Pyridylarsine-based Cu(I) complexes showing TADF mixed with fast phosphorescence: a speeding-up emission rate using arsine ligands

Substituents' Effect on the Photophysics of Trinuclear Copper(I) and Silver(I) Pyrazolate-Phosphine Cages

A series of structurally similar trinuclear macrocyclic copper(I) and silver(I) pyrazolate complexes bearing various short-bite diphosphine R2PCH(R')PR2 ligands are reported. Upon diphosphine coordination, the planar geometry of the initial complexes undergoes bending along the line between two metal atoms coordinated to the phosphorus moieties. The complexes based on dcpm ligands (R = cyclohexyl, R' = H, Ph) do not exhibit dynamic behavior in solution at room temperature on the 31P NMR time scale as it was previously observed for similar trinuclear copper complexes bearing the dppm (R = Ph, R' = H) scaffold. All copper(I) complexes exhibit thermally activated delayed fluorescence (TADF) behavior in the solid state. Importantly, the use of aliphatic substituents on the phosphorus atoms instead of aromatic ones leads to an almost double increase in the quantum efficiency (ΦPL) of photoluminescence by eliminating nonradiative decay from the 3LCPh states of the dppm aromatic rings. The higher donating ability of the substituents in the pyrazolate ligand (CF3 vs CH3) lowers the energy of the metal-centered excited state, allowing for a significant metal impact on the T1 state. Finally, the Ag(I) complex displays an emission efficiency of approximately 14%, being the highest among known trinuclear silver(I) pyrazolate homometallic derivatives.

Thermally Activated Delayed Fluorescence (TADF) Materials Based on Earth-Abundant Transition Metal Complexes: Synthesis, Design and Applications

Materials exhibiting thermally activated delayed fluorescence (TADF) based on transition metal complexes are currently gathering significant attention due to their technological potential. Their application extends beyond optoelectronics, in particular organic light-emitting diodes (OLEDs) and light-emitting electrochemical cells (LECs), and include also photocatalysis, sensing, and X-ray scintillators. From the perspective of sustainability, earth-abundant metal centers are preferred to rarer second- and third-transition series elements, thus determining a reduction in costs and toxicity but without compromising the overall performances. This review offers an overview of earth-abundant transition metal complexes exhibiting TADF and their application as photoconversion materials. Particular attention is devoted to the types of ligands employed, helping in the design of novel systems with enhanced TADF properties.

Synthesis and Photophysical Properties of Silver(I) Coordination Polymers Bridged by Dimethylpyrazine: Comparison of Emissive Excited States between Silver(I) and Copper(I) Congeners

Highly luminescent silver(I) coordination polymers [Ag2X2(PPh3)2(Me2pyz)]n (X = I, Br, Cl; Me2pyz: 2,5-dimethylpyrazine) were prepared together with copper congeners [Cu2X2(PPh3)2(Me2pyz)]n (X = I, Br). All the complexes showed thermally activated delayed fluorescence from the charge-transfer states in the visible region, from blue to red. The isomorphous relationship among the complexes allowed a detailed discussion of the effect of halogenido ligands and crystal packing on their luminescence energy. The relaxation in the emissive excited states (ESs) was determined to be more remarkable in silver complexes than in copper complexes despite their isomorphous structures, and the electronic effect of halogenido ligands was comparable to the effect of relaxation in emissive ESs.

Pseudohalide Ions as Ligands to Tune Architecture and Luminescence of Polymetallic CU(I) Assemblies

The reaction of preassembled Cu(I) bimetallic units {Cu2(dppm)2} and {Cu2(dppa)2} (dppm: bis(diphenylphosphino)methane and dppa: bis(diphenylphosphino)amine) with pseudohalide linkers (azido, dicyanamide, and tricyanomethanide) allows for the quantitative and selective preparation of three discrete tetrametallic metallacycles of formula [Cu4(μ2-dppm)4(N3)2](PF6)2, [Cu4(μ2-dppm)4(N(CN)2)2](PF6)2, and [Cu4(μ2-dppm)4(C(CN)3)4]. To explore further the impact of the linker on the architecture and dimensionality of the molecular edifice, the study was extended to more sophisticated tetradentate cyanocarbanion ligands (tcnsMe-: 2-(methylthio)-1,1,3,3-propanetetracarbonitrile and tcnsEt-: 2-(ethylthio)-1,1,3,3-propanetetracarbonitrile). Three ladder-like one-dimensional coordination polymers and an octametallic metallacycle have been obtained. The careful comparison of the metric and geometrical intramolecular and intermolecular parameters observed in this series of seven derivatives allows for rationalization of their molecular architectures. The subtle balance between the length and steric hindrance of the ligand and the formation of noncovalent interaction networks greatly influences the topology and dimensionality of the resulting assemblies and will be discussed hereafter. The photophysical properties of these seven polymetallic Cu(I) compounds have also been also studied.

