A strategy for preparing high-efficiency and economical catalytic electrodes toward overall water splitting

Active site engineering of intermetallic nanoparticles by the vapour-solid synthesis: carbon black supported nickel tellurides for hydrogen evolution

The development and design of catalysts have become a major pillar of latest research efforts to make sustainable forms of energy generation accessible. The production of green hydrogen by electrocatalytic water splitting is dealt as one of the most promising ways to enable decarbonization. To make the hydrogen evolution reaction through electrocatalytic water splitting usable on a large scale, the development of highly-active catalysts with long-term stability and simple producibility is required. Recently, nickel tellurides were found to be an interesting alternative to noble-metal materials. Previous publications dealt with individual nickel telluride species of certain compositions due to the lack of broadly applicable synthesis strategies. For the first time, in this work the preparation of carbon black supported nickel telluride nanoparticles and their catalytic performance for the electrocatalytic hydrogen evolution reaction in alkaline media is presented. The facile vapour-solid synthesis strategy enabled remarkable control over the crystal structure and composition, demonstrating interesting opportunities of active site engineering. Both single- and multi-phase samples containing the Ni-Te compounds Ni3Te2, NiTe, NiTe2-x & NiTe2 were prepared. Onset potentials and overpotentials of -0.145 V vs. RHE and 315 mV at 10 mA cm-2 respectively were achieved. Furthermore, it was found that the mass activity was dependent on the structure and composition of the nickel tellurides following the particular order: Ni3Te2 > NiTe > NiTe2-x > NiTe2.

Single-Atom Doped Fullerene (MN4-C54) as Bifunctional Catalysts for the Oxygen Reduction and Oxygen Evolution Reactions

Development of high-performance oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts is crucial to realizing the electrolytic water cycle. C60 is an ideal substrate material for single atom catalysts (SACs) due to its unique electron-withdrawing properties and spherical structure. In this work, we screened for a novel single-atom catalyst based on C60, which anchored transition metal atoms in the C60 molecule by coordination with N atoms. Through first-principles calculations, we evaluated the stability and activity of MN4-C54 (M = Fe, Co, Ni, Cu, Rh, Ru, Pd, Ag, Pt, Ir, Au). The results indicate that CuN4-C54, which is based only on earth-abundant elements, exhibited low overpotentials of 0.46 and 0.47 V for the OER and ORR, respectively, and was considered a promising bifunctional catalyst, showing better performance than the noble-metal ones. In addition, according to the linear relationship of intermediates, we established volcano plots to describe the activity trends of the OER and ORR on MN4-C54. Finally, d-band center and crystal orbital Hamiltonian populations methods were used to explain the catalytic origin. Suitable d-band centers lead to moderate adsorption strength, further leading to good catalytic performances.

In situ evolution of bulk-active γ-CoOOH with immobilized Gd dopants enabling efficient oxygen evolution electrocatalysis

Promoting the in situ reconstruction of transition metal (TM)-based precatalysts into low-crystalline and well-modified TM (oxy)hydroxides (TMOxHy) during the alkaline oxygen evolution reaction (OER) is crucial for enhancing their catalytic performances. In this study, we incorporated gadolinium (Gd) into a cobalt hydroxide precatalyst, achieving a deep reconstruction into cobalt oxyhydroxide (γ-CoOOH) while retaining the incorporated Gd during the activation process of the alkaline OER. The unconventional non-leaching Gd dopants endow γ-CoOOH with reduced crystallinity, increasing the exposure of electrolyte-accessible Co atoms and enhancing its bulk activity. Furthermore, the modulation of the electronic structure of γ-CoOOH substantially boosts the intrinsic activity of the active Co sites. As a result, when supported on nickel foam, the catalyst exhibits remarkable alkaline OER performance, achieving a current density of 100 mA cm-2 at a low overpotential of approximately 327 mV. Notably, an ultrahigh current density of 1000 mA cm-2 is robustly maintained for 5 days, highlighting its immense potential for practical applications in large-scale hydrogen production.

