Fluoride sensing performance of fluorescent NH2-MIL-53(Al): 2D nanosheets vs. 3D bulk

A multifunctional sensor for detecting tetracycline, 4-nitrophenol, and pesticides

In recent years, due to the abuse of antibiotics, nitro explosives and pesticides, which have caused great harm to the environment and human health, social concerns have prompted researchers to develop more sensitive detection platforms for these pollutants. In this paper, a novel two-dimensional Zn (II) coordination polymer, [Zn(L)0.5(1,2-bimb)]·DMF (1), [H4L=[1,1':4',1''-terphenyl]-2, 2'',4, 4'' -tetracarboxylic acid, 1,2-bimb = 1,2-bis(imidazol-1-ylmethyl)benzene] was synthesized using a hydro-solvothermal method. Among commonly used organic solvents, 1 exhibits significant stability. Fast and efficient fluorescence response can be achieved for tetracycline (TET), 4-nitrophenol (4-NP), fluazinam (FLU), and abamectin benzoate (AMB) with low detection limits. A binary intelligent logic gate device with FLU and AMB as chemical input signals is successfully constructed, which provides a new idea for biochemical detection. In addition, a portable visual test paper has been prepared, which has high sensitivity, good selectivity, and simple operation. It can be used for rapid detection of pollutants in daily life and has broad application prospects. Finally, a detailed discussion was conducted on the fluorescence sensing mechanism of 1 for detecting TET, 4-NP, AMB and FLU.

Immobilization of europium and terbium ions with tunable ratios on a dispersible two-dimensional metal-organic framework for ratiometric photoluminescence detection of D2O

A two-dimensional zirconium-based metal-organic framework (2D Zr-MOF), ZrBTB (BTB = 1,3,5-tri(4-carboxyphenyl)benzene), is used as a platform to simultaneously immobilize terbium ions and europium ions with tunable ratios on its hexa-zirconium nodes by a post-synthetic modification. The crystallinity, morphology, porosity and photoluminescence (PL) properties of the obtained 2D Zr-MOFs with various europium-to-terbium ratios are investigated. With the energy transfer from the excited BTB linker to the installed terbium ions and the energy transfer from terbium ions to europium ions, a low loading of immobilized europium ions and a high loading of surrounding terbium ions in the 2D Zr-MOF result in the optimal PL emission intensities of europium; this phenomenon is not observable for the physical mixture of both terbium-installed ZrBTB and europium-installed ZrBTB. The role of installed terbium ions as efficient mediators for the energy transfer from the excited BTB linker to the installed europium ion is confirmed by quantifying PL quantum yields. As a demonstration, these materials with modulable PL characteristics are applied for the ratiometric detection of D2O in water, with the use of the stable emission from the BTB linker as the reference. With the strong emission of immobilized europium ions and the good dispersity in aqueous solutions, the optimal bimetal-installed ZrBTB, Eu-Tb-ZrBTB(1 : 10), can achieve the sensing performance outperforming those of the terbium-installed ZrBTB, europium-installed ZrBTB and the physical mixture of both.

In Situ Ni(II) Complexation Induced Deprotonation of Bis-Thiourea-Based Tweezers in DMSO-Water Medium: An Approach toward Recognition of Fluoride Ions in Water with Organic Probe Molecules

Recognition of fluoride in water through the fluoride-induced Brönsted acid-base deprotonation reaction of an organic probe molecule is still a challenging task owing to the lower basicity of fluoride ions and the instability of the conjugate base of the probe molecules in aqueous medium. Herein, we report a complementary strategy in which the conjugate base of the studied bis-thiourea molecule in dimethyl sulfoxide (DMSO) medium is simultaneously stabilized through chelation of the Ni(II) ion, which eventually facilitates the recognition of the fluoride ion in water samples. The recognition methodology is validated colorimetrically and electrochemically, and finally, the applicability of the approach is explored with water samples collected from fluoride-affected areas. The limit of detection value for the fluoride ion in water medium was found to be 0.2 and 0.3 ppm with UV-visible spectroscopy and differential pulse voltammetry measurements, respectively. The methodology is also demonstrated on a paper strip for the detection of the fluoride ion with the naked eye and a smartphone-based RGB sensor. The scheme has been shown to be effective in enhancing the aqueous fluoride recognition ability of the organic probe molecules with acidic hydrogen prone to deprotonation by the fluoride ion.

