Highly thermally stable Cr3+ and Yb3+ codoped Gd2GaSbO7 phosphors for broadband near-infrared applications

Realize short-wave infrared luminescence in NaScP2O7:Cr3+,Yb3+ phosphor: Spectral and energy transfer

Short-wave infrared emitting phosphors have extensive applications for spectroscopy technology. The near-infrared phosphor NaScP2O7:Cr3+ that we present in this work has a full width at half maximum (FWHM) of approximately 196 nm, which ranges from 700 to 1200 nm. To achieve efficient short-wave infrared, Yb3+ ions were co-doped. The NaScP2O7:Cr3+,Yb3+ material emitted infrared bands with peaks at 970 and 1003 nm upon excitation at450 nm. Benefitting from energy transfer (ET), the light in the 900-1200 nm from Yb3+ is effectively enhanced. Photoluminescence spectra, thermal quenching, and decay curves of Cr3+/Yb3+ single and codoped NaScP2O7 were investigated. An internal quantum yield of 29.6 % wasdemonstrated by the optimized phosphor NaScP2O7:Cr3+,Yb3+. Furthermore, The final fabrication of the short-wave infrared pc-LED was done through the combination of a blue-emitting chip and NaScP2O7:Cr3+,Yb3+ phosphor, thereby showing great promise for real implementations.

Luminescence properties and energy transfer of broadband NIR phosphor Li2MgZrO4: 1.0%Cr3+, y%Yb3

The discovery of high thermal stability, broad-band near-infrared (NIR) fluorescent phosphors holds significant potential in applications such as non-destructive testing, promoting plant growth, and night vision devices. In this study, a novel broad-band NIR phosphors Li2MgZrO4 (LMZ): 1.0 %Cr3+, y%Yb3+ were synthesized via a high-temperature solid-state reaction method, with the optimal doping concentration found to be y = 1.5. These phosphors exhibited broad NIR emission in the range of 700-1050 nm by effective energy transfer from Cr3+ to Yb3+. The maximum full width at half maximum (FWHM) of the Cr3+/Yb3+ co-doped LMZ phosphor is 270 nm. The thermal stability of the phosphors was improved with Yb3+ co-doping. Additionally, energy transfer from Cr3+ to Yb3+ was confirmed through luminescence spectra and lifetime analysis. Finally, NIR pc-LED devices composed of a 460 nm ultraviolet chip and LMZ: 1.0 %Cr3+, 1.5 %Yb3+ phosphors were fabricated, offering a highly promising source of invisible light. These results demonstrate the wide-ranging potential applications of this novel, high thermal stability, and ultra-broad NIR emitting fluorescent phosphor.

An efficient blue-violet phosphor: an advanced material designed for high-quality full-spectrum lighting

A highly efficient phosphor with exceptional luminescence properties is crucial for achieving high-quality solid-state white-light illumination. Here, this paper presents a groundbreaking discovery, an innovative blue-violet emitting Ba1.31Sr3.69(BO3)3Cl:Ce3+ (BSBCl:Ce3+) phosphor designed with remarkable thermal stability and quantum efficiency for full spectrum white light-emitting diodes (WLEDs). By employing a high-temperature solid-phase method, we synthesized various BSBCl:xCe3+ phosphors with different Ce3+ doping concentrations. Remarkably, BSBCl:0.03Ce3+ displays a broad excitation band from 250 nm to 400 nm, rendering it compatible with commercial near-ultraviolet (UV) LED chips. Under 330 nm excitation, this phosphor emits blue light with an astonishing 88.2% internal quantum efficiency (IQE) and an impressive 60.9% external quantum efficiency (EQE). Notably, when employed in the temperature range of 298-473 K, the synthesized BSBCl:0.03Ce3+ phosphor exhibits exceptional color stability and thermal stability (I423 K/I298 K = 83%). Utilizing BSBCl:0.03Ce3+ as the blue-violet emitting component in the fabrication of WLED devices has demonstrated significant advancements in the color rendering index. These findings underscore the potential of BSBCl:Ce3+ phosphors for a wide range of applications in health-oriented indoor illumination.

Broadband short-wave near-infrared-emitting phosphor MgNb2O6:Cr3+ for pc-LED applications

Broadband short-wave near-infrared (NIR) phosphor-converted light-emitting diodes (pc-LEDs) have been attracting keen interest for miniature NIR spectroscopy, while still lacking sufficient novel broadband NIR-emitting phosphors. Herein, we report a novel MgNb2O6:Cr3+ polycrystalline phosphor with a broad NIR emission band centered at 970 nm and a large full-width at half-maximum of approximately 155 nm under excitation of bluish-green light at around 515 nm. The optimized phosphor MgNb2O6:1%Cr3+ features a high internal quantum efficiency (IQE) of ∼85.5% and a moderate external QE of 25.2%. The fluorescence properties determined by two distorted hexa-coordination octahedral sites (i.e. [MgO6] and [NbO6]), low crystal field strength (Dq/B ∼ 1.65), and Cr3+-doping concentration were systematically investigated for comprehensive understanding of photophysical mechanisms. Besides, this broadband NIR phosphor MgNb2O6:Cr3+ exhibits a moderate thermal quenching of 21.4%@373 K for pc-LED application. An NIR pc-LED self-built by combining the optimal phosphor with a commercial cyan of ∼515 nm exhibits an NIR output power increase from 3.19 to 11.38 mW as the drive current is varied from 40 to 220 mA. With the help of this prototype pc-LED device, multiple applications were successfully performed to clearly recognize blood vessel distributions in the human finger, penetrate a plastic cap, and distinguish multi-color text. Undoubtedly, further development of such broadband short-wave NIR-emitting phosphors will make novel pc-LED devices for significant applications in biomedical imaging, nondestructive safety detection, intelligent identification, etc.