CoPS/Co4S3 Heterojunction with Highly Exposed Active Sites and Dual-site Synergy for Effective Hydrogen Evolution Reactions

Cobalt phosphosulphide (CoPS) has recently been recognized as a potentially effective electrocatalyst for the hydrogen evolution reaction (HER). However, there have been no research on the design of CoPS-based heterojunctions to boost their HER performance. Herein, CoPS/Co4S3 heterojunction was prepared by phosphating treatment based on defect-rich flower-like Co1-xS precursors. The high specific surface area of nanopetals, together with the heterojunction structure with inhomogeneous strain, exposes more active sites in the catalyst. The electronic structure of the catalyst is reconfigured as a result of the interfacial interactions, which promote the catalyst's ability to adsorb hydrogen and conduct electricity. The synergistic effect of the Co and S dual-site further enhance the catalytic activity. The catalyst has overpotentials of 61 and 70 mV to attain a current density of 10 mA cm-2 in acidic and alkaline media, respectively, which renders it competitive with previously reported analogous catalysts. This work proposes an effective technique for constructing transition metal phosphosulfide heterojunctions, as well as the development of an efficient HER electrocatalyst.

Robust High-performance Bifunctional Porous Cobalt MOF-Based Catalysts for Overall Water Splitting

MOF-based materials, as bifunctional catalysts for electrocatalytic water splitting, play an important role in the application and development of clean fuel hydrogen energy. This study presents a series of novel 3D Co-based MOFs with layered networks, including [Co(4,4'-bipy)0.5(aip)(CH3OH)·H2O]n (Co-MOF 1), [Co2(1,3'-bit)(aip)2(CH3OH)·H2O]n (Co-MOF 2), [Co(4,4'-bipb)(aip)]n (Co-MOF 3), and [Co2(4,4'-bipe)(aip)2·1.5H2O]n (Co-MOF 4). Their single-crystal structures of Co-MOFs 1-4 are characterized and analyzed before being applied in alkaline solutions for water decomposition (OER and HER). The electrocatalytic tests indicate that Co-MOFs 1-4 exhibit a good performance. Notably, Co-MOF 4 exhibits great behavior which has low overpotentials of 94 and 188 mV (OER) as well as 185 and 352 mV (HER) at the currents of 10 and 100 mA cm-2, respectively. In comparison with Co-MOFs 1-3, Co-MOF 4 has the lowest Tafel slopes, highest ECSA, and smallest resistance. The immanent qualities, such as distinct interwoven long chain layered structure, unsaturated coordination modes, and synergistic catalytic qualities among Co ions, contribute to explaining the results. The fundamentals provide valuable information for the investigation of innovative MOF-based bifunctional electrocatalysts for overall water splitting.

A first-principles prediction of the structural, electronic, transport and photocatalytic properties of GaGeX3 (X = S, Se, Te) monolayers

The discovery of new 2D materials with superior properties motivates scientists to make breakthroughs in various applications. In this study, using calculations based on density functional theory (DFT), we have comprehensively investigated the geometrical characteristics and stability of GaGeX3 monolayers (X = S, Se, or Te), determining their electronic and transport properties, and some essential optical and photocatalytic properties. AIMD simulations show that these materials are highly structurally and thermodynamically stable. Notably, the GaGeSe3 monolayer is a semiconductor with a band gap of 1.9 eV and has a high photon absorption coefficient of up to 1.1 × 105 cm-1 in the visible region. The calculated solar-to-hydrogen conversion efficiency of the GaGeSe3 monolayer is 11.33%, which is relatively high compared to some published 2D materials. Furthermore, the electronic conductivity of the GaGeSe3 monolayer is 790.65 cm2 V-1 s-1. Our findings suggest that the GaGeSe3 monolayer is a new promising catalyst for the solar water-splitting reaction to give hydrogen and a potential new 2D material for electrical devices with high electron mobility.

Perovskite Oxides: Syntheses and Perspectives on Their Application for Nitrate Reduction

Over the decades, the rise in nitrate levels in the ecosystem has posed a serious threat to the continuous existence of humans, fauna, and flora. The deleterious effects of increasing levels of nitrates in the ecosystem have led to adverse health and environmental implications in the form of methemoglobinemia and eutrophication, respectively. Different pathways/routes for the syntheses of perovskites and their oxides were presented in this review. In recent times, electrocatalytic reduction has emerged as the most utilized technique for the conversion of nitrates into ammonia, an industrial feedstock. According to published papers, the efficiency of various perovskites and their oxides used for the electrocatalytic reduction of nitrate achieved a high Faradaic efficiency of 98%. Furthermore, studies published have shown that there is a need to improve the chemical stability of perovskites and their oxides during scale-up applications, as well as their scalability for industrial applications.

