A review on the preparation, microstructure, and photocatalytic performance of Bi2O3 in polymorphs

Modulating Surface-Adsorbed Oxygen Species of Bismuth Silicate by a Solid Solution Strategy for Efficient Adsorption and Photocatalytic Activity

Bismuth silicate photocatalysts suffer from insufficient photocatalytic activity due to an insufficient number of surface active sites and low carrier separation and transport efficiency, which can be solved by defect modulation. Herein, Bi12SiO20/Bi2O2SiO3-BiOClxBr1-x (BSOCB) photocatalysts with a high concentration of surface-adsorbed oxygen species (SAOS) are synthesized by introducing a BiOClxBr1-x solid solution to modify nonhomogeneous BSO via an ion exchange strategy. The introduction of a solid solution enables the generation of dispersed nanoflowers and the regulation of SAOS due to the fact that anion-cation copolymerization guides the crystal growth, and the defects generated by the lattice distortion modulate the concentration of SAOS on the catalysts during the solid solution process. The obtained typical BSOCB photocatalyst possesses both high adsorption and photocatalytic properties, and the results show that it not only can almost completely degrade the traditional pollutant RhB within 20 min but also strongly degrades antibiotics, such as CIP (light for 150 min, 96%), NFX (light for 150 min, 87%), and TC (light for 150 min, 77%). This work provides a new approach for obtaining bismuth-based photocatalysts with controllable morphology and a large number of surface active sites and provides a theoretical and experimental basis for expanding the application scenarios of photocatalysts.

Au nanoparticles decorated β-Bi2O3 as highly-sensitive SERS substrate for detection of methylene blue and methyl orange

In this work, Au/Bi2O3 was synthesized by loading Au nanoparticles (NPs) onto β-Bi2O3 by a simple solution reduction method. β-Bi2O3 was synthesized by a precipitation-thermal decomposition procedure, which results in significantly improved SERS detection limits down to 10-9 M for methylene blue (MB) and 10-7 M for methyl orange (MO) as probe molecules, comparable to those reported for the best semiconductor SERS substrates. In particular, further deposition of Au NPs (5.20% wt%) onto β-Bi2O3 results in a two-order-of-magnitude enhancement in detection sensitivity, achieving a detection limit of 10-11 M for MB and 10-9 M for MO. Under ultraviolet/visible irradiation, the Au/Bi2O3 hybrids substrate exhibits superior self-cleaning ability due to its photocatalytic degradation ability which can be applied repeatedly to the detection of pollutants. The advanced composite substrate simultaneously achieved ultra-low mass loading of Au NPs, outstanding detection performance, good reproducibility, high stability and self-cleaning ability. The development strategy of low load noble metal coupled high performance semiconductor β-Bi2O3 to obtain nano-hybrid materials provides a method to balance SERS sensitivity, cost effectiveness and operational stability, and can be synthesized in large quantities, which is a key step towards commercialization and has good reliability prospects.

Study on the Preparation and PEC-Type Photodetection Performance of β-Bi2O3 Thin Films

Bismuth-based compounds have been regarded as a kind of promising material due to their narrow bandgap, high carrier mobility, low toxicity, and strong oxidation ability, showing potential applications in the field of photoelectrochemical (PEC) activities. They can be applied in sustainable energy production, seawater desalination and treatment, optical detection and communication, and other fields. As a member of the broader family of bismuth-based materials, β-Bi2O3 exhibits significant advantages for applications in engineering, including high photoelectric response, stability in harsh environments, and excellent corrosion resistance. This paper presents the synthesis of β-Bi2O3 thin films utilizing the mist chemical vapor deposition (CVD) method at the optimal temperature of 400 °C. Based on the β-Bi2O3 thin film synthesized at optimal temperature, a PEC-type photodetector was constructed with the highest responsivity R of 2.84 mA/W and detectivity D of 6.01 × 1010 Jones, respectively. The photodetection performance was investigated from various points like illumination light wavelength, power density, and long-term stability. This study would broaden the horizontal and practical applications of β-Bi2O3.

Review on synthetic approaches and PEC activity performance of bismuth binary and mixed-anion compounds for potential applications in marine engineering

Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds.