From Mono- to Polynuclear 2-(Diphenylphosphino)pyridine-Based Cu(I) and Ag(I) Complexes: Synthesis, Structural Characterization, and DFT Calculations

A series of monometallic Ag(I) and Cu(I) halide complexes bearing 2-(diphenylphosphino)pyridine (PyrPhos, L) as a ligand were synthesized and spectroscopically characterized. The structure of most of the derivatives was unambiguously established by X-ray diffraction analysis, revealing the formation of mono-, di-, and tetranuclear complexes having general formulas MXL3 (M = Cu, X = Cl, Br; M = Ag, X = Cl, Br, I), Ag2X2L3 (X = Cl, Br), and Ag4X4L4 (X = Cl, Br, I). The Ag(I) species were compared to the corresponding Cu(I) analogues from a structural point of view. The formation of Cu(I)/Ag(I) heterobimetallic complexes MM'X2L3 (M/M' = Cu, Ag; X = Cl, Br, I) was also investigated. The X-ray structure of the bromo-derivatives revealed the formation of two possible MM'Br2L3 complexes with Cu/Ag ratios, respectively, of 7:1 and 1:7. The ratio between Cu and Ag was studied by scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX) measurements. The structure of the binuclear homo- and heterometallic derivatives was investigated using density functional theory (DFT) calculations, revealing the tendency of the PyrPhos ligands not to maintain the bridging motif in the presence of Ag(I) as the metal center.

Molecularly Engineered Room-Temperature Phosphorescence for Biomedical Application: From the Visible toward Second Near-Infrared Window

Phosphorescence, characterized by luminescent lifetimes significantly longer than that of biological autofluorescence under ambient environment, is of great value for biomedical applications. Academic evidence of fluorescence imaging indicates that virtually all imaging metrics (sensitivity, resolution, and penetration depths) are improved when progressing into longer wavelength regions, especially the recently reported second near-infrared (NIR-II, 1000-1700 nm) window. Although the emission wavelength of probes does matter, it is not clear whether the guideline of "the longer the wavelength, the better the imaging effect" is still suitable for developing phosphorescent probes. For tissue-specific bioimaging, long-lived probes, even if they emit visible phosphorescence, enable accurate visualization of large deep tissues. For studies dealing with bioimaging of tiny biological architectures or dynamic physiopathological activities, the prerequisite is rigorous planning of long-wavelength phosphorescence, being aware of the cooperative contribution of long wavelengths and long lifetimes for improving the spatiotemporal resolution, penetration depth, and sensitivity of bioimaging. In this Review, emerging molecular engineering methods of room-temperature phosphorescence are discussed through the lens of photophysical mechanisms. We highlight the roles of phosphorescence with emission from visible to NIR-II windows toward bioapplications. To appreciate such advances, challenges and prospects in rapidly growing studies of room-temperature phosphorescence are described.

Mononuclear copper(I) complexes bearing a 3-phenyl-5-(pyridin-4-yl)-1,2,4-triazole ligand: synthesis, crystal structure, TADF-luminescence, and mechanochromic effects

Three new mononuclear heteroleptic copper(I) halide complexes, [CuL(PPh3)2X] (X = Cl, Br, I), based on 3-phenyl-5-(pyridin-4-yl)-1,2,4-triazole (L) and triphenylphosphine (PPh3) ligands, have been prepared by reaction of CuX (X = Cl, Br, I), L and PPh3 in a molar ratio of 1 : 1 : 2 in MeCN solutions. The synthesized complexes exhibit blue light emission in solutions and bright green emission in the crystal state with quantum yields of up to 100%. The luminescence decay analysis and density functional theory calculations revealed that the emission of solid samples at room temperature corresponds to the thermally activated delayed fluorescence, while that at 77 K is assigned to phosphorescence. Utilizing the studied complexes in OLED heterostructures resulted in high-performing green-emitting devices with an external quantum efficiency of up to 13.4%.

Robust and highly emissive copper(I) halide 1D-coordination polymers with triphenylarsine and a series of bridging N-heteroaromatic co-ligands

Various 1D-coordination polymers with dinuclear rhombic {Cu2X2} cores (X = Br, I) were synthesized using a spontaneous evaporation method employing triphenylarsine (AsPh3) and six types of bidentate N-heteroaromatic co-ligands. The coordination polymers exhibited intense emission even at 298 K (quantum yield: up to 0.60), and their emission color was dependent on the N-heteroaromatic co-ligand. The emission efficiencies of these coordination polymers were higher than those of the discrete complexes with AsPh3 and monodentate N-heteroaromatic co-ligands reported in our previous work. In addition, the luminescence of these coordination polymers was more resistant to mechanical stimuli than that of the discrete ones.

