Post-synthetic modifications (PSM) on metal-organic frameworks (MOFs) for visible-light-initiated photocatalysis

A novel porphyrin MOF catalyst for efficient conversion of CO2 with propargyl amines

The capture and conversion of carbon dioxide (CO2) into valuable chemical products under mild conditions is an important and challenging approach for contemporary industry. Carboxylic acid ligands are widely used in the development of functionalized metal organic framework materials due to their excellent stability. Herein, a novel mixed-metal organic framework Cu-TCPP(Fe) was assembled from iron-(Fe)-porphyrin ligands, which can efficiently catalyze the reaction of propargylic amines and CO2 to synthesize 2-oxazolidinones.

A comprehensive study about functionalization and de-functionalization of MOF-808 as a defect-engineered Zr-MOFs for selective catalytic oxidation

In metal-organic frameworks (MOFs), confined space as a chemical nanoreactor is as essential as coordinatively unsaturated metal site catalysis. The properties of MOFs can be adjusted through the incorporation of functional groups and open metal sites in frameworks that can modify the catalytic performance. In this regard, a set of defect-engineered MOFs, Ex-MOF-808(NH2, NO2, H) and Mix-MOF-808(NH2, NO2, H), were synthesized by ultrasonic-assisted linker exchange approach (Ex-MOFs) and solvothermal mixing ligand method (Mix-MOFs), respectively. Further, the relationship between the preparation method, structural properties, and catalytic efficiency of the prepared materials in the selective oxidation of methyl phenyl sulfide (MPS) has been investigated. By analyzing zeta potential, it was found that in the exchange method, the amount of defect and functional groups on the surface of MOFs are more than in the mixing method, which also affects the catalytic activity. In our contribution, mix-MOF-808(NO2) carrying nitro groups at their organic linkers, which has a well-dispersion of nitro groups at the framework exhibits selective conversion of MPS to sulfone (91 %). Furthermore, the performance of stable heterogeneous catalysts was investigated for three cycles, which demonstrated their great potential for advanced catalytic oxidation.

Enhanced adsorption and removal of Cd(II) from aqueous solution by amino-functionalized ZIF-8

Zeolite imidazolate framework-8 (ZIF-8), which is a special subgroup of metal-organic frameworks (MOFs), was synthesized and modified by ethylenediamine (ZIF-8-EDA) to prepare an efficient adsorbent for the high sorption of Cd2+ ions from solution. The synthesized and modified ZIF-8 (ZIF-8-EDA) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS), and transmission electron microscopy (TEM) analysis. The optimum conditions for dosage of adsorbent, initial ion concentration, pH, and contact time were 0.05 g/l, 50 mg/l, 6, and 60 min, respectively, for cadmium ion sorption from aqueous solutions with a removal efficiency of 89.7% for ZIF-8 and 93.5% for ZIF-8-EDA. Adsorption kinetics and equilibrium data were analyzed using the Langmuir and Freundlich equations. The Langmuir model fitted the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for the cadmium ions was 294.11(mg/g). The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicated that the adsorption process was feasible, spontaneous, and endothermic at 20-50 °C. Based on the results, the amino functionalized ZIF-8 had improved adsorption performance due to the replacing of the starting linker with organic ligands that had effective functional groups, leading to chemical coordination due to the interaction of metal ions with the non-bonding pair of electrons on the N atoms of the amino functional group. The selectivity toward metal ion adsorption by ZIF-8-EDA was Cd2+ > Pb2+ > Ni2+‏.

A review of metal-organic framework (MOF) materials as an effective photocatalyst for degradation of organic pollutants

Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.

Multivariate metal-organic frameworks generated through post-synthetic modification: impact and future directions

Reticular chemistry has proven to be invaluable over time, thanks to the structural versatility, and tailored porosity observed in structures like metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and metal-organic polyhedra (MOPs). Despite the wide array of ligands and metals available for synthesizing MOFs, they are still somewhat constrained by the reliance on de novo conditions and the focus on generating MOFs with single ligand and metal. To surpass these limitations, researchers have established strategies to generate multivariate (MTV) MOF structures incorporating more than one ligand/metal into the crystal lattice. MTV-MOFs have demonstrated enhanced properties by virtue of the additional functionalities incorporated within their structures. One approach to developing MTV-MOFs is through post-synthetic modification (PSM), where new functionalities are introduced after the initial synthesis, thereby achieving the enhanced properties of MTV-MOFs even in cases where the new functionalities are incompatible with MOF synthesis.