Development of spray pyrolysis-synthesised Bi2O3 thin films for photocatalytic applications

Photocatalysis is a green and cost-effective approach to environmental remediation. While TiO2 is considered one of the benchmark photocatalysts, alternative materials such as Bi2O3 have recently attracted increasing scientific attention as prospective visible light photocatalysts. This study aimed to develop a strategy for Bi2O3 thin film deposition via ultrasonic spray pyrolysis and systematically study process variables for the deposition of β-Bi2O3 thin films for photocatalytic applications. To achieve the aim, the precursor solution concentration as well as deposition and annealing temperature were optimised. The structural, optical, morphological, chemical and wettability properties of the obtained Bi2O3 thin films were investigated with respect to the effect on the photocatalytic oxidation of 10 ppm methyl orange (MO). The highest photocatalytic activity (48% in 5 h) under UV-A was recorded for the β-Bi2O3 film deposited using 0.1 M precursor solution at 300 °C and heat-treated for 1 h in air at 350 °C. Deposition at 300 °C resulted in an amorphous film structure, whereas annealing at 350 °C led to the formation of the β-Bi2O3 phase with the dominant facet orientation (220). These results show the suitability of spray pyrolysis for the deposition of Bi2O3 thin films with promising results for MO dye degradation, expanding the range of suitable photocatalytic materials.

Investigation of the Photocatalytic Performance, Mechanism, and Degradation Pathways of Rhodamine B with Bi2O3 Microrods under Visible-Light Irradiation

In the present work, the photodegradation of Rhodamine B with different pH values by using Bi2O3 microrods under visible-light irradiation was studied in terms of the dye degradation efficiency, active species, degradation mechanism, and degradation pathway. X-ray diffractometry, polarized optical microscopy, scanning electron microscopy, fluorescence spectrophotometry, diffuse reflectance spectra, Brunauer-Emmett-Teller, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, UV-visible spectrophotometry, total organic carbon, and liquid chromatography-mass spectroscopy analysis techniques were used to analyze the crystal structure, morphology, surface structures, band gap values, catalytic performance, and mechanistic pathway. The photoluminescence spectra and diffuse reflectance spectrum (the band gap values of the Bi2O3 microrods are 2.79 eV) reveals that the absorption spectrum extended to the visible region, which resulted in a high separation and low recombination rate of electron-hole pairs. The photodegradation results of Bi2O3 clearly indicated that Rhodamine B dye had removal efficiencies of about 97.2%, 90.6%, and 50.2% within 120 min at the pH values of 3.0, 5.0, and 7.0, respectively. In addition, the mineralization of RhB was evaluated by measuring the effect of Bi2O3 on chemical oxygen demand and total organic carbon at the pH value of 3.0. At the same time, quenching experiments were carried out to understand the core reaction species involved in the photodegradation of Rhodamine B solution at different pH values. The results of X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and X-ray diffractometer analysis of pre- and post-Bi2O3 degradation showed that BiOCl was formed on the surface of Bi2O3, and a BiOCl/Bi2O3 heterojunction was formed after acid photocatalytic degradation. Furthermore, the catalytic degradation of active substances and the possible mechanism of the photocatalytic degradation of Rhodamine B over Bi2O3 at different pH values were analyzed based on the results of X-ray diffractometry, radical capture, Fourier-transform infrared spectroscopy, total organic carbon analysis, and X-ray photoelectron spectroscopy. The degradation intermediates of Rhodamine B with the Bi2O3 photocatalyst in visible light were also identified with the assistance of liquid chromatography-mass spectroscopy.

Construction of Z-scheme Bi2O3/CeO2 heterojunction for enhanced photocatalytic capacity of TiO2 NTs

Photocatalytic technology was recognized to be the effective strategy to overcome the obstacles of environment pollution and energy shortage, and the novel photocatalyst design/construction was the key point for photocatalytic performance improvement. In this paper, the Z-scheme Bi2O3 and CeO2 heterojunction was constructed on TiO2 nanotube arrays (TiO2 NTs) by the hydrothermal deposition method. The Bi2O3-CeO2 cosensitization not only extended the solar absorption region but also accelerated the photoelectron separation and transfer, finally enhanced the photocatalytic property. The photocatalysts exhibited the high RhB/MB photodegradation and Cr(VI) reduction, and the photoelectric conversion and photocatalytic H2 evolution were also preeminent. The Z-scheme heterojunction construction was recognized to be the reason for the high photoactivity, and O2- and OH radicals were formed and investigated as the main active species for the dye photodegradation. The work gives the simple method and idea to construct novel ternary Z-scheme heterojunctions with high photocatalytic capacity for environment remediation and new energy development.

