Structural insights into Lewis acid- and F4TCNQ-doped conjugated polymers by solid-state magnetic resonance spectroscopy

Design Principles for Enhancing Both Carrier Mobility and Stretchability in Polymer Semiconductors via Lewis Acid Doping

With the rise of skin-like electronics, devices are increasingly coming into close contact with the human body, creating a demand for polymer semiconductors (PSCs) that combine stretchability with reliable electrical performance. However, balancing mechanical robustness with high carrier mobility remains a challenge. To address this, tris(pentafluorophenyl)borane (BCF) for Lewis acid doping is proposed to improve charge mobility while enhancing stretchability by increasing structural disorder. Through systematic investigation, several key structural principles have been identified to maximize the effectiveness of BCF doping in stretchable PSCs. Notably, increasing the lamellar stacking distance and reducing crystallinity facilitate the incorporation of BCF into the alkyl side-chain regions, thereby enhancing both mobility and stretchability. Conversely, stronger Lewis base groups in the main chain negatively impact these improvements. These results demonstrate that with a small addition of BCF, a two-fold increase in carrier mobility is achieved while simultaneously enhancing the crack onset strain to 100%. Furthermore, doped PSCs exhibit stable mobility retention under repeated 30% strains over 1000 cycles. This method of decoupling carrier mobility from mechanical properties opens up new avenues in the search for high-mobility stretchable PSCs.

Sequential Cascade Doping of Conjugated-Polymer-Wrapped Carbon Nanotubes for Highly Electrically Conductive Platforms

To explore a highly conductive flexible platform, this study develops PIDF-BT@SWCNT by wrapping single-walled carbon nanotubes (SWCNTs) with a conjugated polymer, PIDF-BT, known for its effective doping properties. By evaluating the doping behaviors of various dopants on PIDF-BT, appropriate dopant combinations for cascade doping are selected to improve the doping efficiency of PIDF-BT@SWCNT. Specifically, using F4TCNQ or F6TCNNQ as the first dopant, followed by AuCl3 as the second dopant, demonstrates remarkable doping efficiency, surpassing that of the individual dopants and yielding an exceptional electrical conductivity exceeding 6000 S/cm. Characterization using X-ray photoelectron spectroscopy and Raman spectroscopy elucidates the doping mechanism, revealing an increase in the proportion of electron-donating atoms and the ratio of quinoid structures upon F4TCNQ/AuCl3 cascade doping. These findings offer insights into optimizing dopant combinations for cascade doping, showcasing its advantages in enhancing doping efficiency and resulting electrical conductivity compared with single dopant processes.

Doping of molecular semiconductors through proton-coupled electron transfer

The chemical doping of molecular semiconductors is based on electron-transfer reactions between the semiconductor and dopant molecules; here, the redox potential of the dopant is key to control the Fermi level of the semiconductor1,2. The tunability and reproducibility of chemical doping are limited by the availability of dopant materials and the effects of impurities such as water. Here we focused on proton-coupled electron-transfer (PCET) reactions, which are widely used in biochemical processes3,4; their redox potentials depend on an easily handled parameter, that is, proton activity. We immersed p-type organic semiconductor thin films in aqueous solutions with PCET-based redox pairs and hydrophobic molecular ions. Synergistic reactions of PCET and ion intercalation resulted in efficient chemical doping of crystalline organic semiconductor thin films under ambient conditions. In accordance with the Nernst equation, the Fermi levels of the semiconductors were controlled reproducibly with a high degree of precision-a thermal energy of about 25 millielectronvolts at room temperature and over a few hundred millielectronvolts around the band edge. A reference-electrode-free, resistive pH sensor based on this method is also proposed. A connection between semiconductor doping and proton activity, a widely used parameter in chemical and biochemical processes, may help create a platform for ambient semiconductor processes and biomolecular electronics.

A croconic acid-derived narrow band gap conjugated microporous polymer

Croconic acid, a novel highly electron-deficient building block, was introduced into a conjugated microporous polymer (CTPA). The CMP possesses strong donor-acceptor interactions, which resulted in near-IR absorption (red edge ∼1350 nm), a narrow bandgap (<1 eV) and high electrical conductivity upon doping (0.1 S m^-1). Compared to the squaric acid congener (STPA), CTPA showed superior optical, electronic and electrical properties.

Multiple acquisitions in a single scan: exhausting abundant 1H polarization at fast MAS

Proton-detected solid-state NMR spectroscopy is emerging as a unique tool for atomic characterization of organic solids due to the boost of resolution and sensitivity afforded by the combined use of high magnetic field and ultrafast magic angle spinning (MAS). Here, we proposed a new set of proton-detected solid-state NMR sequences that hybrid multi-dimensional ¹H-¹H homonuclear chemical shift correlation (HOMCOR) and two-dimensional ¹H-¹³C heteronuclear chemical shift correlation (HETCOR) sequences into a single experiment, enabling the simultaneous acquisition of multidimensional HOMCOR and HETCOR spectra and thus significant time savings. Based on the core idea of exhausting ¹H polarization in each transient scan, we firstly demonstrated that 3D ¹H multiple-quantum (MQ) HOMCOR sequence can be combined with 2D HETCOR sequence into a single experiment, leading to the simultaneous acquisition of a 3D ¹H MQ HOMCOR and a 2D ¹H-¹³C HETCOR spectrum. Besides, we also showed that 2D ¹H/¹H double-quantum/single-quantum (DQ/SQ) and single-quantum/single-quantum (SQ/SQ) HOMCOR sequence can be simultaneously combined with HETCOR sequence either, and thus three spectra can be simultaneously obtained from one experiment, including 2D ¹H DQ/SQ, 2D ¹H SQ/SQ and 2D ¹H-¹³C HETCOR spectra. Since there is only one recycle delay in each experiment, experimental time is substantially reduced compared to separate acquisition of each multi-dimensional solid-state NMR spectrum. Furthermore, those new sequences can be implemented on any standard solid-state spectrometer with only one receiver. Thus, we foresee that these approaches can be valuable for the study of a broad range of molecular systems, including polymers, pharmaceuticals, covalent-organic frameworks (COF) and so on.

