Separator-free Zn-ion Battery with Mn:V3O7·H2O Nanobelts and a Zn2+-Polyacrylamide Semisolid Electrolyte with Ultralong Cycle Life

Vanadium based oxides are immensely suitable for zinc-ion-batteries (ZIBs) due to their layered and stable crystal structures. In this study, Mn doped V₃O₇·H₂O nanobelts were synthesized and used as cathodes in ZIBs for the very first time and the doped oxide exhibited an enhanced capacity of 258 mAh g^-1 compared to its undoped counterpart (208 mAh g^-1) at the same current density of 40 mA g^-1. Mn:V₃O₇·H₂O outperforms the V₃O₇·H₂O due to the superior bulk electrical conductivity as well as higher nanoscale current carrying capability imparted by a high proportion of mixed valent states of Mn³⁺, Mn²⁺, V⁵⁺, and V⁴⁺ and the smaller crystallite size that affords short diffusion lengths for Zn²⁺ ions. The Mn:V₃O₇·H₂O cathode is coupled with a Zn²⁺ ion conducting polyacrylamide gel electrolyte and a Zn flakes/activated carbon (Zn Fs/C) composite anode to yield a unique separator free Mn:V₃O₇·H₂O/Zn²⁺-PAM gel/Zn-Fs/C battery. The cell exhibits a capacity of ∼205 mAh g^-1 (at 40 mA g^-1) and retains 99% of its original capacity after 3500 cycles. The Zn²⁺-PAM gel shows a high ionic conductivity in the range of 5.9 to 28.2 S cm^-1, over a wide temperature span of 0 to 70 °C, and a wide electrochemical potential stability window of -0.5 to +2.3 V, thus rendering it suitable for low temperature applications as well. The gel also inhibits dendritic growth of Zn over the Zn-Fs/C anode through regulated flow of Zn²⁺ ions during charging, prevents cathode dissolution, and improves cycle life via preservation of structural integrity of the Mn:V₃O₇·H₂O cathode after 200 charge-discharge cycles. This is a highly scalable cell configuration and opens up opportunities to produce long lasting batteries completely free of costly separators with a semisolid free-standing electrolyte and a robust doped oxide.

Photoelectrochemical sensing of glutathione using bismuth vanadate (BiVO4) decorated with polyaniline (PANI) and cadmium sulfide (CdS)

A ternary nanocomposite photoelectrode composed of cadmium sulfide (CdS), polyaniline (PANI), and bismuth vanadate (BiVO₄) was successfully designed by combining cyclic voltammetry (CV) with electrochemical deposition and high-temperature calcination. The first synthesized CdS/PANI/BiVO₄ composite was used as a photoelectrochemical (PEC) monitoring platform for glutathione (GSH). The ternary CdS/PANI/BiVO₄ nanocomposites exhibited higher PEC activity, which was attributed to the accelerated electron transfer by the loading of CdS and PANI, which enables the material surface to better adsorb the electrons separated by GSH, thereby oxidizing it into GSSH. The photoanodes were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectroscopy, and photoelectrochemical experiments. Under the optimal experimental conditions, the BiVO₄ electrode modified with CdS and PANI exhibited a linear response in the concentration range of 0.1-20 μM with a sensitivity of 0.669 μA mM^-1 cm^-2 and a detection limit of 40 nM. Moreover, the PEC sensor exhibits good reproducibility and long-term stability. In summary, the designed materials have excellent electrochemical properties, which make them ideal candidates for PEC detection of GSH.

A Visible-Light-Active CuS/MoS2/Bi2WO6 Aptamer Sensitively Detects the Non-Steroidal Anti-Inflammatory Drug Diclofenac

Diclofenac is a non-steroidal, anti-inflammatory drug and is clinically used for the treatment of osteoarthritis, non-articular rheumatism, etc. This research aimed to demonstrate the creation of an upgraded photoelectrochemical (PEC) aptamer sensor for detecting diclofenac (DCF) with high sensitivity. In this work, photoactive materials and bio-identification components served as visible-light-active CuS/MoS₂/Bi₂WO₆ heterostructures and aptamers, respectively. CuS and MoS₂/Bi₂WO₆ were combined to improve photocurrent responsiveness, which helped the structure of PEC aptasensors. Additionally, the one-pot synthesis of CuS/MoS₂/Bi₂WO₆ was ecologically beneficial. With these optimizations, the photocurrent response of aptamer/CS/CuS/MoS₂/Bi₂WO₆ exhibited linearity between 0.1 and 500 nM DCF. The detection limit was 0.03 nM (S/N = 3). These results suggest that the PEC sensing technique might produce an ultra-sensitive sensor with high selectivity and stability for DCF detection.

Comparative study of BiVO4 and BiVO4/Ag2O regarding their properties and photocatalytic degradation mechanism

Schematic diagram of the photocatalytic mechanism under visible light.