Spectrally tunable near-infrared photoluminescence in MP3O9:Cr3+ (M = Al, Ga, In) phosphate phosphors

Modulation of the octahedral crystal field environment of Cr3+ is an effective approach to achieve tunable emission. Here, we prepared a series of broadband MP3O9:Cr3+ (M = Al, Ga, In) near-infrared (NIR) phosphors, and cubic AlP3O9:Cr3+ (APO-c:Cr3+) and monoclinic AlP3O9:Cr3+ (APO-m:Cr3+) phosphors were prepared by controlling the synthesis temperature. The emission wavelength was tuned from 787 nm for APO-c:Cr3+ to 894 nm for monoclinic InP3O9:Cr3+ (IPO:Cr3+) by regulating the M ion and reducing the crystal field intensity. Excitingly, the MP3O9:Cr3+ (M = Al, Ga, In) family shows excellent thermal stability; the emission intensity of APO-c:Cr3+, APO-m:Cr3+ and monoclinic GaP3O9:Cr3+ (GPO:Cr3+) can still maintain 95.6%, 86% and 86% of that at room temperature when heating to 423 K, respectively. An NIR LED device was prepared by incorporating GPO:Cr3+ and a blue light LED, demonstrating the potential application in night vision and non-destructive testing.

Achieving Broadband NIR-I to NIR-II Emission in an All-Inorganic Halide Double-Perovskite Cs2NaYCl6:Cr3+ Phosphor for Night Vision Imaging

Near-infrared phosphor-converted light-emitting diodes (NIR pc-LEDs) offer numerous advantages, including compact size, tunable emission spectra, energy efficiency, and high integration potential. These features make them highly promising for various applications, such as night vision monitoring, food safety inspection, biomedical imaging, and theragnostics. All-inorganic halide double-perovskite materials, known for their large absorption cross section, excellent defect tolerance, and long carrier diffusion radius, serve as unique matrices for constructing near-infrared fluorescent materials. In this study, we successfully prepared the all-inorganic metal halide double-perovskite Cs2NaYCl6:Cr3+ using a grinding-sintering method. A small fraction of the [YCl6] octahedra within the host material's lattice was substituted with Cr3+ ions, resulting in the creation of the Cs2NaYCl6:Cr3+ phosphor. When excited with λ = 310 nm UV light, the phosphor exhibited a broad emission range spanning from 800 to 1400 nm, covering the NIR-I and NIR-II regions. It had a broad bandwidth emission of 185 nm and achieved a fluorescence quantum yield of 20.2%. The unique broadband emission of the phosphor originates from the weak crystal field environment provided by the Cs2NaYCl6 host matrix, which enhances the luminescence properties of the Cr3+ ions. To create NIR pc-LEDs, the phosphor was encapsulated onto a commercially available UV LED chip operating at 310 nm. The potential application of these NIR pc-LEDs in night vision imaging was successfully validated.

Broadband Near-Infrared-Emitting Phosphors with Suppressed Concentration Quenching in a Two-Dimensional Structure

For inorganic luminescent materials with activators, the energy yield is usually observed to decrease with an increase in activator concentration, which is known as the concentration quenching effect. To inhibit this phenomenon, a common strategy is to increase the distance between activators. Most previous reports have focused on the three-dimensional crystal lattice, and there have been few reports about two-dimensional layered structure. Herein, we synthesized a novel Cr³⁺-activated near-infrared (NIR) phosphor Li₂Sr₂Al(PO₄)₃ (LSAPO) with layered structure, and in such a two-dimensional structure, we proved experimentally that the concentration quenching was suppressed. Under 460 nm excitation, LSAPO:Cr³⁺ gave a broad NIR emission band (700-1200 nm) centered at 823 nm with a full width at half-maximum (fwhm) of 178 nm and a broad absorption band, indicating its potential application in NIR spectroscopy. Moreover, by codoping Cr³⁺ and Yb³⁺ ions, we further widened the emission bandwidth to ∼230 nm of fwhm, the internal quantum efficiency increased from 54% to 61%, and the thermal stability was improved. The fabricated NIR device with a LSAPO:Cr³⁺,Yb³⁺ phosphor coupled with blue chips can be applied in night-vision technologies and medical fields.