An ultrasensitive ratiometric electrochemical aptasensor based on metal-organic frameworks and nanoflower-like Bi2CuO4 for human epidermal growth factor receptor 2 detection

An ultra-sensitive ratiometric electrochemical aptasensor was constructed based on metal-organic frameworks (MOFs) and bimetallic oxides for the detection of the human epidermal growth factor receptor 2 (HER2), a breast cancer marker. The aluminum metal-organic framework (Al-MOF) and cerium-metal-organic framework (Ce-MOF) have higher specific surface area, which is conducive to load more aptamers or complementary DNA (cDNA), and realize the amplification of internal reference signal Fc. Furthermore, nanoflower-like bismuth copper oxide (Bi2CuO4) with abundant active sites was introduced to modify more aptamers on its surface, which were then fixed to the glassy carbon electrode (GCE) to amplify the detection signal. The quantitative detection of HER2 was achieved by differential pulse voltammetry (DPV), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The materials were characterized by scanning electron microscope, transmission electron microscope, Zeta potential analyzer, X-ray diffraction and X-ray photoelectron spectroscopy. The ratiometric electrochemical aptasensor based on nanomaterial and chain displacement signal amplification technology could discern HER2 in a very wide range (0.001-20.0 ng/mL) with an extremely low detection limit (0.049 pg/mL) and has demonstrated good performance in clinical serum analysis. This strategy also provides a feasible idea for sensitive analysis of other clinical tumor markers.

Fabrication of Bi2O3/Bismuth Titanates Modified with Metal-Organic Framework-In2S3/CdIn2S4 Materials for Electrocatalytic H2 Production and Its Photoactivity

Compositional and structural elucidation of the materials is important to know their properties, chemical stability, and electro-photoactivity. The heterojunction electrocatalyst and photocatalyst activity could open a new window for solving the most urgent environmental and energy problems. Here, for the first time, we have designed and fabricated Bi2O3/bismuth titanates modified with MOF-In2S3/CdIn2S4 materials by a stepwise process. The detailed structural elucidation and formation of mixed composite phases were studied in detail. It has been found that the formed composite was efficiently utilized for the electrocatalytic H2 production reaction and the photocatalytic degradation of tetracycline. XRD patterns for the metal-organic framework-In2S3 showed a main compound of MOF, and it was assigned to a MIL-53 MOF phase, with a monoclinic structure. The addition of CdCl2 onto the MOF-In2S3 phase effectively produced a CdIn2S4 flower platform on the MOF rods. The uniform dispersion of the bismuth titanates in MOF-In2S3/CdIn2S4 materials is detected by mapping of elements obtained by dark-field HAADF-STEM. Finally, the predictions of how to integrate experiments and obtain structural results more effectively and their common development in new heterojunctions for electro-/photocatalytic applications are presented.

Experimental and computational study of metal oxide nanoparticles for the photocatalytic degradation of organic pollutants: a review

Photocatalysis is a more proficient technique that involves the breakdown or decomposition of different organic contaminants, various dyes, and harmful viruses and fungi using UV or visible light solar spectrum. Metal oxides are considered promising candidate photocatalysts owing to their low cost, efficiency, simple fabricating method, sufficient availability, and environment-friendliness for photocatalytic applications. Among metal oxides, TiO2 is the most studied photocatalyst and is highly applied in wastewater treatment and hydrogen production. However, TiO2 is relatively active only under ultraviolet light due to its wide bandgap, which limits its applicability because the production of ultraviolet is expensive. At present, the discovery of a photocatalyst of suitable bandgap with visible light or modification of the existing photocatalyst is becoming very attractive for photocatalysis technology. However, the major drawbacks of photocatalysts are the high recombination rate of photogenerated electron-hole pairs, the ultraviolet light activity limitations, and low surface coverage. In this review, the most commonly used synthesis method for metal oxide nanoparticles, photocatalytic applications of metal oxides, and applications and toxicity of different dyes are comprehensively highlighted. In addition, the challenges in the photocatalytic applications of metal oxides, strategies to suppress these challenges, and metal oxide studied by density functional theory for photocatalytic applications are described in detail.