TADF and X-ray Radioluminescence of New Cu(I) Halide Complexes: Different Halide Effects on These Processes

A series of complexes [Cu2X2(Pic3PO)2] (X = Cl, Br, I) based on tris(pyridin-2-ylmethyl)phosphine oxide (Pic3PO) has been synthesized. At 298 K, these compounds exhibit thermally activated delayed fluorescence (TADF) of 1(M+X)LCT type with λmax varying from 485 to 545 nm, and quantum efficiency up to 54%. In the TADF process, the halide effect appears as the emission intensification and bathochromic shift of λmax in the following order X = I < Br < Cl. Upon X-ray irradiation, the title compounds emit radioluminescence, the emission bands of which have the same shape as those at TADF, thereby meaning a similar radiative excited state. By contrast to TADF, the halide effect in the radioluminescence is reversed: its intensity grows in the order X = Cl < Br < I, since heavier atoms absorb X-rays more efficiently. These findings essentially contribute to our knowledge about the halide effect in the photo- and radioluminescent Cu(I) halide emitters.

Synthesis and Photophysical Properties of Heavier Pnictogen Complexes

Recent success in the synthesis of π-conjugated heavier pnictogen (As, Sb, and Bi) compounds and their transition metal complexes has led to the current surge in interest that led to significant development in the field of photophysical and optoelectronic properties of heavier pnictogens and their transition metal complexes. The presence of heavier pnictogens (As, Sb and Bi) in the molecular skeleton promotes inter-system crossing (ISC) and reverse inter-system crossing (RISC), because of the heavy atom effect, via altering the intermolecular interactions and orbital energy levels. As a result, π-conjugated heavier pnictogen compounds such as arsines, dibenzoarsepins, arsinoquinoline, heterofluorene, benzo[b]heterole (heterole=arsole, bismole, and stibole) show unique optoelectronic properties such as narrow bandgap, low-energy absorption, and long-wavelength emission than lighter pnictogen-based compounds. This review focuses on recent advances in the synthesis and photophysical properties of heavier pnictogen compounds. The synthesis and photophysical properties of heavier pnictogens are discussed and elaborated.

Fluorescence vs. Phosphorescence: Which Scenario Is Preferable in Au(I) Complexes with Benzothiadiazoles?

The photoluminescence of Au(I) complexes is generally characterized by long radiative lifetimes owing to the large spin-orbital coupling constant of the Au(I) ion. Herein, we report three brightly emissive Au(I) coordination compounds, 1, 2a, and 2b, that reveal unexpectedly short emission lifetimes of 10-20 ns. Polymorphs 2a and 2b exclusively exhibit fluorescence, which is quite rare for Au(I) compounds, while compound 1 reveals fluorescence as the major radiative pathway, and a minor contribution of a microsecond-scale component. The fluorescent behaviour for 1-2 is rationalized by means of quantum chemical (TD)-DFT calculations, which reveal the following: (1) S₀-S₁ and S₀-T₁ transitions mainly exhibit an intraligand nature. (2) The calculated spin-orbital coupling (SOC) between the states is small, which is a consequence of overall small metal contribution to the frontier orbitals. (3) The T₁ state features much lower energy than the S₁ state (by ca. 7000 cm^-1), which hinders the SOC between the states. Thus, the S₁ state decays in the form of fluorescence, rather than couples with T₁. In the specific case of complex 1, the potential energy surfaces for the S₁ and T₂ states intersect, while the vibrationally resolved S₁-S₀ and T₂-S₀ calculated radiative transitions show substantial overlap. Thus, the microsecond-scale component for complex 1 can stem from the coupling between the S₁ and T₂ states.

Thermo-, Mechano-, and Vapochromic Dinuclear Cuprous-Emissive Complexes with a Switchable CH3CN-Cu Bond