A mini review on metal-organic framework-based electrode materials for capacitive deionization

Capacitive deionization (CDI) is an electrochemical method of extracting ions from solution at potentials below electrolysis. It has various applications ranging from water remediation and desalination to heavy metal removal and selective resource recovery. A CDI device applies an electrical charge across two porous electrodes to attract and remove ions without producing waste products. It is generally considered environmentally friendly and promising for sustainability, yet ion removal efficiency still falls short of more established filtration methods. Commercially available activated carbon is typically used for CDI, and its ion adsorption capacity is low at approximately 20-30 mg g-1. Recently, much interest has been in the highly porous and well-structured family of materials known as metal-organic frameworks (MOFs). Most MOFs are poor conductors of electricity and cannot be directly used to make electrodes. A common workaround is to pyrolyze the MOF to convert its organic components to carbon while maintaining its underlying microstructure. However, most MOF-derived materials only retain partial microstructure after pyrolysis and cannot inherit the robust porosity of the parent MOFs. This review provides a systematic breakdown of structure-performance relationships between a MOF-derived material and its CDI performance based on recent works. This review also serves as a starting point for researchers interested in developing MOF-derived materials for CDI applications.

Achiral Sm(III)-Based Metal-Organic Framework as a Luminescence Sensor for Enantiodiscrimination of Quinine and Quinidine

The effective discrimination and determination of the chiral antimalarial drugs quinine (QN) and quinidine (QD) are extremely important for human health. Herein, a 2D achiral Sm-based metal-organic framework (IMU-MOF1 = [Sm(tpba)(L)]n, where Htpba = 4-(2,2':6″,2'-terpyridin)-4'-ylbenzioc acid and H2L = 2,2'-biquinoline-4,4'-dicarboxylic acid) was successfully prepared by the solvothermal method. More importantly, IMU-MOF1 was designed as an ultrasensitive fluorescent probe for the identification of chiral enantiomer drugs. The limits of detection for QN and QD are 4.24 × 10-11 and 7.54 × 10-12 M, respectively. Furthermore, it was demonstrated that the stronger hydrogen-bonding interactions between IMU-MOF1 and quinine furnish a more efficient energy transfer to the ligands in the sensing process, resulting in a significant fluorescence enhancement of IMU-MOF1.

Visible-light-induced photocatalytic CO2 reduction over zirconium metal organic frameworks modified with different functional groups

The reduction of CO₂ into high value-added chemicals and fuels by a photocatalytic technology can relieve energy shortages and the environmental problems caused by greenhouse effects. In the current work, an amino-functionalized zirconium metal organic framework (Zr-MOF) was covalently modified with different functional groups via the condensation of Zr-MOF with 2-pyridinecarboxaldehyde (PA), salicylaldehyde (SA), benzaldehyde (BA), and trifluoroacetic acid (TA), named Zr-MOF-X (X = PA, SA, BA, and TA), respectively, through the post-synthesis modification. Compared with Zr-MOF and Zr-MOF-TA, the introduction of PA, SA, or BA into the framework of Zr-MOF can not only enhance the visible-light harvesting and CO₂ capture, but also accelerate the photogenerated charge separation and transfer, thereby improving the photocatalytic ability of Zr-MOF for CO₂ reduction. These results indicate that the modification of Zr-MOF with electron-donating groups can promote the photocatalytic CO₂ reduction. Therefore, the current work provides an instructive approach to improve the photocatalytic efficiency of CO₂ reduction through the covalent modification of MOFs.

Efficient visible light-initiated hydrogenation of nitrobenzene for chemoselective production of aniline, azoxybenzene, azobenzene and hydrazobenzene over CQDs/CdS nanocomposites

Carbon quantum dot (CQD)-decorated CdS nanocomposites were successfully fabricated via the self-assembly of CdS in the presence of preformed CQDs and were found to be efficient photocatalysts for the hydrogenation of nitrobenzene under visible light. Due to the presence of the frustrated Lewis acid-base pairs (FLPs) in their structure, CQDs act as an efficient catalyst to promote the proton-coupled hydrogenation of nitrobenzene over CQDs/CdS nanocomposites. Controllable and chemoselective hydrogenation of nitrobenzene to produce aniline, azoxybenzene, azobenzene and hydrazobenzene can be realized over CQDs/CdS via simply regulating the reaction medium including the hydrogen source, the solvent and the alkalinity. This study provides a highly efficient and economical photocatalytic system for the controllable and chemoselective hydrogenation of nitrobenzene under visible light. This work also highlights the great potential of semiconductor-based photocatalysis in light-initiated organic syntheses.

Building a cobaloxime-based metal-organic framework for photocatalytic aerobic oxidation of arylboronic acids to phenols

Herein, the design and synthesis of an unprecedented cobaloxime-based zirconium metal-organic framework (Zr-TCPCo) with an she net is reported. This heterogeneous material as a photocatalyst exhibits excellent catalytic activity for aerobic oxidation of arylboronic acids to phenols. Recycling experiments demonstrate the stability and reusability of Zr-TCPCo as a robust catalyst.