Synthesis of Petitjeanite Bi3O(OH)(PO4)2 Photocatalytic Microparticles: Effect of Synthetic Conditions on the Crystal Structure and Activity toward Degradation of Aqueous Perfluorooctanoic Acid (PFOA)

The discovery of synthetic Bi₃O(OH)(PO₄)₂ [BOHP] and its application toward photocatalytic oxidation of the water contaminant perfluorooctanoic acid (PFOA) have prompted further interest in development. Despite its high activity toward PFOA degradation, the scarce appearance in the literature and lack of research have left a knowledge gap in the understanding of BOHP synthesis, formation, and photocatalytic activity. Herein, we explore the crystallization of BOHP microparticles via hydrothermal syntheses, focusing on the influence of ions and organics present in the reaction solution when using different hydroxide amendments (NaOH, NH₄OH, NMe₄OH, and NEt₄OH). To better understand the unique structure-activity aspects of BOHP, the related bismuth oxy phosphate (BOP) structural family was also explored, including A-BOP (A = Na⁺ and K⁺) and M-BOP derivatives (M = Ca²⁺, Sr²⁺, and Pb²⁺). Results from materials characterization, including X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, indicated that the crystal structure, morphology, and atomic composition were significantly influenced by solution pH, inorganic metal cations (Na⁺, K⁺, Ca²⁺, Sr²⁺, and Pb²⁺), and organic amines. Experiments involving ultraviolet photocatalytic destruction of PFOA by a BOHP suspension revealed that catalytic activity was influenced by the choice of reagents and their variable effect on surface facet growth and crystal defects in the resulting microparticles. Together, this work provides a strategy for crystal facet and surface defect engineering with the potential to expand to other metal oxides within the hydrothermal system.

Biomimetic Guided Bi2WO6/Bi2O3 Vertical Heterojunction with Controllable Microstructure for Efficient Photocatalysis

To bridge the technical gap of heterojunction induction control in conventional semiconductor photocatalysts, a method of regulating the growth of heterojunctions utilizing biomimetic structures was designed to prepare a series of Bi2WO6/Bi2O3 vertical heterojunction nanocomposites for the disposal of environmentally hazardous tetracycline wastewater difficult to degrade by conventional microbial techniques. Porous Bi2O3 precursors with high-energy crystalline (110) dominant growth were produced using the sunflower straw bio-template technique (SSBT). Bi2WO6 with a (131) plane grew preferentially into 2.8 to 4 nm pieces on the (110) plane of Bi2O3, causing a significant density reduction between Bi2WO6 pieces and a dimensional decrease in the agglomerated Bi2WO6 spheres from 3 μm to 700 nm since Bi2WO6 grew on the structure of the biomimetic Bi2O3. The optimal 1:8 Bi2WO6/Bi2O3 coupling catalyst was obtained via adapting the ratio of the two semiconductors, and the coupling ratio of 1:8 minimized the adverse effects of the overgrowth of Bi2WO6 on degradation performance by securing the quantity of vertical heterojunctions. The material degradation reaction energy barrier and bandgap were significantly reduced by the presence of a large number of vertical heterojunction structures, resulting in a material with lower impedance and higher electron–hole separation efficiency; thus, the degradation efficiency of 1:8 Bi2WO6/Bi2O3 for tetracycline hydrochloride reached 99% within 60 min. In conclusion, this study not only successfully synthesized a novel photocatalyst with potential applications in water pollution remediation but also introduced a pioneering approach for semiconductor-driven synthesis.

Visible-light driven p-n heterojunction formed between α-Bi2O3 and Bi2O2CO3 for efficient photocatalytic degradation of tetracycline