An IrRuOx catalyst supported by oxygen-vacant Ta oxide for the oxygen evolution reaction and proton exchange membrane water electrolysis

The sustainable development of proton exchange membrane water electrolysis (PEMWE) requires a dramatic reduction in Ir while maintaining good catalytic activity and stability for the oxygen evolution reaction (OER). Herein, high-surface-area Ta2O5 with abundant oxygen vacancies is synthesized via a facile process, followed by anchoring IrRuOx onto a Ta2O5 support (IrRuOx/Ta2O5). IrRuOx and Ta2O5 work synergistically to afford excellent catalytic performance for the acidic OER. At 0.3 mgIr cm-2, IrRuOx/Ta2O5 only needed an overpotential of 235 mV to deliver 10 mA cm-2 in an acidic half cell and needed a cell potential of 1.91 V to deliver 2 A cm-2 in a PEM water electrolyzer. The characterization results show that doping Ir into RuOx significantly improves the stability and the electrochemically active surface area of RuOx. In IrRuOx/Ta2O5, IrRuOx interacts with Ta2O5 through more electron-rich Ir, indicating strong synergy between the catalyst and the support. The use of a metal oxide support improves the catalyst dispersion, optimizes electronic structures, facilitates mass transport, and stabilizes active sites. This work demonstrates that compositing Ir with less expensive Ru and anchoring catalyst nanoparticles on platinum-group metal (PGM)-free metal oxide supports represents one of the most promising strategies to reduce Ir loading and achieve an activity-stability trade-off. Such a strategy can benefit future catalyst design for other energy storage and conventional processes.

Corrosion resistance and earth-abundance FeS-based heterojunction catalyst for seawater splitting at industrial grade density

The strategic progression toward highly efficient transition metal electrocatalytic electrodes is crucial to achieving efficiency and long-term stability in hydrogen production from authentic seawater sources. This work reports the development of a self-supporting, heterogeneous and corrosion-resistant iron sulfur-based catalytic electrode via a streamlined, one-step process involving sulfide etching and electroless plating on an iron foam substrate (IF). This new electrode, named NiS-FeS@IF, involves a nanostructured NiS-FeS catalytic material that combines in situ, resulting in a thin, ultrathin nanospherical layer on the IF. This construction has low overpotentials of merely 322 mV for the hydrogen evolution reaction (HER) and 563 mV for the oxygen evolution reaction (OER) with a current density of 500 mA cm-2 in alkaline simulated seawater electrolytes. Importantly, the NiS-FeS@IF electrode enduring more than 500 h at an industrial grade high current density of 1 A cm-2 without noteworthy performance deterioration. The unique and uniformly dispersed morphology of NiS-FeS facilitates intensified interfacial electron transfer, optimizes active site exposure and provides efficient channels for the rapid release and mass transfer of gas bubbles. This work introduces a novel approach for the facile preparation of efficient electrode materials.

(FeMnCe)-co-doped MOF-74 with significantly improved performance for overall water splitting

Developing inexpensive electrocatalysts with high activity and stability is of great value for overall water splitting. In this work, we designed a series of 3d-4f (FeMnCe)-trimetallic MOF-74 with different ratios of 3d- and 4f-metal centers. Among them, FeMn6Ce0.5-MOF-74/NF exhibited the best electrocatalytic performance for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline solution. It only requires a low overpotential of 281 mV@100 mA cm-2 for OER and 186 mV@-10 mA cm-2 for HER in 1 M KOH. With FeMn6Ce0.5-MOF-74/NF as the anode and cathode in the overall water splitting system, only 1.65 V is needed to deliver a current density of 10 mA cm-2. In particular, for the as-fabricated FeMn6Ce0.5-MOF-74/NF||Pt/C cell unit, only 1.40 V is needed to achieve 10 mA cm-2. Therefore, the successful design of 3d-4f mixed-metallic MOF-74 provides a new viewpoint to develop highly efficient non-precious metal electrocatalysts.

