Anderson-type polyoxometalates: from structures to functions

Study of methylene blue removal and photocatalytic degradation on zirconia thin films modified with Mn-Anderson polyoxometalates

Recalcitrant pollutants are challenging to degrade during water treatment processes. Methylene blue (MB), a cationic dye, is particularly resistant to degradation and is environmentally persistent. Heterogeneous photocatalysis has emerged as a suitable strategy for removing such pollutants from water. In this work, ZrO2 thin films were modified with Anderson-type Mn-polyoxometalate (MnPOM) ((NH4)3[MnMo6O24H6]), and the efficiency of MB removal from water was studied. ZrO2 was synthesized by a sol-gel method, with thin films deposited using the doctor blade method, and ZrO2 thin films were modified using chemisorption method. The synthesized materials were characterized using SEM, EDX, UV-Vis diffuse reflectance spectroscopy and FTIR. The adsorption kinetics and isotherms for MB were studied for both bare ZrO2 and ZrO2/MnPOM composites. Optical characterization showed a band gap energy of 4.02 eV for bare ZrO2, while the ZrO2/MnPOM composite exhibited a band gap of 3.7 eV. Furthermore, ZrO2 showed lower MB removal capacity (∼8%) than ZrO2/MnPOM thin films (∼29%). The isothermal adsorption studies indicated that MB adsorption onto both bare ZrO2 and ZrO2/MnPOM followed the Langmuir adsorption model (qm = 20.6 mg g-1 for ZrO2 and qm = 62.9 mg g-1 for ZrO2/MnPOM). Furthermore, the adsorption kinetics of MB were well described by a pseudo-second-order model. Photocatalytic testing under UV irradiation showed an apparent rate constant (kap) of 2 × 10-3 min-1 for bare ZrO2 and a value of kap 5.4 × 10-3 min-1 for ZrO2/MnPOM after 100 minutes. TD-DFT calculations revealed an LMCT interaction between the ZrO2 nanoparticle and the MnPOM, which likely contributes to the enhanced photocatalytic activity of the ZrO2/MnPOM composite.

A Palladium-Containing Polyoxotungstate with Anisotropic Proton Conductivity

Here, a case of bilayer heterojunction Pd-containing polyoxotungstate (POW), connecting a Te3Pd3 ring and an Anderson-like TeW6 cluster, has been synthesized. The Anderson-like cluster is the first example in POW. The coordination of Pd in the ring with the S atom on the sulfo group breaks the traditional coordination configuration of Pd and O in polyoxometalates (POMs), enriching the structural types of Pd-containing POMs. In addition, the hybrid bilayer heterojunction structure at the molecular level not only provides high thermal stability but also results in spatial arrangement anisotropy, leading to up to five times the anisotropic proton conductivity.

Anderson-type polyoxometalates for catalytic applications

Anderson-type polyoxometalates have exhibited remarkable catalytic capabilities in a wide range of reactions. This discourse delves into the distinct categories of Anderson POMs and their respective catalytic reactions, which are examined in separate segments. These encompass the straightforward {XMo6} POMs, the organic grafting {XMo6} POMs, and the integration of POMs into POM cluster organic frameworks. It is important to highlight that specific catalytic functionalities can solely be accomplished via the utilization of Anderson-type POMs, thus emphasizing their indispensable role in future explorations.

Combination of covalent organic frameworks (COFs) and polyoxometalates (POMs): the preparation strategy and potential application of COF-POM hybrids

Both covalent organic frameworks (COFs) and polyoxometalates (POMs) show excellent properties and application potential in many fields, thus receiving widespread attention. In recent years, COF-POM hybrid materials were prepared by combining COFs and POMs through physical or chemical methods. COF-POM hybrids have shown high performance in many fields, such as catalysis, sensing, energy storage, and biomedicine. In this review, we introduced the preparation strategy and application of COF-POM hybrids in detail. We believe that the combination of COFs and POMs will provide more abundant functions and broad application prospects.

Adsorption and Photocatalytic Degradation of Methylene Blue on TiO2 Thin Films Impregnated with Anderson-Evans Al-Polyoxometalates: Experimental and DFT Study

In this work, we fabricated a TiO2 thin film, and the same film was modified with an Anderson aluminum polyoxometalate (TiO2-AlPOM). Physical-chemical characterization of the catalysts showed a significant change in morphological and optical properties of the TiO2 thin films after surface modification. We applied the kinetic and isothermal models to the methylene blue (MB) adsorption process on both catalysts. The pseudo-second order model was the best fitting model for the kinetic results; qe (mg/g) was 11.9 for TiO2 thin films and 14.6 for TiO2-AlPOM thin films, and k2 (g mg-1 min-1) was 16.3 × 10-2 for TiO2 thin films and 28.2 × 10-2 for TiO2-AlPOM thin films. Furthermore, the Freundlich model was suitable to describe the isothermal behavior of TiO2, KF (5.42 mg/g), and 1/n (0.312). The kinetics of photocatalytic degradation was fitted using the Langmuir-Hinshelwood model; kap was 7 × 10-4 min-1 for TiO2 and 13 × 10-4 min-1 for TiO2-AlPOM. The comparative study showed that TiO2 thin films reach a 19.6% MB degradation under UV irradiation and 9.1% MB adsorption, while the TiO2-AlPOM thin films reach a 32.6% MB degradation and 12.2% MB adsorption on their surface. The surface modification improves the morphological, optical, and photocatalytic properties of the thin films. Finally, the DFT study supports all the previously shown results.

