In Situ Fabrication of N-Doped ZnS/ZnO Composition for Enhanced Visible-Light Photocatalytic H2 Evolution Activity

For achieving the goal of peaking carbon dioxide emissions and achieving carbon neutrality, developing hydrogen energy, the green and clean energy, shows a promising perspective for solving the energy and ecological issues. Herein, firstly, we used the hydrothermal method to synthesize the ZnS(en)0.5 as the precursor. Then, ZnS/ZnO composite was obtained by the in situ transformation of ZnS(en)0.5 with heat treatment under air atmosphere. The composition, optical property, morphology, and structural properties of the composite were characterized by X-ray photoemission spectroscopy (XPS), Ultraviolet-visible absorption spectra (Uv-vis Abs), Scanning electron microscopy (SEM) and Transmission electron microscopy image (TEM). Moreover, the content of ZnO in ZnS/ZnO was controlled via adjustment of the calcination times. The visible-light response of ZnS/ZnO originated from the in situ doping of N during the transformation of ZnS(en)0.5 to ZnS/ZnO under heat treatment, which was verified well by XPS. Photocatalytic hydrogen evolution experiments demonstrated that the sample of ZnS/ZnO-0.5 h with 6.9 wt% of ZnO had the best H2 evolution activity (1790 μmol/h/g) under visible light irradiation (λ > 400 nm), about 7.0 and 12.3 times that of the pure ZnS and ZnO, respectively. The enhanced activities of the ZnS/ZnO composites were ascribed to the intimated hetero-interface between components and efficient transfer of photo-generated electrons from ZnS to ZnO.

Ternary photocatalysts based on MOF-derived TiO2 co-decorated with ZnIn2S4 nanosheets and CdS nanoparticles for effective visible light degradation of organic pollutants

A high-efficiency visible-light-responsive CdS/ZnIn2S4/TiO2 photocatalyst was prepared for the first time by the self-sacrificing template method followed by a two-step chemical bath process.

CdS Reinforced with CoSX /NiCo-LDH Core-shell Co-catalyst Demonstrate High Photocatalytic Hydrogen Evolution and Durability in Anhydrous Ethanol

At present, inefficient charge separation of single photocatalyst impedes the development of photocatalytic hydrogen evolution. In this work, the CoS_X /NiCo-LDH core-shell co-catalyst was cleverly designed, which exhibit high activity and high stability of hydrogen evolution in anhydrous ethanol system when coupled with CdS. Under visible light (λ≥420 nm) irradiation, the 3 %Co/NiCo/CdS composite photocatalyst exhibits a surprisingly high photocatalytic hydrogen evolution rate of 20.67 mmol g^-1  h^-1 , which is 59 times than that of the original CdS. Continuous light for 20 h still showed good cycle stability. In addition, the 3 %Co/NiCo/CdS composite catalyst also shows good hydrogen evolution performance under the Na₂ S/Na₂ SO₃ and lactic acid system. The fluorescence (PL), ultraviolet-visible diffuse reflectance (UV-vis) and photoelectrochemical tests show that the coupling of CdS and CoS_X /NiCo-LDH not only accelerates the effective transfer of charges, but also greatly increases the absorption range of CdS to visible light. Therefore, the hydrogen evolution activity of the composite photocatalyst has been significantly improved. This work will provide new insights for the construction of new co-catalysts and the development of composite catalysts for hydrogen evolution in multiple systems.

Fabrication of visible-light response cadmium sulfide modified superhydrophobic surface for water resource remediation

Widespread concern has been attached to the frequent occurrence of pollution by oil slicks and water-soluble pollutants in recent years. The semiconductor photocatalysis is applied to sewage treatment owing to the advantages of energy-conserving and environmental protection. However, its application is limited by the defects of not solving oil slicks and the hard recyclability. In this paper, the high specific surface area and rod-shaped CdS were prepared using template and alkali-treated methods. Next, the alkylated SiO₂and alkali-treated CdS were deposited on pure fabric by physical deposition to prepare the multifunctional superhydrophobic fabric. The specific surface area and morphology of alkali-treated CdS were tested by BET specific surface area test and field emission scanning electron microscope. Besides, oil/water separation, water contact angle, and stability test experiments were performed to determine the superhydrophobic performance. Photocatalysis degradation efficiency and cycle degradation stability of multifunctional fabric were characterized by photocatalysis degradation Rh B experiment. Consequently, the alkali-treated CdS displays a high specific surface up to 343 m²g^-1. The multifunctional fabric presents excellent superhydrophobic performance with the water contact angle up to 155°. Meanwhile, the water contact angle of multifunctional fabric is always over 150° under various circumstances (acid-base corrosion, soaking time at 100 °C and frictional numbers), indicating that the multifunctional fabric has excellent superhydrophobic stability. Moreover, the fabric also exhibits outstanding photocatalysis performance (the degradation efficiency is 94% after 3 cycles). Our work provides a feasible method for addressing oil slicks on water surface and degrading water-soluble pollutants with extensive application prospects in water resource remediation.