characterization of the ligand and its Ga3+ complex was investigated by SC-XRD. Density functional theory (DFT) and time-dependent DFT (TD-DFT) studies were carried out to explore the excited-state energies and electronic spectra. The application of the probe for the detection of Ga3+ in live cells has been explored, and positive responses were observed.

An optical and visual multi-mode sensing platform base on nitrogen, sulfur, boron co-doped carbon dots for rapid and simple determination of ferric ions in water

Abnormal iron ions levels may lead to some diseases and serious environmental pollution. Herein, optical and visual detection strategies of Fe3+ in water based on co-doped carbon dots (CDs) were established in the present study. Firstly, a one-pot synthetic strategy for the preparation of the N, S, B co-doped CDs with a home microwave oven was developed. Secondly, the optical properties, chemical structures, and morphology of CDs were further characterized by fluorescence spectroscopy, Uv-vis absorption spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscope. Finally, the results indicated that the fluorescence of the co-doped CDs was quenched by ferric ions via the static mechanism and the aggregation of CDs, accompanied by the increased red color. The multi-mode sensing strategies of Fe3+ with fluorescence photometer, UV-visible spectrophotometer, portable colorimeter and smartphone had the advantages of good selectivity, excellent stability and high sensitivity. Fluorophotometry based on co-doped CDs was a powerful probe platform for measuring lower concentrations of Fe3+ due to its higher sensitivity, better linear relationship, lower limit of detection (0.27 μM) and limit of quantitation (0.91 μM). In addition, the visual detection methods with a portable colorimeter and smartphone had been proven to be very suitable for rapid and simple sensing of higher concentrations of Fe3+. Moreover, the co-doped CDs utilized for Fe3+ probes in tap water and boiler water obtained satisfactory results. Consequently, the efficient, versatile optical and visual multi-mode sensing platform could be extended to apply such a visual analysis of ferric ions in the biological, chemical and other fields.

Easily synthesizable molecular probe for the nanomolar level detection of Cd2+ in near aqueous media: Theoretical investigations and live cell imaging

The present investigation highlights a quinoline-based small molecule probe (DEQ) for the detection of Cd2+ among other metal ions in near-aqueous media. The probe DEQ and its Cd2+ complex (DEQ-Cd) have been synthesized and characterized by all possible spectroscopic methods. The weakly emissive DEQ showed its strong emission in the presence of Cd2+, which is attributed to the photoinduced electron transfer (PET) along with the chelation-enhanced fluorescence (CHEF) mechanism. The 1:1 binding mode between ligand and Cd2+ is confirmed by single crystal XRD analysis, which is further supported by Job's plot and HRMS. The detection limit of the probe to recognize Cd2+ was found to be as low as 89 nM. Furthermore, DEQ can act as a reversible fluorescence probe with the off-on-off mechanism by the alternative addition of Cd2+ and EDTA. DFT and TD-DFT studies exposed the proposed mechanism after Cd2+ insertion and the obtained results for electronic spectra are in line with the experimental results. The response towards pH was quite interesting and allowed us to study its application in live cell imaging. With all the positive results, the proposed ligand DEQ can be used as a potential probe for the detection of Cd2+ in real-life applications.

Photo-Fenton degradation of tetracycline antibiotic over MIL-101(Cr)/FeOOH nanocomposite as stable and efficient visible light responsive photocatalyst

Designing an inexpensive, easily synthesized, stable and efficient photocatalyst is a major challenge in photocatalysis area, especially when photo-reaction is performed in aquatic medium to degrade organic pollutants. To this aim, nano-sized MIL-101(Cr) (MIL = Materials Institute Lavoisier), as chemically tolerant metal-organic framework (MOF), was simply prepared via HF-free hydrothermal synthesis procedure. In order to decorate amorphous FeOOH quantum dots (QDs) on the surface of this MOF, various amounts of FeOOH QDs (i.e., 5, 10, 15 and 20 wt%) were synthesized in the presence of MIL-101(Cr) to prepare MIL-101(Cr)/FeOOH(x%) nanocomposites. Decoration of such iron oxide quantum dots on the surface of MIL-101(Cr) and investigation of its activity in photo-Fenton degradation of tetracycline (TC) antibiotic is reported here for the first time. Among the synthesized nanocomposites, MIL-101(Cr)/FeOOH(15%) demonstrated superior photo-Fenton activity in degradation of TC (80%) at short reaction time under optimum reaction condition using the energy-efficient white LED lamps as visible light source. It was observed that the synergy between any component of this photo-Fenton system such as nanocomposite, hydrogen peroxide and visible light is the main reason for enhancement of TC removal over time. Also, neither MIL-101(Cr) nor FeOOH QDs exhibited poor degradation efficiency, which implies the positive role of the coupling of these materials. Furthermore, the stability and recoverability of MIL-101(Cr)/FeOOH(15%) nanocomposite was investigated in four photo-Fenton cycles, which no significant decrease in TC degradation performance was observed.

