Strain effect in Pd@PdAg twinned nanocrystals towards ethanol oxidation electrocatalysis

Unexpected electro-catalytic activity of the CO reduction reaction on Cr-embedded poly-phthalocyanine realized by strain engineering: a computational study

The electrochemical conversion of carbon monoxide (CO) into value-added products is highly promising for carbon utilization and CO removal. Based on previous theoretical studies, we computationally explored the effect of strain engineering on electrocatalysis of the CO reduction reaction (CORR) by two-dimensional (2D) transition metal embedded polyphthalocyanines (MPPcs). By calculating the adsorption energy of CO and the free energies of key intermediates on the MPPcs under uniaxial and biaxial strains, it was revealed that only CrPPc under biaxial strain has the potential to exhibit significant enhancement of the catalytic performance. The free energy diagrams of the CORR catalyzed by CrPPc were plotted under specific biaxial strains, where both the optimal reaction pathway and rate-determining step are found to be evidently changed. What's more, the 5% compressive strain imposed on CrPPc results in an ultra-low limiting potential (U_L = -0.09 V) with high selectivity on CH₄ as the final product, indicating unexpected electro-catalytic activity. Our study clearly elucidates that moderate strain could greatly enhance the electrocatalytic performance of 2D materials in the CORR.

Tubular palladium-based catalysts enhancing direct ethanol electrooxidation

Direct ethanol fuel cell (DEFC) has the advantages of high power density, high energy conversion efficiency and environmental friendliness, but its commercialization is restricted by factors such as insufficient activity and low anti-poisoning ability of anode catalyst for incomplete oxidation of ethanol. It is of great significance to design and prepare anode catalyst with high activity and high anti-poisoning ability that can be recycled. In this work, tubular palladium-based (Pd-based) catalysts with abundant lattice defect sites were prepared by simple and reproducible electro-displacement reactions using Cu nanowires as sacrificial template. Pd is the main catalytic element which provides adsorption sites for ethanol oxidation. Ag and Cu introduced facilitates the formation of hydroxyl groups to oxidize toxicity intermediates, and changes the d-band center position of Pd, so as to adjust the adsorption and desorption of ethanol and its intermediates on the Pd surface. At the same time, Au introduced with high potential maintains the stability of the catalyst structure. The tubular structure exposes more active sites, improves the atomic utilization rate and enhances the ability of the catalyst resisting dissolution and aggregation. The series of PdAuAgCu tubular catalysts with outer layer dendrites were prepared by electro-displacement reactions using the mixture (ethylene glycol : ultra-pure water = 3 : 1) as the reaction solvent and fivefold twinned Cu nanowires as sacrificial template. The performance evaluation of ethanol electrocatalytic oxidation showed that the Pd₁₇Au₄₀Ag₁₁Cu₃₂ tubular catalysts were prepared at 120 °C and 10 mM CTAB had excellent overall performance, with a peak mass activity of 6335 mA mg_Pd^-1, which was 9.6 times of Pd/C (JM). The residual current density after the stability test of 3000 s was 249 mA mg_Pd^-1, which was 3.3 times of Pd/C (JM).

Pd/Ni-metal-organic framework-derived porous carbon nanosheets for efficient CO oxidation over a wide pH range

Metal nanocrystal ornamented metal-organic frameworks (MOFs) are of particular interest in multidisciplinary applications; however, their electrocatalytic CO oxidation performance over wide pH ranges is not yet reported. Herein, Ni-MOF-derived hierarchical porous carbon nanosheets (Ni-MOF/PC) with abundant Ni-N _x sites decorated with Pd nanocrystals (Pd/Ni-MOF/PC) were synthesized by microwave-irradiation (MW-I) followed by annealing at 900 °C and subsequent etching of Ni-MOF/C prior to Pd deposition. The fabrication mechanism comprises the generation of self-reduced reducing gases from triethylamine during the annealing and selective chemical etching of Ni, thereby facilitating the reduction of Ni-anchored MOF and Pd nanocrystal deposition with the aid of ethylene glycol and MW-I to yield Pd/Ni-N _x enriched MOF/PC. The synthetic strategies endear the Pd/Ni-MOF/PC with unique physicochemical merits: abundant defects, interconnected pores, high electrical conductivity, high surface area, Ni-deficient but more active sites for Pd/Ni-N _x in porous carbon nanosheets, and synergism. These merits endowed the CO oxidation activity and stability on Pd/Ni-MOF/PC substantially than those of Pd/Ni-MOF/C and Pd/C catalysts in wide pH conditions (i.e., KOH, HClO_4, and NaHCO₃). The CO oxidation activity study reveals the utilization of MOF/PC with metal nanocrystals (Pd/Ni) in CO oxidation catalysis.

Tuning the Selective Ethanol Oxidation on Tensile-Trained Pt(110) Surface by Ir Single Atoms

Development of efficient and robust electrocatalysts for complete oxidation of ethanol is critical for the commercialization of direct ethanol fuel cells. However, the complete oxidation of ethanol suffers from poor efficiency due to the low C1 pathway selectivity. Herein, single-atomic Ir (Ir₁ ) on hcp-PtPb/fcc-Pt core-shell hexagonal nanoplates (PtPb@PtIr₁ HNPs) enclosed by Pt(110) surface with a 7.2% tensile strain is constructed to drive complete electro-oxidation of ethanol. Benefiting from the construction of Ir₁ sites, the PtPb@PtIr₁ HNPs exhibit a Faraday efficiency of 57.93% for the C1 pathway, which is ≈8.3 times higher than that of the commercial Pt/C-JM. Furthermore, the PtPb@PtIr₁ HNPs show a top-ranked electro-activity achieving 45.1-fold and 56.3-fold higher than the specific and mass activities of Pt/C-JM, respectively. Meanwhile, the durability can be significantly enhanced by the construction of Ir₁ sites. Density functional theory calculations indicate that the strong synergy on the PtPb@PtIr₁ HNPs surface significantly promotes the breaking of CC bond of CH₂ CO* and facilitates CO oxidation and suppresses the deactivation of the catalyst. This work offers a unique single-atom approach using low-coordination active sites on shape-controlled nanocrystals to tune the selectivity and activity toward complicated catalytic reactions.

Facile synthesis of PdSn alloy octopods through the Stranski–Krastanov growth mechanism as electrocatalysts towards the ethanol oxidation reaction

Pd72Sn28 octopods synthesized through the Stranski–Krastanov growth mode exhibited remarkably enhanced catalytic performance for the EOR relative to commercial Pd/C.