Antimicrobial susceptibility testing by measuring bacterial oxygen consumption on an integrated platform

Disposable electrochemical biosensors for the detection of bacteria in the light of antimicrobial resistance

Persistent and inappropriate use of antibiotics is causing rife antimicrobial resistance (AMR) worldwide. Common bacterial infections are thus becoming increasingly difficult to treat without the use of last resort antibiotics. This has necessitated a situation where it is imperative to confirm the infection to be bacterial, before treating it with antimicrobial speculatively. Conventional methods of bacteria detection are either culture based which take anywhere between 24 and 96 hor require sophisticated molecular analysis equipment with libraries and trained operators. These are difficult propositions for resource limited community healthcare setups of developing or less developed countries. Customized, inexpensive, point-of-care (PoC) biosensors are thus being researched and developed for rapid detection of bacterial pathogens. The development and optimization of disposable sensor substrates is the first and crucial step in development of such PoC systems. The substrates should facilitate easy charge transfer, a high surface to volume ratio, be tailorable by the various bio-conjugation chemistries, preserve the integrity of the biorecognition element, yet be inexpensive. Such sensor substrates thus need to be thoroughly investigated. Further, if such systems were made disposable, they would attain immunity to biofouling. This article discusses a few potential disposable electrochemical sensor substrates deployed for detection of bacteria for environmental and healthcare applications. The technologies have significant potential in helping reduce bacterial infections and checking AMR. This could help save lives of people succumbing to bacterial infections, as well as improve the overall quality of lives of people in low- and middle-income countries.

Combined electrical-electrochemical phenotypic profiling of antibiotic susceptibility of in vitro biofilm models

More than 65% of bacterial infections are caused by biofilms. However, standard biofilm susceptibility tests are not available for clinical use. All conventional biofilm models suffer from a long formation time and fail to mimic in vivo microbial biofilm conditions. Moreover, biofilms make it difficult to monitor the effectiveness of antibiotics. This work creates a powerful yet simple method to form a target biofilm and develops an innovative approach to monitoring the antibiotic's efficacy against a biofilm-associated infection. A paper-based culture platform can provide a new strategy for rapid microbial biofilm formation through capillary action. A combined electrical-electrochemical technique monitors bacterial metabolism rapidly and reliably by measuring microbial extracellular electron transfer (EET) and using electrochemical impedance spectroscopy (EIS) across a microbe-electrode interface. Three representative pathogens, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus, form their biofilms controllably within an hour. Within another hour their susceptibilities to three frontline antibiotics with different action modes (gentamicin, ciprofloxacin, and ceftazidime) are examined. Our antibiotic susceptibility testing (AST) technique provides a quantifiable minimum inhibitory concentration (MIC) of those antibiotics against the in vitro biofilm models and characterizes their action mechanisms. The results will have an important positive effect because they provide immediately actionable healthcare information at a reduced cost, revolutionizing public healthcare.

A novel method to estimate biofilm activity based on enzymatic oxygen release from hydrogen peroxide decomposition

Biofilm is central for biological water treatment processes in recirculating aquaculture systems (RAS). A lack of suitable methods for quantifying biofilm activity, however, makes it difficult to assess and compare the microbial status of biofilm. This type of information of the biofilm will be useful to assess the colonization status of nitrifying biocarriers or to evaluate the effect of disinfectants on the biofilm activity. Here we introduce a novel assay for rapid assessment of microbial activities in the biofilm attached on bioelements from a RAS biofilter. The assay consisted of an intermittent respirometer platform where biofilter elements were exposed to 10 mg/L hydrogen peroxide (H2O2) for 1 h, following concurrent measurements of oxygen release from the decomposition of H2O2 caused by biofilm-associated enzymes. A different number of colonized, mature bioelements from a moving bed biofilter in a freshwater RAS were tested with repeated H2O2 exposure, and compared against their autoclaved forms. A substantial increase in dissolved oxygen (DO) concentration (0.92-2.31 mg O2/L) occurred with mature bioelements during 1 h of H2O2 exposure, compared to small amounts of DO release (≤0.27 mg O2/L) with autoclaved bioelements. This substantiates that H2O2 decomposition by biofilm is mainly governed by microbial enzymatic activities. A monomolecular model fitted well with the observed oxygen release profiles of tested mature bioelements after H2O2 exposure (R2 > 0.98). The kinetic rate constant of net oxygen release (k or , h-1) was proportional (R2 for linear fit = 0.99) to the number of mature bioelements tested. Repeated exposure of H2O2 to the same bioelements did not change k or , which indicates that 10 mg/L H2O2 with an exposure time of 1 h does not suppress enzymatic activity in biofilm. Our study provides a new rapid method that allows simple quantification of microbial activity in biofilm samples from aquaculture systems, which could potentially be also applied to study biofilm from wastewater treatment plants and other industries.

Direct single-cell antimicrobial susceptibility testing of Escherichia coli in urine using a ready-to-use 3D microwell array chip

Empirical antibiotic therapies are prescribed for treating uncomplicated urinary tract infections (UTIs) due to the long turnaround time of conventional antimicrobial susceptibility testing (AST), leading to the prevalence of multi-drug resistant pathogens. We present a ready-to-use 3D microwell array chip to directly conduct comprehensive AST of pathogenic agents in urine at the single-cell level. The developed device features a highly integrated 3D microwell array, offering a dynamic range from 10² to 10⁷ CFU mL^-1, and a capillary valve-based flow distributor for flow equidistribution in dispensing channels and uniform sample distribution. The chip with pre-loaded reagents and negative pressure inside only requires the user to initiate AST by loading samples (∼3 s) and can work independently. We demonstrate an accessible sample-to-result workflow, including syringe filter-based bacteria separation and rapid single-cell AST on chip, which enables us to bypass the time-consuming bacteria isolation and pre-culture, speeding up the AST in ∼3 h from 2 days of conventional methods. Moreover, the bacterial concentration and AST with minimum inhibitory concentrations can be assessed simultaneously to provide comprehensive information on infections. With further development for multiple antibiotic conditions, the Dsc-AST assay could contribute to timely prescription of targeted drugs for better patient outcomes and mitigation of the threat of drug-resistant bacteria.

A 3D-printed microfluidic gradient generator with integrated photonic silicon sensors for rapid antimicrobial susceptibility testing

With antimicrobial resistance becoming a major threat to healthcare settings around the world, there is a paramount need for rapid point-of-care antimicrobial susceptibility testing (AST) diagnostics. Unfortunately, most currently available clinical AST tools are lengthy, laborious, or are simply inappropriate for point-of-care testing. Herein, we design a 3D-printed microfluidic gradient generator that automatically produces two-fold dilution series of clinically relevant antimicrobials. We first establish the compatibility of these generators for classical AST (i.e., broth microdilution) and then extend their application to include a complete on-chip label-free and phenotypic AST. This is accomplished by the integration of photonic silicon chips, which provide a preferential surface for microbial colonization and allow optical tracking of bacterial behavior and growth at a solid-liquid interface in real-time by phase shift reflectometric interference spectroscopic measurements (PRISM). Using Escherichia coli and ciprofloxacin as a model pathogen-drug combination, we successfully determine the minimum inhibitory concentration within less than 90 minutes. This gradient generator-based PRISM assay provides an integrated AST device that is viable for convenient point-of-care testing and offers a promising and most importantly, rapid alternative to current clinical practices, which extend to 8-24 h.