Highly Luminescent Lanthanide Metal-Organic Frameworks with Tunable Color for Nanomolar Detection of Iron(III), Ofloxacin and Gossypol and Anti-counterfeiting Applications

Solvothermal reaction of 5,5'-(pyridine-2,6-diylbis(oxy))diisophthalic acid (H4 L) with europium(III) or terbium(III) nitrates in acetonitrile-water (1 : 1) at 120 °C gave rise to isostructural 2D coordination polymers, [Ln(HL)(H2 O)3 ]∞ (NIIC-1-Eu and NIIC-1-Tb), the layers of which are composed by eight-coordinated lanthanide(III) ions interconnected by triply deprotonated ligands HL3- . The layers are packed in the crystal without any specific intermolecular interactions between them, allowing the facile preparation of stable water suspensions, in which NIIC-1-Tb exhibited top-performing sensing properties through luminescence quenching effect with exceptionally low detection limits towards Fe3+ (LOD 8.62 nM), ofloxacin (OFX) antibiotic (LOD 3.91 nM) and cotton phytotoxicant gossypol (LOD 2.27 nM). In addition to low detection limit and high selectivity, NIIC-1-Tb features fast sensing response (within 60-90 seconds), making it superior to other MOF-based sensors for metal cations and organic toxicants. The photoluminescence quantum yield of NIIC-1-Tb was 93 %, one of the highest among lanthanide MOFs. Mixed-metal coordination polymers NIIC-1-Eux Tb1-x demonstrated efficient photoluminescence, the color of which could be modulated by the excitation wavelength and time delay for emission monitoring (within 1 millisecond). Furthermore, an original 2D QR-coding scheme was designed for anti-counterfeiting labeling of goods based on unique and tunable emission spectra of NIIC-1-Ln coordination polymers.

A Ratiometric Fluorescent Probe Based on RhB Functionalized Tb-MOFs for the Continuous Visual Detection of Fe3+ and AA

In this study, a red-green dual-emitting fluorescent composite (RhB@MOFs) was constructed by introducing the red-emitting organic fluorescent dye rhodamine B (RhB) into metal-organic frameworks (Tb-MOFs). The sample can be used as a ratiometric fluorescent probe, which not only avoids errors caused by instrument and environmental instability but also has multiple applications in detection. The results indicated that the RhB@MOFs exhibited a turned-off response toward Fe3+ and a turned-on response for the continuous detection of ascorbic acid (AA). This ratiometric fluorescent probe possessed high sensitivity and excellent selectivity in the continuous determination of Fe3+ and AA. It is worth mentioning that remarkable fluorescence change could be clearly observed by the naked eye under a UV lamp, which is more convenient in applications. In addition, the mechanisms of Fe3+- and AA-induced fluorescence quench and recovery are discussed in detail. This ratiometric probe displayed outstanding recognition of heavy metal ions and biomolecules, providing potential applications for water quality monitoring and biomolecule determination.

AIEgen-sensitized lanthanide nanocrystals as luminescent probes for intracellular Fe3+ monitoring

The abnormal Fe³⁺ level is known to cause various diseases, such as heart failure, liver damage and neurodegeneration. In situ probing Fe³⁺ in living cells or organisms is highly desired for both biological research and medical diagnostics. Herein, hybrid nanocomposites NaEuF₄@TCPP were constructed by the assembly of an aggregation-induced emission luminogen (AIEgen) TCPP and NaEuF₄ nanocrystals (NCs). The anchored TCPP on the surface of NaEuF₄ NCs can reduce rotational relaxation of the excited state and efficiently transfer the energy to the Eu³⁺ ions with minimized nonradiative energy loss. Consequently, the prepared NaEuF₄@TCPP nanoparticles (NPs) exhibited an intense red emission with a 103-fold enhancement relative to that in NaEuF₄ NCs under 365 nm excitation. A selectively quenching response to Fe³⁺ ions for the NaEuF₄@TCPP NPs makes them luminescent probes for sensitive detection of Fe³⁺ ions with a low detection limit of 340 nM. Moreover, the luminescence of NaEuF₄@TCPP NPs could be recovered by the addition of iron chelators. Benefiting from their good biocompatibility and stability in living cells, together with the characteristic of the reversible luminescence response, the lipo-coated NaEuF₄@TCPP probes were successfully applied for real-time monitoring of Fe³⁺ ions in living HeLa cells. These results are expected to motivate the exploration of AIE-based lanthanide probes for sensing and biomedical applications.

A ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles for selective and sensitive detection of Fe3+ and Cu2+ ions

Detection of Fe(III) and Cu(II) in water is highly desirable because their abnormal levels can cause serious harm to human health and environmental safety. In this work, a ratiometric luminescence sensing platform based on lanthanide-based silica nanoparticles was constructed for the detection of Fe³⁺ and Cu²⁺ ions. The terbium-silica nanoparticles (named SiO₂@Tb) with dual-emission signals were successfully prepared by grafting Tb³⁺ ions onto trimellitic anhydride (TMA) functionalized silica nanospheres. It can serve as a ratiometric fluorescent probe for the detection of Fe³⁺ and Cu²⁺ ions in water with the green emission of Tb³⁺ ions as a response signal and the blue emission of silica nanospheres as the reference signal. Significantly, an easy-to-differentiate color change for visual detection was also realized. SiO₂@Tb shows high sensitivity even in very low concentration regions towards the sensing of Fe³⁺ and Cu²⁺ with low detection limits of 0.75 μM and 0.91 μM, respectively. Moreover, the mechanism for the luminescence quenching of SiO₂@Tb was systematically investigated, and was attributed to the synergetic effect of the absorption competition quenching (ACQ) mechanism and cation exchange. This study demonstrates that SiO₂@Tb can be employed as a promising fluorescent probe for the detection of Fe³⁺ and Cu²⁺ ions, and the combination of lanthanide ions with silica nanoparticles is an effective strategy to construct a ratiometric fluorescent sensing platform for the determination of analytes in environmental detection.

Four series of lanthanide coordination polymers based on the tetrabromobenzene-1,4-dicarboxylate ligand: structural diversity and multifunctional properties

Four series of lanthanide-based coordination polymers (LnCPs), namely [Ln(Br₄bdc)_1.5(MeOH)₃] (1Ln; Ln = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy), [Ln₂(Br₄bdc)₂(NO₃)₂(MeOH)₄] (2Ln; Ln = Ce, Pr, Nd, Sm), [Ln(Br₄bdc)(NO₃)(MeOH)] (3Ln; Ln = Gd, Tb, Dy), and [Ln₂(Br₄bdc)₃(H₂O)_2.3(MeOH)_2.7] (4Ln; Ln = Gd, Tb, Dy) have been synthesized by reacting hydrated lanthanide(III) salts with tetrabromobenzene-1,4-dicarboxylic acid (H₂Br₄bdc) in different solvents under solvothermal conditions. The structural diversity found in the system mainly resulted from the effects of anions, solvents, and the variation in the ionic radii of the lanthanide(III) ions. Compounds in series 1Ln feature a two-dimensional (2D) layered structure with sql topology based on {(Ln(COO)₂)₂(μ-COO)₂} secondary building units (SBUs). Compounds in series 2Ln and 3Ln comprise, respectively, infinite uniform and alternate chains of {Ln(COO)₂}_n SBUs that are assembled into a similar network topology to 1Ln. Meanwhile, compounds in series 4Ln feature 3D coordination networks of a pcu α-Po topological net consisting of binuclear {Ln₂(COO)₃} SBUs. The formation of polymeric networks in series 1Ln-4Ln is facilitated by the numerous coordination sites of the ligand Br₄bdc^2- and the fact that its bromine atoms can participate in the formation of various types of intermolecular interactions. The solid-state photoluminescence studies on Eu- (1Eu) and Tb- (1Tb, 3Tb, 4Tb) containing compounds indicate that the Br₄bdc^2- ligands can efficiently sensitize Eu³⁺ and Tb³⁺ emission. Notably, such compounds exhibit highly sensitive fluorescence sensing for acetone, water, and Fe³⁺ ions via the fluorescence quenching effect. As the representatives of the series, activated 1Eu, 2Pr, 3Tb, and 4Tb show the maximum CO₂ uptake capacities of 170.4, 273.7, 255.3, and 303.5 cm³ g^-1, respectively, at 50 bar and 298 K with good repeatability of the adsorption-desorption properties. Magnetic studies indicate that the Gd- and Dy-based compounds 1Gd, 1Dy, 3Gd, 3Dy, and 4Gd show simple paramagnetic behaviours, whereas compound 4Dy exhibits weak ferromagnetic interactions.