To improve the efficiency of photocatalytic oxidative degradation of antibiotic pollutants, it is essential to develop an efficient and stable photocatalyst. In this study, a polymer-assisted facile synthesis strategy is proposed for the polymorph-controlled α-Bi₂O₃/Bi₂O₂CO₃ heterojunction retained at elevated calcination temperatures. The p-n heterojunction can effectively separate and migrate electron-hole pairs, which improves visible-light-driven photocatalytic degradation from tetracycline (TC). The BO-400@PAN-140 photocatalyst achieves the highest pollutant removal efficiency of 98.21% for photocatalytic tetracycline degradation in 1 h (λ > 420 nm), and the degradation efficiency was maintained above 95% after 5 cycles. The morphology, crystal structure, and chemical state of the composites were analysed by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Ultraviolet-visible diffuse reflection, transient photocurrent response, and electrochemical impedance spectroscopy were adopted to identify the charge transfer and separation efficiency of photogenerated electron-hole pairs. The EPR results verified h⁺ and ˙OH radicals as the primary active species in the photocatalytic oxidation reactions. This observation was also consistent with the results of radical trapping experiments. In addition, the key intermediate products of the photocatalytic degradation of TC over BO-400@PAN-140 were identified via high-performance liquid chromatography-mass spectrometry, which is compatible with two possible photocatalytic reaction pathways. This work provides instructive guidelines for designing heterojunction photocatalysts via a polymer-assisted semiconductor crystallographic transition pathway for TC degradation into cleaner production.

Green route synthesis and characterization of β-Bi2O3/SiO2 and β-Bi2O3/Bi2O2.75/SiO2 using Juglans regia L. shell aqueous extract and photocatalytic properties for the degradation of RB-5

Background

Photocatalyst oxides added with silicon improve their photocatalytic properties. In this research, nanostructured β-Bi2O3/SiO2 and β-Bi2O3/Bi2O2.75/SiO2 were obtained by means of a green method mediated by the using the aqueous extract of J. regia shell as the source of reducing biomolecules and as a natural source of plant silicon.

Method

The β-Bi2O3/SiO2 and β-Bi2O3/Bi2O2.75/SiO2 nanostructures were characterized by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy (HR-TEM), field emission scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet–visible diffuse reflectance spectroscopy (UV–Vis DRS), and photoluminescence spectroscopy. The photocatalytic activity was measured by the degradation of Reactive Black 5 dye (RB-5).

Results

FT-IR and XPS demonstrated the presence of plant silicon in the bismuth oxide photocatalysts. HR-TEM showed that the crystal size of the as-synthesized materials is ~ 25 nm and revealed that the β-Bi2O3 synthesized with ground shell extract and heat-treated at 300 °C contains the Bi2O2.75 phase. Good photocatalytic activity was found in all the studied materials; particularly, the heat-treated nanostructures showed excellent properties resulting in 92% degradation of RB-5 under UV–Vis light after 15 min of exposure, and 98% after 180 min.

Conclusions

The findings of this research suggest that the metabolites coating the Bi2O3, which generate a large amount of hydroxyl radicals, the plant silicon content, and the crystalline defects conferred by the synthesis medium, all contribute to the improved degradation of the azo dye, providing the nanostructures with better photocatalytic activity.

Structural, Optical and Photocatalytic Activity of Multi-heterojunction Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 Nanoflakes Synthesized via Submerged DC Electrical Discharge in Urea Solution

In this research, a novel ternary multi-heterojunction Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 photocatalyst is fabricated via submerged DC electrical arc discharge in urea solution. FT-IR, XRD, EDS and PL results confirm the formation of Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 multi-heterojunction. Formation of nanoflake morphology is revealed by FE-SEM and TEM images. The optical properties and intense absorption edge of Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 reveal the proper visible light absorbing ability. The photocatalytic performance of the sample is investigated via the degradation of methylene orange (MeO) and rhodamine B (RB) under visible light irradiation. The photocatalytic activity of Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 is compared with the synthesized sample in water, Bi2O3/Bi/Bi(OH)3, which exhibits much higher photocatalytic activity. Also, the stable photodegradation efficiency of Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 after four cycles reveals the long-term stability and reusability of the synthesized photocatalyst. The PL intensity of Bi2O3/Bi2O2CO3/(BiO)4CO3(OH)2 shows an improved separation rate of electron-hole pairs and so enhanced photocatalytic performance. The improved photocatalytic activity can be ascribed to the formation of multi-heterojunctions, flake morphology and intrinsic internal electric field (IEF). Multi-heterojunction nanoflakes enhance the absorbance of visible light and facilitate the separation and transport of photogenerated electron holes through large IEF. Our work offers an effective method for the production of innovative bismuth-based photocatalyst with excellent prospects for the degradation of environmental pollutants and light harvesting for renewable energy generation under visible light.