Rhenium-Based Electrocatalysts for Water Splitting

Due to the contamination and global warming problems, it is necessary to search for alternative environmentally friendly energy sources. In this area, hydrogen is a promising alternative. Hydrogen is even more promising, when it is obtained through water electrolysis operated with renewable energy sources. Among the possible devices to perform electrolysis, proton exchange membrane (PEM) electrolyzers appear as the most promising commercial systems for hydrogen production in the coming years. However, their massification is affected by the noble metals used as electrocatalysts in their electrodes, with high commercial value: Pt at the cathode where the hydrogen evolution reaction occurs (HER) and Ru/Ir at the anode where the oxygen evolution reaction (OER) happens. Therefore, to take full advantage of the PEM technology for green H2 production and build up a mature PEM market, it is imperative to search for more abundant, cheaper, and stable catalysts, reaching the highest possible activities at the lowest overpotential with the longest stability under the harsh acidic conditions of a PEM. In the search for new electrocatalysts and considering the predictions of a Trasatti volcano plot, rhenium appears to be a promising candidate for HER in acidic media. At the same time, recent studies provide evidence of its potential as an OER catalyst. However, some of these reports have focused on chemical and photochemical water splitting and have not always considered acidic media. This review summarizes rhenium-based electrocatalysts for water splitting under acidic conditions: i.e., potential candidates as cathode materials. In the various sections, we review the mechanism concepts of electrocatalysis, evaluation methods, and the different rhenium-based materials applied for the HER in acidic media. As rhenium is less common for the OER, we included a section about its use in chemical and photochemical water oxidation and as an electrocatalyst under basic conditions. Finally, concluding remarks and perspectives are given about rhenium for water splitting.

Quantum dot-doped CeOx-NiB with modulated electron density as a highly efficient bifunctional electrocatalyst for water splitting

Development of economical, efficient and durable non-noble metal electrocatalysts for the hydrogen/oxygen evolution reaction (HER/OER) holds great promise, but still faces great challenges. Herein, a strategy of doping metal borides with rare earth metal oxides and introducing silicon carbide (SiC) quantum dots has been explored to develop efficient bifunctional electrocatalysts. A novel electrocatalyst consists of SiC quantum dot-decorated CeO_x-NiB supported on nickel foam via a one-step mild electroless plating reaction (denoted as CeO_x-NiB/SiC@NF). Notably, the modulated electron density of the CeO_x-NiB/SiC@NF electrode significantly boosts the electrochemically active surface area and electron transfer, and optimizes the hydrogen/water absorption free energy, which delivers current densities of 50 mA cm^-2 and 10 mA cm^-2 at overpotentials of only 131 mV and 234 mV for the HER and the OER, respectively. The target electrode requires only 1.43 V to provide 10 mA cm^-2 for overall water splitting in 1.0 M KOH. Moreover, the electrode also exhibits good stability and durability at the industrial-grade current density (0.5-1 A cm^-2). This work provides a new idea for the development of efficient and durable non-precious metal catalysts.

In Situ Activation Endows Orthorhombic Fluorite-Type Samarium Iridium Oxide with Enhanced Acidic Water Oxidation

Developing electrochemical catalysts for acidic water oxidation with improved activity and stability has been the key to the further popularization of proton exchange membrane electrolyzers. In this work, an orthorhombic fluorite-type samarium iridium oxide (Sm3IrO7) catalyst is synthesized by a simple solid-state reaction. After in situ activation, the as-prepared Sm3IrO7 exhibits higher mass activity and durability than that of commercial IrO2. The in-depth analyses indicate the formation of amorphous IrOx species on the surface to evolve to a new heterostructure IrOx/Sm3IrO7, along with Sm leaching during the in situ activation process. More importantly, strong electronic interactions exist between newborn IrOx species and remaining Sm3IrO7, leading to the compressed Ir-O bonds in IrOx compared to commercial IrO2, thus reducing the energy barrier for oxygen evolution reaction (OER) intermediates to improve the OER process. Based on the above-mentioned analyses, it is speculated that the actual active species for enhanced acidic water oxidation should be IrOx/Sm3IrO7, rather than Sm3IrO7 itself. Theoretical calculations confirm that the optimal energy level path of IrOx/Sm3IrO7 follows the lattice oxygen mechanism, and the energy level of surface Ir 5d orbitals is lower than O 2p orbitals in IrOx/Sm3IrO7, enabling it a superior OER activity.