Synthesis and characterization of Anderson-Evans type polyoxometalates, antibacterial properties

In the present work, the new aluminium-substituted polyoxometalates of the Anderson-Evans type have been prepared and structurally defined by the reaction of aluminium (III) chloride hexahydrate and sodium tungstate dihydrate/sodium molybdate dihydrate in an aqueous basic medium. Elemental analysis, FT-IR, TGA, 1H NMR, and 31P NMR analysis revealed that these polyoxometalates had the following formula: [Ph4P]3[Al(OH)6Mo6O18]·4H2O 1, [Ph4P]3[Al(OH)6W6O18]·4H2O 2, [C7H10N]3[Al(OH)6Mo6O18]·4H2O 3, [C7H10N]3[Al(OH)6W6O18]·4H2O 4. The compounds 1 and 2 show promising antibacterial activity against gram-positive Staphylcoccus aureus ATCC 25923 and gram-negative Escherichia coli ATCC 25922 bacteria.

Polyoxometalate-based frameworks for photocatalysis and photothermal catalysis

Polyoxometalate-based frameworks (POM-based frameworks) are extended structures assembled from metal-oxide cluster units and organic frameworks that simultaneously possess the virtues of POMs and frameworks. They have been attracting immense attention because of their diverse architectures and charming topologies and also due to their probable application prospects in the areas of catalysis, separation, and energy storage. In this review, the recent progress in POM-based frameworks including POM-based metal organic frameworks (PMOFs), POM-based covalent organic frameworks (PCOFs), and POM-based supramolecular frameworks (PSFs) is systematically summarized. The design and construction of a POM-based framework and its application in photocatalysis and photothermal catalysis are introduced, respectively. Finally, our brief outlooks on the current challenges and future development of POM-based frameworks for photocatalysis and photothermal catalysis are provided.

Ionic γ-FeO(OH) Nanocrystal Stabilized by Small Isopolymolybdate Clusters as Reactive Core for Water Oxidation

At near neutral to basic pH, hydrolysis-induced aggregation to insoluble bulk iron-oxide is often regarded as the pitfalls of molecular iron clusters. Iron-oxide nanocrystals are encouragingly active over the molecular clusters and/or bulk oxides albeit, stabilizing such nanostructures in aqueous pH and under turnover condition remain a perdurable challenge. Herein, an Anderson-type [Mo₇ O₂₄ ]^6- isopolyanion, a small (dimension ca. 0.85 nm) isolable polyoxometalate (POM) possessing only {31} atoms, has been introduced for the first time as a covalent linker to stabilize an infinitely stable and aqueous-soluble γ-FeO(OH) nanocore. During the hydrothermal isolation of the material, a partial dissociation of the parent [Mo₇ O₂₄ ]^6- may lead to the in situ generation of few analogous [Mo_x O_y ]^n- clusters, proved by Raman study, which can also participate in stabilizing the γ-FeO(OH) nanocore, Mo_x O_y @FeO(OH). However, due to high ionic charge on {Mo=O} terminals of the [Mo_x O_y ]^n- , they are covalently linked via Mo^VI -μ₂ O-Fe^III bridging to γ-FeO(OH) core in Mo_x O_y @FeO(OH), established by numerous spectroscopic and microscopic evidence. Such bonding mode is more likely as precedent from the coordination motif documented in the transition metal clusters stabilized by this POM. The γ-FeO(OH) nanocore of Mo_x O_y @FeO(OH) behaves as potent active center for electrochemical water oxidation with a overpotential, 263 mV @ 10 mA cm^-2 , lower than that observed for bare γ-FeO(OH). Despite of some molybdenum dissolution from the POM ligands to the electrolyte, residual anionic POM fragments covalently bound to the OER active γ-FeO(OH) core of the Mo_x O_y @FeO(OH) makes the surface predominantly ionic that results in an ordered electrical double layer to promote a better charge transport across the electrode-electrolyte junction, less likely in bulk γ-FeO(OH).