Multi-analyte fluorescence sensing based on a post-synthetically functionalized two-dimensional Zn-MOF nanosheets featuring excited-state proton transfer process

Covalent post-synthetic modification of metal-organic frameworks (MOFs) represents an underexplored but promising avenue for allowing the addition of specific fluorescent recognition elements to produce the novel MOF-based sensory materials with multiple-analyte detection capability. Here, an excited-state proton transfer (ESPT) active sensor 2D-Zn-NS-P was designed and constructed by covalent post-synthetic incorporation of the excited-state tautomeric 2-hydroxypyridine moiety into the ultrasonically exfoliated amino-tagged 2D Zn-MOF nanosheets (2D-Zn-NS). The water-mediated ESPT process facilitates the highly accessible active sites incorporated on the surface of 2D-Zn-NS-P to specifically respond to the presence of water in common organic solvents via fluorescence turn-on behavior, and accurate quantification of trace amount of water in acetonitrile, acetone and ethanol was established using the as-synthesized nanosheet sensor with the detection sensitivity (<0.01% v/v) superior to the conventional Karl Fischer titration. Upon exposure to Fe3+ or Cr2O72-, the intense blue emission of the aqueous colloidal dispersion of 2D-Zn-NS-P was selectively quenched even in the coexistence of common inorganic interferents. The prohibition of the water-mediated ESPT process and local emission, induced by the coordination of ESPT fluorophore with Fe3+ or by Cr2O72- competitively absorbs the excitation energy, was proposed to responsible for the fluorescence turn-off sensing of the respective analytes. The present study offers the attractive prospect to develop the ESPT-based fluorescent MOF nanosheets by covalent post-synthetic modification strategy as multi-functional sensors for detection of target analytes.

A Nitro Functionalized MOF with Multi-Enzyme Mimetic Activities for the Colorimetric Sensing of Glucose at Neutral pH

Benefiting from the advantages like large surface area, flexible constitution, and diverse structure, metal-organic frameworks (MOFs) have been one of the most ideal candidates for nanozymes. In this study, a nitro-functionalized MOF, namely NO₂-MIL-53(Cu), was synthesized. Multi-enzyme mimetic activities were discovered on this MOF, including peroxidase-like, oxidase-like, and laccase-like activity. Compared to the non-functional counterpart (MIL-53(Cu)), NO₂-MIL-53(Cu) displayed superior enzyme mimetic activities, indicating a positive role of the nitro group in the MOF. Subsequently, the effects of reaction conditions on enzyme mimetic activities were investigated. Remarkably, NO₂-MIL-53(Cu) exhibited excellent peroxidase-like activity even at neutral pH. Based on this finding, a simple colorimetric sensing platform was developed for the detection of H₂O₂ and glucose, respectively. The detection liner range for H₂O₂ is 1-800 μM with a detection limit of 0.69 μM. The detection liner range for glucose is linear range 0.5-300 μM with a detection limit of 2.6 μM. Therefore, this work not only provides an applicable colorimetric platform for glucose detection in a physiological environment, but also offers guidance for the rational design of efficient nanozymes with multi-enzyme mimetic activities.

Fluorescence turn-off sensing strategy based on Al-based MOF for selective detection of tricresyl phosphate