Recent progress of metal-organic frameworks as sensors in (bio)analytical fields: towards real-world applications

The deployment of metal-organic frameworks (MOFs) in a plethora of analytical and bioanalytical applications is a growing research area. Their unique properties such as high but tunable porosity, well-defined channels or pores, and ease of post-synthetic modification to incorporate additional functional units make them ideal candidates for sensing applications. This is possible because the interaction of analytes with a MOF often results in a change in its structure, eventually leading to a modification of the intrinsic physicochemical properties of the MOF which is then transduced into a measurable signal. The high porosity allows for the adsorption of analytes very efficiently, while the tunable pore sizes/nature and/or installation of specific recognition groups allow modulating the affinity towards different classes of compounds, which in turn lead to good sensor sensitivity and selectivity, respectively. Some figures are given to illustrate the potential of MOF-based sensors in the most relevant application fields, and future challenges and opportunities to their possible translation from academia (i.e., laboratory testing of MOF sensing properties) to industry (i.e., real-world analytical sensor devices) are critically discussed.

Metal-Organic Framework-Based Photocatalysis for Solar Fuel Production

Metal-organic frameworks (MOFs) represent a novel class of crystalline inorganic-organic hybrid materials with tunable semiconducting behavior. MOFs have potential for application in photocatalysis to produce sustainable solar fuels, owing to their unique structural advantages (such as clarity and modifiability) that can facilitate a deeper understanding of the structure-activity relationship in photocatalysis. This review takes the photocatalytic active sites as a particular perspective, summarizing the progress of MOF-based photocatalysis for solar fuel production; mainly including three categories of solar-chemical conversions, photocatalytic water splitting to hydrogen fuel, photocatalytic carbon dioxide reduction to hydrocarbon fuels, and photocatalytic nitrogen fixation to high-energy fuel carriers such as ammonia. This review focuses on the types of active sites in MOF-based photocatalysts and discusses their enhanced activity based on the well-defined structure of MOFs, offering deep insights into MOF-based photocatalysis.

Ni2P NPs loaded on methylthio-functionalized UiO-66 for boosting visible-light-driven photocatalytic H2 production

The UiO-66 family shows promising photocatalytic prospects in water splitting for hydrogen evolution under visible light irradiation due to its suitable band gap and adequate active sites. In this work, novel Ni₂P/UiO-66-(SCH₃)₂ composites were prepared by a simple solvothermal method. These as-synthesized samples were fully characterized by XRD, SEM, TEM, HRTEM, EDS, and XPS methods. The effectiveness of visible light driven photocatalytic water-splitting to produce hydrogen was investigated in the presence of sacrificial agents. The results showed that the optimal hydrogen yield of 5 wt% Ni₂P/UiO-66-(SCH₃)₂ is 3724.22 μmol g^-1 h^-1, reaching almost 187 times that of pristine UiO-66-(SCH₃)₂ (19.93 μmol g^-1 h^-1). Meanwhile, long term cycling stability tests also showed that Ni₂P/UiO-66-(SCH₃)₂ composites present an excellent photocatalytic H₂ production stability. Photoelectrochemical performance analysis revealed that the high catalytic activity of the composite materials could be associated with the synergistic effect of UiO-66-(SCH₃)₂ and Ni₂P. Light stimulates UiO-66-(SCH₃)₂ to generate electrons and holes, and Ni₂P as a cocatalyst could effectively transmit electrons and boost photogenerated charge separation. This work provides a reference for exploring UiO-66 family catalysts with good catalytic activity.

A viologen-functionalized metal-organic framework for efficient CO2 photoreduction reaction

Here, a viologen-functionalized metal-organic framework (MOF), MIL-125-RV2+, was obtained by modification of MIL-125-NH2 with viologen molecules. MIL-125-RV2+, the first viologen-based MOF for photocatalytic CO₂RR, exhibited excellent photocatalytic activity and high selectivity for HCOO^-. The strategy of using photo-responsive color-changing organics to functionalize the MOF is significant for achieving efficient CO₂RR.

Utilization of Low-Concentration CO2 with Molecular Catalysts Assisted by CO2-Capturing Ability of Catalysts, Additives, or Reaction Media

Increasing concentration of atmospheric CO₂ is a worldwide concern and continues to trigger various environmental problems. Photo- or electrocatalytic CO₂ reduction (CO₂-Red) using solar energy, i.e., artificial photosynthesis, is a prospective technique owing to its sustainability and the usefulness of the reaction products. Concentrations of CO₂ in exhaust gases from industries are several % to 20%, and that in the atmosphere is about 400 ppm. Although condensation processes of CO₂ require high energy consumption and cost, pure CO₂ has been used in most of the reported studies for photo- and electrocatalytic CO₂-Red because the reaction between CO₂ and the catalyst could be one of the rate-limiting steps. To address these issues and provide a repository of potential techniques for other researchers, this perspective summarizes the catalytic systems reported for the reduction of low-concentration CO₂, which utilize a combination of catalytic CO₂-Red and CO₂-capturing reactions (or CO₂ adsorption). First, we describe CO₂ insertions into M-X bonds of the catalysts, which increase the rate constants and/or equilibrium constants for CO₂ binding on the catalysts, and modifications of the second coordination sphere to stabilize the CO₂-bound catalysts. Furthermore, we discuss the reaction media used for catalytic CO₂-Red that have the unique effect of increasing CO₂ concentrations around the catalysts. These reaction media include typical CO₂-capturing additives, ionic liquids, and metal-organic frameworks.