CuII Ion Doping Enhances the Water Stability of Luminescent Metal–Organic Framework, Realizing the Detection of Fe3+ and Antibiotics in Aqueous Solutions

Luminescent metal–organic frameworks (LMOFs) have been widely developed in the field of chemical sensing owing to their outstanding photoluminescence performance, high selectivity, anti-interference, high sensitivity, and fast response, and have become one of the research hotspots of emerging functional materials. However, in practical applications, many tests are carried out in the water environment, and fragile water stability greatly limits the application of MOFs in the field. Therefore, it is important to develop a method to enhance the water stability of MOFs. Herein, a new complex {[Zn(L)]·CH₃CN}_n (Zn-MOF, H₂L = 5-(benzimidazol-1-yl) isophthalic acid) with a superior photophysical property has been synthesized first. Its water stability was highly enhanced by the doping of Cu^II ions by the one-pot method. In addition, the detection performances of doping material Cu_0.1/Zn-MOF for sixteen metal ions and thirteen antibiotics were well studied. It was found that Cu_0.1/Zn-MOF displays high sensitivity, fast response, lower detection limit, and long-term stability for the detection of Fe³⁺, NFT, NFZ, FZD, and TC in the aqueous medium.

A Ni-MOF based luminescent sensor for selective and rapid sensing of Fe(ii) and Fe(iii) ions

In this work, a bis(N,N-trimellitoyl)-4,4′-oxydianiline linker was synthesized and characterized by spectroscopic techniques. The molecular structure and luminescence intensity of the Ni-MOF treated with different metal ions were investigated.

A Eu(iii) metal–organic framework based on anthracenyl and alkynyl conjugation as a fluorescence probe for the selective monitoring of Fe3+ and TNP

In this work, a luminescent metal–organic framework (Eu-MOF {[Eu₆L₆(μ₃-OH)₈(H₂O)₃]₈·H₂O}_n) was constructed by a solvothermal method with a linear organic ligand L (10-[(2-amino-4-carboxyl-phenyl)ethynyl]anthracene-9-carboxylic acid) based on anthracene and alkyne groups and using Eu³⁺ as the metal center. The MOF exhibits a stable UiO-66 crystal structure, and a six-core cluster twelve-linked secondary structural unit was successfully synthesized using 2-fluorobenzoic acid as a modulator, forming a classical fcu topology. Moreover, it exhibits good chemical stability. Interestingly, Eu-MOF exhibited high selectivity and sensitive fluorescence burst properties towards Fe³⁺ ions and 2,4,6-trinitrophenol (TNP) in DMF solution. For Fe³⁺, the K_SV value is 5.06 × 10⁵ M⁻¹ and the LOD value is 5.1 × 10⁻⁷ M. For TNP, the K_SV value is 1.92 × 10⁴ M⁻¹ and the LOD value is 1.93 × 10⁻⁶ M. In addition, Eu-MOF showed good anti-interference ability and fast response. This work provides an excellent fluorescent sensor for the detection of Fe³⁺ and 2,4,6-trinitrophenol (TNP) residues in contaminants.

In this work, Eu-MOF has been synthesized and has excellent luminescence recognition ability for Fe³⁺ and TNP with good selectivity and high sensitivity via luminescence quenching.

A dye encapsulated zinc-based metal-organic framework as a dual-emission sensor for highly sensitive detection of antibiotics

Self-assembly of two Zn-MOFs, [Zn₂L(DMF)₃]·H₂O·5DMF (1) and [Zn₂L(H₂O)₂]·4H₂O·3DMF (2), was achieved with an amide-functionalized tetracarboxylate ligand under similar conditions. Incorporated amide groups make the tetratopic linkers exhibit different configurations, tetrahedron and square, and subsequently combine tetrahedral [Zn₂(CO₂)₄] clusters or square paddle-well [Zn₂(CO₂)₄] clusters to afford a lon net for 1 and a nbo net for 2. Remarkably, 2 demonstrated high porosity and amide group decorated cages, and thereby proved to be a good capturing agent for a fluorescent dye molecule (DMASM). Consequently, a dual-emitting DMASM@2 sensor was successfully fabricated based on effective energy transfer from the host framework to DMASM with the variable luminescent color being visible to the naked eye. DMASM@2 could be used for the detection of metronidazole (MDZ) and dimetridazole (DTZ) with high sensitivity and remarkable recyclability.

The construction of a multifunctional luminescent Eu-MOF for the sensing of Fe3+, Cr2O72− and amines in aqueous solution

A 3D Eu(iii)-based metal–organic framework has been synthesized as a multiresponsive chemosensor for highly sensitive and selective detection of Fe3+, Cr2O72− and amines in water.