Diffusion-Mediated Morphological Transformation in Bifunctional Mn2O3/CuO-(VO)3(PO4)2·6H2O for Enhanced Electrochemical Water Splitting

A strategical approach for morphological transformation and heterojunction formation was utilized to suppress the shortcomings of uni-metal oxide electrocatalysts and enhance their bifunctionality. In situ generation of copper oxide (CuO) over the surface of manganese oxide (Mn₂O₃) resulted in a morphological transformation from solid spheres to hollow spherical structures due to the ion-exchange diffusion (Kirkendall effect) of Cu ions into Mn₂O₃ particles. This hollowness resulted in the advancement of the bifunctional electrocatalytic behavior of Mn₂O₃/CuO (overpotential (η₁₀) of 280 mV for an OER and 310 mV for an HER at a current density of 10 mA/cm²) by virtue of increased exposed surface active sites aiding the adsorption of water molecules on the surface. The increased electrochemical active surface area (ECSA/C_dl = 34 mF/cm²) and reduced charge transfer resistance resulted in the formation of Mn₂O₃/CuO hollow spheres to achieve an approximately threefold enhancement in the turnover frequency (TOF) compared to the bare Mn₂O₃. The electrocatalytic efficiency of Mn₂O₃/CuO was further enhanced by virtue of the faster charge transfer coefficient of two-dimensional (2D) vanadyl phosphate hexahydrate (VOP) sheets deposited over its surface. This boosted the overall water splitting with attained overpotential (η₁₀) values of 190 and 220 mV with Tafel slopes of 60 and 105 mV/decade for an OER and HER, respectively. The morphological transformation and formation of an n-p heterojunction between Mn₂O₃ and CuO based on their work function (φ) values evaluated from the density functional theory (DFT) calculation and the effect of the VOP overlayer for faster reaction kinetics at the electrolyte interface resulted in an ∼10-fold increment in TOF values compared to the bare counterpart.

Electrochemical tuning of a Cu3P/Ni2P hybrid for a promoted hydrogen evolution reaction

Developing novel and high performance electrocatalysts for use in hydrogen evolution reactions (HER) as substitutes for noble metal based electrocatalysts is imperative and, so far, has been a challenge. Herein, a self-supported Cu₃P/Ni₂P hybrid on nickel foam (Cu₃P/Ni₂P@NF) is prepared by a simple galvanic replacement reaction coupled with phosphorization. Subsequently, Cu₃P/Ni₂P@NF is modified by conducting cyclic voltammetry scans in 0.5 M H₂SO₄ solution. Interestingly, after electrochemical tuning, the as-prepared Cu₃P/Ni₂P@NF exhibits significantly enhanced HER activity. Particularly, the resultant Cu₃P/Ni₂P@NF catalyst after 4000 cycles exhibits superior catalytic activity and long-term stability for HER with an overpotential of only 67 mV at the current density of 10 mA cm^-2, and a low Tafel slope of 43.9 mV dec^-1. The improved HER performance is attributed to the increased intrinsic activity of the Cu₃P/Ni₂P@NF with its optimized crystal and electronic structure, as well as an increased number of accessible active sites due to surface dissolution and recrystallization induced by electrochemical modification.

