Modified stainless steel wires with superwettability for highly efficient in-tube solid-phase microextraction

Construction of different surface wettability is meaningful for the interaction between the sorbent surface and target components. In the current study, four kinds of stainless-steel wires (SSWs) with different hydrophobic/hydrophilic property were prepared and used as the absorbents to enrich the target compounds with different polarity. Comparative extraction of six non-polar polycyclic aromatic hydrocarbons (PAHs) and six polar estrogens was carried out by in-tube solid phase microextraction (IT-SPME). The results showed that two SSWs with the superhydrophobic surfaces exhibited high extraction capacity to the non-polar PAHs with the superior enrichment factor (EF) in the range of 29-672 and 57-744, respectively. In contrast, the superhydrophilic SSWs demonstrated higher enrichment efficiency for the polar estrogens than other hydrophobic SSWs. On the basis of optimized conditions, a validated analysis method was established using six PAHs as model analytes for IT-SPME-HPLC. Acceptable linear ranges (0.5-10 μg L^-1) and low detection limits (0.0056-0.32 μg L^-1) were achieved using the superhydrophobic wire modified by perfluorooctyl trichlorosilane (FOTS). The relative recoveries spiked at 2, 5 and 10 μg L^-1 in the lake water samples were in the range of 81.5%-113.7%. The relative standard deviation (RSD) of intraday (≤0.8%, n = 3) and interday (≤5.3%, n = 3) tests demonstrated the good extraction repeatability for the same extraction tube. Satisfactory repeatability for the preparation of extraction tubes (n = 3) was also obtained with the RSD values in the range of 3.6%-8.0%.

Smart Superhydrophobic Filter Paper for Water/Oil Separation and Unidirectional Transportation of Liquid Droplet

Water/oil separation from their mixture and emulsion has been a prominent topic in fundamental research and in practical applications. In this work, a smart superhydrophobic membrane (SHP) was obtained by dipping an off-the-shelf laboratory filter paper in an ethanol suspension of trichloro (1H,1H,2H,2H-tridecafluoro-n-octyl) silane, tetraethyl orthosilicate, and titanium dioxide nanoparticles with different dimensions of 20 and 100 nm. The selection of membrane substrates was optimized including different quantitative and quantitative filter papers with different filtration velocity (slow, intermediate, and fast). The as-prepared SHP was demonstrated to be superhydrophobic and photosensitive, which was used in the separation of carbon tetrachloride and water from their mixture and emulsion. Moreover, orderly aligned micropores were formed for the modified superhydrophobic filter papers by using nanosecond laser. Unidirectional penetration was obtained for the UV-irradiated paper with a bored pore in the range of 50-500 μm in the systems of air/water and water/oil. This study may promote the understanding of unidirectional transportation of liquid droplet and facilitate the design of interfacial materials with Janus-type wettability.

Robust Super-Amphiphobic Titanium Surface for Liquid/Liquid Mini Separations

Super-amphiphobic surface with low robustness is not suitable for practical application due to its weak mechanical strength. In this work, an in-site growth of micro-/nanoscale flower-like TiO2 on the surface of a titanium mesh was successfully fabricated through hydrothermal synthesis, followed by chemical modification with low-surface-energy heptadecafluoro-1,1,2,2-tetrahydrodecyl trichlorosilane. The resultant super-amphiphobic coating was highly repellent to all of the ethanol–water mixtures with surface tensions ranging over 26.0–72.8 mN/m, as well as excellent chemical and mechanical durability. After it was irradiated for 8 h with ultraviolet light, it was used for oil/water and oil/oil mini-separation with the help of its Janus characteristic. This was attributed to its unidirectional penetration for liquid droplets with different surface tension values. This kind of smart super-amphiphobic mesh with photochemical activity could potentially gate and sort liquids via surface tensions.