A thermo-, mechano-, and vapochromic bimetallic cuprous-emissive complex has been reported, and the origin and application of its tri-stimuli-responsive luminescence have been explored. As revealed by single-crystal structure analysis, thermo- and vapochromic luminescence adjusted by heating at 60 °C and CH₃CN vapor fuming, accompanied by a crystalline-to-crystalline transition, is due to the breaking and rebuilding of the CH₃CN-Cu bond, as supported by ¹H nuclear magnetic resonance (NMR), Fourier-transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetry (TG), and time-dependent density functional theory (TD-DFT) analyses of the CH₃CN-coordinated species [Cu₂(μ-dppa)₂(μ-η¹(N)η²(N,N)-fptz)(CH₃CN)](ClO₄)·H₂O (1) and its CH₃CN-removed derivative [Cu₂(μ-dppa)₂(μ-η¹(N)η²(N,N)-fptz)](ClO₄)·H₂O (2). Luminescence mechanochromism, mixed with a crystalline-to-amorphous transition where the initial crystalline is different for 1 and 2, is mainly assigned as the destruction of the CH₃CN-Cu bonding and/or the O···HN_dppa and OH···N_triazolyl hydrogen bonds. It is also suggested that a rational use of switchable coordination such as weak metal-solvent bonding is a feasible approach to develop multi-stimuli-responsive luminescent materials and devices.

Tris(2-Pyridyl)Arsine as a New Platform for Design of Luminescent Cu(I) and Ag(I) Complexes

The coordination behavior of tris(2-pyridyl)arsine (Py₃As) has been studied for the first time on the example of the reactions with CuI, CuBr and AgClO₄. When treated with CuI in CH₂Cl₂ medium, Py₃As unexpectedly affords the scorpionate complex [Cu(Py₃As)I]∙CH₂Cl₂ only, while this reaction in MeCN selectively leads to the dimer [Cu₂(Py₃As)₂I₂]. At the same time, the interaction of CuBr with Py₃As exclusively gives the dimer [Cu₂(Py₃As)₂Br₂]. It is interesting to note that the scorpionate [Cu(Py₃As)I]∙CH₂Cl₂, upon fuming with a MeCN vapor (r.t., 1 h), undergoes quantitative dimerization into the dimer [Cu₂(Py₃As)₂I₂]. The reaction of Py₃As with AgClO₄ produces complex [Ag@Ag₄(Py₃As)₄](CIO₄)₅ featuring a Ag-centered Ag₄ tetrahedral kernel. At ambient temperature, the obtained Cu(I) complexes exhibit an unusually short-lived photoluminescence, which can be tentatively assigned to the thermally activated delayed fluorescence of (M + X) LCT type (M = Cu, L = Py₃As; X = halogen). For the title Ag(I) complexes, QTAIM calculations reveal the pronounced argentophilic interactions for all short Ag∙∙∙Ag contacts (3.209–3.313 Å).

So Close, Yet so Different: How One Donor Atom Changes Significantly the Photophysical Properties of Mononuclear Cu(I) Complexes

The manipulation of the photophysical properties of molecular emitters can be realized by composing the close environment of the metal center with the "heavier pnictogen atom" effect. Replacing a nitrogen atom with a heavier phosphorus atom in otherwise isostructural molecular systems results in a significant change of the photophysical parameters. Herein, we report on the synthesis of four pairs of novel phosphinine-based and isostructural diimine-based Cu(I) complexes, which feature peculiar photophysical properties, and show how these parameters depend on the "heavier pnictogen atom" effect. The obtained Cu(I) complexes show triplet luminescence with MLCT character, which was investigated by means of spectroscopic and computational methods. It has been found that the photophysical properties of the coordination compounds show a dependency on the rigidity of the ancillary phosphine ligand in an unexpected manner. Replacing the nitrogen atom with a heavier phosphorus atom in otherwise isostructural molecular systems results in a significant change in emission energy and especially in the lifetime of the excited state. The results obtained demonstrate an efficient approach to the design of emissive molecular materials, which allows the construction of luminescent complexes with controlled photophysical properties.

Thermally activated delayed fluorescence in luminescent cationic copper(i) complexes

In this work, the photophysical characteristics of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes were described. The concept of thermally activated delayed fluorescence (TADF) and its development throughout the years was also explained. The importance of ΔE (S1-T1) and spin-orbital coupling (SOC) values on the TADF behavior of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ complexes is discussed. Examples of ΔE (S1-T1) values reported in the literature were collected and some trends were proposed (e.g. the effect of the substituents at the 2,9 positions of the phenanthroline ligand). Besides, the techniques (or calculation methods) used for determining ΔE (S1-T1) values were described. The effect of SOC in TADF was also discussed, and examples of the determination of SOC values by DFT and TD-DFT calculations are provided. The last chapter covers the applications of [Cu(N^N)2]+ and [Cu(N^N)(P^P)]+ TADF complexes and the challenges that are still needed to be addressed to ensure the industrial applications of these compounds.

Structural characterization and luminescence properties of trigonal Cu(i) iodine/bromine complexes comprising cation–π interactions

Trigonal copper(i) complexes comprising cation–π interactions achieve satisfactory photoluminescence properties.