Superionic conductor Ag2Se modulated CoSe2 nanosheets prepared via monometallic cation release for efficient pH-universal water electrolysis into hydrogen

Superionic conductors regulated transition metal chalcogenides are the newly emerged electrocatalyst in water electrolysis into clean hydrogen and oxygen. However, there is still much room for the development of structural design, electronic modulation and heterogeneous interface construction to improve the overall water splitting performance in pH-universal solutions, especially in alkaline and neutral mediums. Herein, using β-cyclodextrin (β-CD) and citric acid (CA) organics with abundant hydroxyl (-OH) and carboxyl (-COOH), a special Ag₂Se nanoparticles-decorated CoSe₂ flower-like nanosheets loaded on porous and conductive nickel foam substrate (Ag₂Se-CoSe₂/NF) was successfully constructed by a new method of monometallic cation release of coordinated cobalt. The Ag₂Se phase exerts the nature characteristics of superionic conductors to modulate the morphological and electronic structures of CoSe₂ as well as improve its conductivity. The generated rich active interfaces and abundant Se vacancy defects facilitate numerous active sites exposure to accelerate the hydrogen ion transport and charge transfer. Compared to the single-phase Ag₂Se/NF-8 and CoSe₂/NF, the prepared Ag₂Se-CoSe₂/NF-8 with a two-phase synergistic effect achieves an outstanding pH-universal electrocatalytic hydrogen production performance by water electrolysis, as evidenced by a lower overpotential (60 mV, 212 mV and 85 mV vs RHE at 10 mA cm^-2 for pH = 0.36, 7.00 and 13.70, respectively). Only a voltage of 1.55 V at 10 mA cm^-2 is required to implement the overall water splitting in an alkaline electrolyzer. This work provides significant guidance for the future designation and practical development of transition metal chalcogenides with superionic conductors applied in the electrocatalytic field.

Critical Review, Recent Updates on Zeolitic Imidazolate Framework-67 (ZIF-67) and Its Derivatives for Electrochemical Water Splitting

Design and construction of low-cost electrocatalysts with high catalytic activity and long-term stability is a challenging task in the field of catalysis. Metal-organic frameworks (MOF) are promising candidates as precursor materials in the development of highly efficient electrocatalysts for energy conversion and storage applications. This review starts with a summary of basic concepts and key evaluation parameters involved in the electrochemical water-splitting reaction. Then, different synthesis approaches reported for the cobalt-based Zeolitic imidazolate framework (ZIF-67) and its derivatives are critically reviewed. Additionally, several strategies employed to enhance the electrocatalytic activity and stability of ZIF-67-based electrocatalysts are discussed in detail. The present review provides a succinct insight into the ZIF-67 and its derivatives (oxides, hydroxides, sulfides, selenides, phosphide, nitrides, telluride, heteroatom/metal-doped carbon, noble metal-supported ZIF-67 derivatives) reported for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting applications. Finally, this review concludes with the associated challenges and the perspectives on developing the best economic, durable electrocatalytic materials.

Local Photothermal Effect Enabling Ni3 Bi2 S2 Nanoarray Efficient Water Electrolysis at Large Current Density

In terms of the large-scale hydrogen production by water electrolysis, achieving the bifunctional electrocatalyst with high efficiency and stability at high current densities is of great significance but still remains a grand challenge. To address this issue, herein, one unique hybrid electrode is synthesized with the local photothermal effect (LPTE) by supporting the novel ternary nickel (Ni)bismuth (Bi)sulfur (S) nanosheet arrays onto nickel foam (Ni₃ Bi₂ S₂ @NF) via a one-pot hydrothermal reaction. The combined experimental and theoretical observations reveal that owing to the intrinsic LPTE action of Bi, robust phase stability of Ni₃ Bi₂ S₂ as well as the synergistic effect with hierarchical configuration, upon injecting the light, the as-prepared Ni₃ Bi₂ S₂ exhibits remarkably improved efficiency of 44% and 35% for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Such enhanced values are also comparable to those performed in working media heated to 80 °C. In addition, the overall water splitting system by using Ni₃ Bi₂ S₂ @NF as bifunctional electrodes only delivers an ultralow voltage of 1.40 V at 10 mA cm^-2 under LPTE, and can be stable more than 36 h at 500-1000 mA cm^-2 . More broadly, even worked at 0-5 °C, alkaline simulated seawater and high salt seawater, the electrodes still show apparent LPTE effect for improving catalytic efficiency.

High catalytic performance of nano-flowered Mg-doped NiCo layered double hydroxides for the oxygen evolution reaction

Layered double hydroxides (LDHs) are one of the ideal functional materials for the oxygen evolution reaction (OER) because of their special configuration and good electrochemical activity.