Plasmonic Ag Nanoparticle-Loaded n-p Bi2O2CO3/α-Bi2O3 Heterojunction Microtubes with Enhanced Visible-Light-Driven Photocatalytic Activity

In this study, n-p Bi2O2CO3/α-Bi2O3 heterojunction microtubes were prepared via a one-step solvothermal route in an H2O-ethylenediamine mixed solvent for the first time. Then, Ag nanoparticles were loaded onto the microtubes using a photo-deposition process. It was found that a Bi2O2CO3/α-Bi2O3 heterostructure was formed as a result of the in situ carbonatization of α-Bi2O3microtubes on the surface. The photocatalytic activities of α-Bi2O3 microtubes, Bi2O2CO3/α-Bi2O3 microtubes, and Ag nanoparticle-loaded Bi2O2CO3/α-Bi2O3 microtubes were evaluated based on their degradation of methyl orange under visible-light irradiation (λ > 420 nm). The results indicated that Bi2O2CO3/α-Bi2O3 with a Bi2O2CO3 mass fraction of 6.1% exhibited higher photocatalytic activity than α-Bi2O3. Loading the microtubes with Ag nanoparticles significantly improved the photocatalytic activity of Bi2O2CO3/α-Bi2O3. This should be ascribed to the internal static electric field built at the heterojunction interface of Bi2O2CO3 and α-Bi2O3 resulting in superior electron conductivity due to the Ag nanoparticles; additionally, the heterojunction at the interfaces between two semiconductors and Ag nanoparticles and the local electromagnetic field induced by the surface plasmon resonance effect of Ag nanoparticles effectively facilitate the photoinduced charge carrier transfer and separation of α-Bi2O3. Furthermore, loading of Ag nanoparticles leads to the formation of new reactive sites, and a new reactive species ·O2− for photocatalysis, compared with Bi2O2CO3/α-Bi2O3.

Polymorphism and Visible-Light-Driven Photocatalysis of Doped Bi2O3:M (M = S, Se, and Re)

δ-Bi₂O₃:M (M = S, Se, and Re) with an oxygen-defective fluorite-type structure is obtained by a coprecipitation method starting from the bismuth oxido cluster [Bi₃₈O₄₅(OMc)₂₄(dmso)₉]·2dmso·7H₂O (A) in the presence of additives such as Na₂SO₄, Na₂SeO₄, NH₄ReO₄, Na₂SeO₃·5H₂O, and Na₂SO₃. The coprecipitation of the starting materials with aqueous NaOH results in the formation of alkaline reaction mixtures, and the cubic bismuth(III)-based oxides Bi₁₄O₂₀(SO₄) (1c), Bi₁₄O₂₀(SeO₄) (2c), Bi₁₄O₂₀(ReO_4.5) (3c), Bi_12.25O_16.625(SeO₃)_1.75 (4c), and Bi_10.51O_14.765(SO₃)_0.49(SO₄)_0.51 (5c) are obtained after microwave-assisted heating; formation of compound 5c is the result of partial oxidation of sulfur. The compounds 1c, 2c, 4c, and 5c absorb UV light only, whereas compound 3c absorbs in the visible-light region of the solar spectrum. Thermal treatment of the as-prepared metastable bismuth(III) oxide chalcogenates 1c and 2c at T = 600 °C provides a monotropic phase transition into their tetragonal polymorphs Bi₁₄O₂₀(SO₄) (1t) and Bi₁₄O₂₀(SeO₄) (2t), while compound 3c is transformed into the tetragonal modification of Bi₁₄O₂₀(ReO_4.5) (3t) after calcination at T = 700 °C. Compounds of the systems Bi₂O₃-SO_x (x = 2 and 3) and Bi₂O₃-Re₂O₇ are thermally stable up to T = 800 °C, whereas compounds of the system Bi₂O₃-SeO₃ completely lose SeO₃. Thermal treatment of 4c and 5c in air results in the oxidation of the tetravalent to hexavalent sulfur and selenium, respectively, upon heating to T = 400-500 °C. The as-prepared cubic bismuth(III)-based oxides 1c-5c were studied with regard to the photocatalytic decomposition of rhodamine B under visible-light irradiation with compound 3c showing the highest turnover and efficiency.