1,4,5,8-Naphthalenetetracarboxylic dianhydride grafted phthalocyanine macromolecules as an anode material for lithium ion batteries

Insoluble low-impedance organic battery cathode enabled by graphite grafting towards potassium storage

Organic electrode materials are extensively applied for potassium storage as their sustainability and low cost. However, the organic electrodes' (i) solubility (such as naphthalene-1,4,5,8-tetracarboxylic dianhydride, NTCDA; 2,6-diaminoanthanthraquinone, DAQ, which are easily soluble in organic solvents) and (ii) intrinsic poor conductivity often result in high impedance and inferior electrochemical performance. Herein, the monomers of NTCDA and DAQ were polymerized (PND) to obtain an insoluble organic cathode, and a 5 wt% graphite (G) was also used to graft the PND sheet and increase its conductivity. Consequently, the as-prepared organic cathode (PND-G) achieved a long-life cycling performance of over 1500 cycles at 100 mA g-1. This work may provide guidelines for designing and developing insoluble and high conductive organic electrode materials.

Effective voltammetric tool for Nano-detection of triazine herbicide (1-Chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine) by naphthalene derivative

The development and operation of a nanosensor for detecting the poisonous 1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine (Atrazine) are described in this study for the first time. The carbon electrode (CE) surface was modified with cysteine-substituted naphthalene diimide to create this sensitive platform. The developed nanosensor (NDI-cys/GCE) was evaluated for its ability to sense Atrazine using differential pulse voltammetry and cyclic voltammetry. To achieve the best response from the target analyte, the effects of several parameters were examined to optimize the conditions. The cysteine-substituted naphthalene diimide significantly improved the signals of the Atrazine compared to bare GCE due to the synergistic activity of substituted naphthalene diimide and cysteine molecules. Under optimal conditions, atrazine detection limits at the (NDI-cys/GCE) were reported to be 94 nM with a linear range of 10-100 μM. The developed sensing platform also showed positive results when used to detect the atrazine herbicide in real tap water, wastewater, and milk samples. Furthermore, a reasonable recovery rate for real-time studies, repeatability, and stability revealed that the developed electrochemical platform could be used for sample analysis.

Two Birds One Stone: Graphene Assisted Reaction Kinetics and Ionic Conductivity in Phthalocyanine-Based Covalent Organic Framework Anodes for Lithium-ion Batteries

This work reports a covalent organic framework composite structure (PMDA-NiPc-G), incorporating multiple-active carbonyls and graphene on the basis of the combination of phthalocyanine (NiPc(NH2 )4 ) containing a large π-conjugated system and pyromellitic dianhydride (PMDA) as the anode of lithium-ion batteries. Meanwhile, graphene is used as a dispersion medium to reduce the accumulation of bulk covalent organic frameworks (COFs) to obtain COFs with small-volume and few-layers, shortening the ion migration path and improving the diffusion rate of lithium ions in the two dimensional (2D) grid layered structure. PMDA-NiPc-G showed a lithium-ion diffusion coefficient (DLi + ) of 3.04 × 10-10 cm2 s-1 which is 3.6 times to that of its bulk form (0.84 × 10-10 cm2 s-1 ). Remarkably, this enables a large reversible capacity of 1290 mAh g-1 can be achieved after 300 cycles and almost no capacity fading in the next 300 cycles at 100 mA g-1 . At a high areal capacity loading of ≈3 mAh cm-2 , full batteries assembled with LiNi0.8 Co0.1 Mn0.1 O2 (NCM-811) and LiFePO4 (LFP) cathodes showed 60.2% and 74.7% capacity retention at 1 C for 200 cycles. Astonishingly, the PMDA-NiPc-G/NCM-811 full battery exhibits ≈100% capacity retention after cycling at 0.2 C. Aided by the analysis of kinetic behavior of lithium storage and theoretical calculations, the capacity-enhancing mechanism and lithium storage mechanism of covalent organic frameworks are revealed. This work may lead to more research on designable, multifunctional COFs for electrochemical energy storage.

High Discharge Capacity and Ultra-Fast-Charging Sodium Dual-Ion Battery Based on Insoluble Organic Polymer Anode and Concentrated Electrolyte

Sodium-based dual-ion batteries have shown great promise for large-scale energy storage applications due to their wide operating voltages, environmental friendliness, abundant sodium resources, and low cost, which are widely investigated by researchers. However, the development of high-performance anode materials is a key requirement for the realization of such electrochemical energy storage systems at the practical application level. Carbonaceous anode materials based on intercalation/deintercalation mechanisms typically exhibit low discharge capacities, while metal-based materials based on conversion or alloying reactions show unsatisfactory stability in performance. On the contrary, organic materials display high theoretical capacities due to their flexible molecular structure designability and stable cyclic performance with fast reaction kinetics based on the unique enolization reaction. Herein, we report an organic polymer anode material of polyimide (PNTO), combined with a high-concentration electrolyte; the sodium-based dual-ion battery system constructed exhibits outstanding electrochemical performance. The full battery shows an ultra-high specific discharge capacity of 293.2 mAh g-1 and can be cycled stably for 3200/5600/4100 cycles at ultra-high rates of 60/120/150 C without degradation. Furthermore, the dual-ion battery system demonstrates an extremely low self-discharge rate of 0.03% h-1 and superior fast-charging-slow-discharging performance. It is one of the best performances reported up to now for a dual-ion full battery based on an organic polymer anode. This novel battery system design strategy will facilitate the advancement of high-performance organic-based dual-ion batteries and is expected to be a promising candidate for large-scale energy storage applications.

2,3-Diaminophenazine@carbon felt with chemical grafting via amide bonds as an electrode in lithium-ion batteries

Grafting organic molecules onto an insoluble matrix is an effective way to improve the electronic conductivity and insolubility in electrolyte of organic electrode materials. The active group of CN in DAP@C composites synthesized by chemical grafting of 2,3-diaminophenazine (DAP) with carbon felt through amide bonds (-CO-NH-) displays excellent electrochemical behavior.

Graphene in situ composite metal phthalocyanines (TN-MPc@GN, M = Fe, Co, Ni) with improved performance as anode materials for lithium ion batteries

In view of the disadvantage of the limited active site utilization due to the easy aggregation of phthalocyanine compounds, three kinds of graphene composite metal phthalocyanines (TN-MPc@GN, M = Fe, Co, Ni) were prepared using an in situ composite method, and their electrochemical properties were investigated as anode materials for lithium-ion batteries.