Polyoxometalate-based metal–organic complexes and their derivatives as electrocatalysts for energy conversion in aqueous systems

The research progress on polyoxometalate-based metal–organic complexes and their derivatives as electrocatalysts in sustainable and clean energy conversion applications in aqueous systems is summarized.

Electronically modulated nickel boron by CeOx doping as a highly efficient electrocatalyst towards overall water splitting

Exploiting economic, efficient and durable non-noble metal electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is promising, but still faces enormous challenges. Herein, the strategy of doping a metal boride with a rare earth metal oxide has been explored to develop a highly efficient bifunctional electrocatalyst. The novel electrocatalyst CeO_x-NiB consists of CeO_x-doped NiB supported on nickel foam, and was fabricated by a one-step mild electroless plating reaction. Remarkably, the CeO_x-NiB@NF electrode delivers a current density of 10 mA cm^-2 at overpotentials of only 19 mV and 274 mV for the HER and OER, respectively. Two-electrode electrolyzers with the CeO_x-NiB@NF electrode require only 1.424 V to deliver 10 mA cm^-2 for overall water splitting in 1.0 M KOH, outperforming the Pt-C/NF∥IrO₂/NF electrolyzer. Meanwhile, the electrode also has good stability (can work for 100 hours at 10 mA cm^-2) and industrial-grade current density. This work provides a new idea for the development of efficient and durable non-precious metal catalysts.

Engineering oxygen vacancies in CoO@Co3O4/C nanocomposites for enhanced electrochemical performances

Efficient electrocatalyst materials for several applications, including energy storage and conversion, have become vital for achieving technological progress. In this work, a CoO@Co₃O₄/C composite with abundant oxygen vacancies was successfully synthesized. The concentration of the oxygen vacancies was well controlled by changing the degree of vacuum during the heat treatment and was characterized by XPS and EPR. The existence of the porous structure arising from the cobalt oxide particles embedded in the carbon matrix provided an efficient charge and gas transmission path, significantly improving the performance of electrocatalytic oxygen evolution. Sufficient reactive sites were provided from both the oxygen vacancies and the heterogeneous interface. The mechanism of enhanced OER originating from the built-in electric field derived from oxygen vacancies was investigated. Consequently, the CoO@Co₃O₄/C composites offered an OER overpotential of 287 mV at a current density of 10 mA cm^-2 with good stability in 1 mol L^-1 KOH. In addition, combined with surface photovoltage (SPV), transient photovoltage (TPV), DFT, and in situ Raman spectroscopy, the effect of oxygen defects on the electron migration ability and transformation of the intermediate products were investigated to further understand the nature of catalytic activity in OER.

Sulfur doped FeOx nanosheet arrays supported on nickel foam for efficient alkaline seawater splitting

Developing economical, efficient and stable bifunctional catalysts for hydrogen production from seawater is of great significance for hydrogen utilization. Herein, sulfur doped iron oxide nanosheet arrays supported on nickel foam (FeO_x-Ni₃S₂@NF) are prepared by a one-pot solvothermal reaction. Owing to the high intrinsic activity of FeO_x-Ni₃S₂, the large catalytic specific surface area of nanosheet arrays and the fast charge transportation capability achieved by the self-supporting configuration, the FeO_x-Ni₃S₂@NF electrode delivers excellent catalytic performance in alkaline simulated seawater (1 M KOH + 0.5 M NaCl). Impressively, a low overpotential of 120 mV at 50 mA cm^-2 with a Tafel slope of 57 mV dec^-1 for the hydrogen evolution reaction and an overpotential of 470 mV at 200 mA cm^-2 with a Tafel slope of 62 mV dec^-1 for the oxygen evolution reaction are achieved. More importantly, the voltage is only 1.5 V at 50 mA cm^-2 for continuous overall water splitting for 100 h at 200 mA cm^-2 with negligible decay in alkaline simulated seawater with almost 100% Faraday efficiency. This work provides a simple and universal strategy to prepare highly efficient bifunctional catalytic materials, promoting the development of Earth-abundant materials to catalyse seawater splitting to produce high-purity hydrogen.