Tricresyl phosphate (TCP), a notable emerging pollutant with a high bioconcentration factor and biotoxicity, is a typical representative of aryl-organophosphorus flame retardants. The electrochemical and chromatographic technologies used in conventional TCP detection have a variety of drawbacks. Hence, it is crucial to suggest an easy, accurate, and selective method for detecting TCP. In this study, we presented a brand-new method based on NH₂-MIL-53(Al) nanoprobe for the direct luminescence assay of TCP. NH₂-MIL-53(Al) possessed an excellent crystal structure and superior optical qualities. Notably, the introduction of TCP caused a considerable dampening of the photoluminescence signal of the nanoprobe. The fluorescence response based on static quenching was verified by fluorescence lifetime decay curves. The thermodynamic analysis further concluded that TCP and nanoprobe spontaneously produced non-fluorescent complexes due to hydrophobic interaction. The quenching efficiency (F₀-F)/F₀ of the nanoprobe and the TCP concentration displayed good linearity in the scope of 0.3-3.0 μM (R² = 0.996), and the LOD was 0.058 μM under the ideal detection conditions. More significantly, the technique was effectively used to identify TCP in lake and tap water (RSD ≤5.79%), which provided a fresh perspective on how to recognize OPFRs in environmental water.

Post-exfoliation functionalisation of metal-organic framework nanosheets via click chemistry

The liquid exfoliation of layered metal-organic frameworks (MOFs) to form nanosheets (MONs) exposes buried functional groups making them useful in a range of sensing and catalytic applications. Here we show how high yielding click reactions can be used post-exfoliation to systematically modify the surface chemistry of MONs allowing for tuning of their surface properties and their use in new applications. A layered amino-functionalised framework is converted through conventional post-synthetic functionalisation of the bulk MOF to form azide functionalised frameworks of up to >99% yield. Ultrasonic liquid exfoliation is then used to form few-layer nanosheets, which are further functionalised through post exfoliation functionalisation using Cu(I)-catalysed azide-alkyne cycloaddition reactions. Here we demonstrate the advantages of post-exfoliation functionalisation in enabling: (1) a range of functional groups to be incorporated in high yields; (2) tuning of nanosheet surface properties without the need for extensive recharacterisation; (3) the addition of fluorescent functional groups to enable their use in the sensing of hazardous nitrobenzene. We anticipate that the versatility of different functional groups that can be introduced through high yielding click reactions will lead to advances in the use of MONs and other 2D materials for a variety of applications.

Zwitterionic Luminescent 2D Metal-Organic Framework Nanosheets (LMONs): Selective Turn-On Fluorescence Sensing of Dihydrogen Phosphate

While a plethora of organic linkers based on carboxylic acids have been utilized in the construction of MOFs, zwitterionic linkers that typify the attributes of naturally occurring amino acids have been exploited only scarcely to the best of our knowledge. Zwitterionic interior characteristics should be expected to impart unique properties to the resultant MOFs with a high potential to interact with guest species through electrostatic interactions. In our investigations with bis(p-carboxyphenyl)imidazolylarenes as a novel class of linkers for the development of functional MOFs, we have found that bisimidazole-tetracarboxylic acid H₄DMBI undergoes metal-assisted self-assembly with Zn(NO₃)₂ to yield a layered MOF (Zn-DMBI). In the latter, the linker serves as a two-connecting linker with imidazoles and carboxylic acids behaving as zwitterions. The layers are offset stacked in the crystal structure and are bound firmly by hydrogen bonds between imidazolium and carboxylate ions. Such a packing precludes fluorescence from being observed due to self-quenching. However, exfoliation into zwitterionic 2D metal-organic nanosheets (MONs) by sonication in methanol for 1 h liberates palpable fluorescence. Furthermore, the suspension of luminescent MONs (LMONs) in methanol permits selective sensing of anions; in particular, dihydrogen phosphate (H₂PO₄^-) that is complementary to the zwitterions in terms of hydrogen bond donor and acceptor sites is observed with fluorescence enhancement by 120%, leading to its detection at a sub-parts-per-million (0.13 ppm) level. Thus, access to zwitterionic 2D MONs and their application for selective anion sensing with "turn-on" fluorescence are demonstrated by a rational de novo bottom-up approach.

A series of bis-pyridyl-bis-amide-modulated metal–organic frameworks: formation, transformation and selectivity for the efficient detection of multiple analytes

A series of LMOFs have been structurally characterized, which display a remarkable fluorescence behavior and can be used as outstanding candidates in the selective sensing of multiple analytes with low limits of detection.

A series of novel Co(ii)-based MOFs: syntheses, structural diversity, and various properties

Three novel Co(ii)-based MOFs, having structural diversities and various properties are successfully synthesized.