Facile synthesis of polyoxometalate supported on magnetic graphene oxide as a hybrid catalyst for efficient oxidation of aldehydes

In the present study, Anderson-type polyoxometalate [N(C₄H₉)₄] [FeMo₆O₁₈(OH)₆] (FeMo₆) was immobilized on amino-modified magnetic graphene oxide and employed as a new hybrid catalyst in oxidation of aldehydes to carboxylic acids. The synthesized hybrid catalyst Fe₃O₄/GO/[FeMo₆] was characterized using thermogravimetric analysis (TGA), scanning electron microscopies (SEM), Fourier transform infrared (FT-IR), vibrating sample magnetometry (VSM), energy-dispersive X-ray analysis (EDX), Raman spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-OES). The results indicated that our catalyst was quite active in oxidizing the aldehydes to their corresponding carboxylic acids in the presence of hydrogen peroxide. The synthesized catalyst can be easily separated from the reaction medium and reused for six consecutive runs without a significant reduction in reaction efficiency.

Cations Modulated Assembly of Triol-Ligand Modified Cu-Centered Anderson-Evans Polyanions

Counter-cations are essential components of polyoxometalates (POMs), which have a distinct influence on the solubility, stabilization, self-assembly, and functionality of POMs. To investigate the roles of cations in the packing of POMs, as a systematic investigation, herein, a series of triol-ligand covalently modified Cu-centered Anderson-Evans POMs with different counter ions were prepared in an aqueous solution and characterized by various techniques including single-crystal X-ray diffraction. Using the strategy of controlling Mo sources, in the presence of triol ligand, NH₄⁺, Cu²⁺ and Na⁺ were introduced successfully into POMs. When (NH₄)₆Mo₇O₂₄ was selected, the counter cations of the produced POMs were ammonium ions, which resulted in the existence of clusters in the discrete state. Additionally, with the modulation of the pH of the solutions, the modified sites of triol ligands on the cluster can be controlled to form δ- or χ-isomers. By applying MoO₃ in the same reaction, Cu²⁺ ions served as linkers to connect triol-ligand modified polyanions into chains. When Na₄Mo₈O₂₆ was employed as the Mo source to react with triol ligands in the presence of CuCl₂, two 2-D networks were obtained with {Na₄(H₂O)₁₄} or {{Na₂(H₂O)₄} sub-clusters as linkers, where the building blocks were δ/δ- and χ/χ-isomers, respectively. The present investigation reveals that the charges, sizes and coordination manners of the counter cations have an obvious influence on the assembled structure of polyanions.

Insights into organic-inorganic hybrid molecular materials: organoimido functionalized polyoxomolybdates

Polyoxometalates (POMs) are polyatomic anions that comprise transition metal group 5 (V, Nb, Ta) or group 6 (Mo, W) oxyanions connected together by shared oxygen atoms. POMs are fascinating because of their exclusive and remarkable characteristics. One of the most interesting features of POMs is their capability to function as an electron relay by performing stepwise multi-electron redox reactions while maintaining their structural integrity. Functionalization of POMs with amino organic compounds results in organoimido derivatives of polyoxometalates, which have aroused interest due to augmentation of their properties. Comprehensive study has shown that the synthesis methodologies to obtain desired organoimido derivatives of POMs by employing various imido-releasing reagents have progressed drastically in recent decades, particularly the innovative DCC-dehydrating technique. These organoimido functionalized POMs have been used as major building blocks to develop unique nanostructured organic-inorganic hybrid molecular materials. Many conventional organic synthesis processes such as Pd-catalyzed carbon-carbon coupling and esterification reactions have been performed with organoimido functionalized POMs where the presence of POM triggered the reaction process. Thus, investigation of the reactivity of organoimido derivatives of POMs foreshadows the intriguing future of POMs chemistry.

Four Anderson-type [TeMo6O24]6−-based metal–organic complexes with a new bis(pyrimidine)-bis(amide): multifunctional electrochemical and adsorption performances

Four isostructural Anderson-type POM-based metal–organic complexes derived from a new bis(pyrimidine)-bis(amide) ligand were synthesized, showing multifunctional electrochemical sensing activities and good adsorption performances for organic dyes.

A 3D C@TiO2 multishell nanoframe for simultaneous photothermal catalytic hydrogen generation and organic pollutant degradation

Rapid heat loss and fast charge carrier recombination constitute two crucial issues that hinder the development of efficient solar energy utilization and conversion over the semiconductor in a photothermal catalytic system. Inspired by energy production from waste water, we designed an advanced 3D C@TiO₂ multishell nanoframe (MNF) photocatalyst. Its unique structural features of heat confinement and vibrant photocarrier kinetics lead to excellent photo-thermal conversion for synchronous superior photocatalytic H₂ evolution (503 μmol g^-1h^-1) and 98.2% RhB removal without the use of any co-catalyst and sacrificial reagent under simulated sunlight irradiation (AM 1.5G). Mechanism exploration reveals that the difference between the inner and outer gas pressure formed inside C@TiO₂ precursor facilitates the selective cleavage of outer TiO₂ layers at selected temperatures during calcination. Synergistic effects between residual carbon core and multi-shelled TiO₂ framework endow C@TiO₂ MNF with excellent heat confinement and vibrant photocarrier kinetics. Such MNF photo-thermocatalyst concept provides a novel strategy for effective utilization of solar energy, and this work may open a novel avenue towards advanced nanostructures for efficient waste-to-energy conversion.