Visualisation of individual dopants in a conjugated polymer: sub-nanometre 3D spatial distribution and correlation with electrical properties

While molecular doping is ubiquitous in all branches of organic electronics, little is known about the spatial distribution of dopants, especially at molecular length scales. Moreover, a homogeneous distribution is often assumed when simulating transport properties of these materials, even though the distribution is expected to be inhomogeneous. In this study, electron tomography is used to determine the position of individual molybdenum dithiolene complexes and their three-dimensional distribution in a semiconducting polymer at the sub-nanometre scale. A heterogeneous distribution is observed, the characteristics of which depend on the dopant concentration. At 5 mol% of the molybdenum dithiolene complex, the majority of the dopant species are present as isolated molecules or small clusters up to five molecules. At 20 mol% dopant concentration and higher, the dopant species form larger nanoclusters with elongated shapes. Even in case of these larger clusters, each individual dopant species is still in contact with the surrounding polymer. The electrical conductivity first strongly increases with dopant concentration and then slightly decreases for the most highly doped samples, even though no large aggregates can be observed. The decreased conductivity is instead attributed to the increased energetic disorder and lower probability of electron transfer that originates from the increased size and size variation in dopant clusters. This study highlights the importance of detailed information concerning the dopant spatial distribution at the sub-nanometre scale in three dimensions within the organic semiconductor host. The information acquired using electron tomography may facilitate more accurate simulations of charge transport in doped organic semiconductors.

Combining heteronuclear correlation NMR with spin-diffusion to detect relayed Cl-H-H and N-H-H proximities in molecular solids

Analysis of short-to-intermediate range intermolecular interactions offers a great way of characterizing the solid-state organization of small molecules and materials. This can be achieved by two-dimensional (2D) homo- and heteronuclear correlation NMR spectroscopy, for example, by carrying out experiments at high magnetic fields in conjunction with fast magic-angle spinning (MAS) techniques. But, detecting 2D peaks for heteronuclear dipolar coupled spin pairs separated by greater than 3 Å is not always straightforward, particularly when low-gamma quadrupolar nuclei are involved. Here, we present a 2D correlation NMR experiment that combines the advantages of heteronuclear-multiple quantum coherence (HMQC) and proton-based spin-diffusion (SD) pulse sequences using radio-frequency-driven-recouping (RFDR) to probe inter and intramolecular ¹H-X (X = ¹⁴N, ³⁵Cl) interactions. This experiment can be used to acquire 2D ¹H{X}-HMQC filtered ¹H-¹H correlation as well as 2D ¹H-X HMQC spectra. Powder forms of dopamine·HCl and l-histidine·HCl·H₂O are characterized at high fields (21.1 T and 18.8 T) with fast MAS (60 kHz) using the 2D HMQC-SD-RFDR approach. Solid-state NMR results are complemented with NMR crystallography analyses using the gauge-including projector augmented wave (GIPAW) approach. For histidine·HCl·H₂O, 2D peaks associated with ¹⁴N-¹H-¹H and ³⁵Cl-¹H-¹H distances of up to 4.4 and 3.9 Å have been detected. This is further corroborated by the observation of 2D peaks corresponding to ¹⁴N-¹H-¹H and ³⁵Cl-¹H-¹H distances of up to 4.2 and 3.7 Å in dopamine·HCl, indicating the suitability of the HMQC-SD-RFDR experiments for detecting medium-range proximities in molecular solids.

Double Doping of a Low-Ionization-Energy Polythiophene with a Molybdenum Dithiolene Complex

Doping of organic semiconductors is crucial for tuning the charge-carrier density of conjugated polymers. The exchange of more than one electron between a monomeric dopant and an organic semiconductor allows the polaron density to be increased relative to the number of counterions that are introduced into the host matrix. Here, a molybdenum dithiolene complex with a high electron affinity of 5.5 eV is shown to accept two electrons from a polythiophene that has a low ionization energy of 4.7 eV. Double p-doping is consistent with the ability of the monoanion salt of the molybdenum dithiolene complex to dope the polymer. The transfer of two electrons to the neutral dopant was also confirmed by electron paramagnetic resonance spectroscopy since the monoanion, but not the dianion, of the molybdenum dithiolene complex features an unpaired electron. Double doping allowed an ionization efficiency of 200% to be reached, which facilitates the design of strongly doped semiconductors while lessening any counterion-induced disruption of the nanostructure.