Tuning the electro-optical properties of nanowire networks

Electrical conductance of two-dimensional random percolating networks based on mixtures of nanowires and nanorings: A mean-field approach along with computer simulation

We have studied the electrical conductance of two-dimensional (2D) random percolating networks of zero-width metallic nanowires (a mixture of rings and sticks). We took into account the nanowire resistance per unit length and the junction (nanowire-nanowire contact) resistance. Using a mean-field approximation (MFA) approach, we derived the total electrical conductance of these nanowire-based networks as a function of their geometrical and physical parameters. The MFA predictions have been confirmed by our Monte Carlo (MC) numerical simulations. The MC simulations were focused on the case when the circumferences of the rings and the lengths of the wires were equal. In this case, the electrical conductance of the network was found to be almost insensitive to the relative proportions of the rings and sticks, provided that the wire resistance and the junction resistance were equal. When the junction resistance dominated over the wire resistance, a linear dependency of the electrical conductance of the network on the proportions of the rings and sticks was observed.

Large-Scale Preparation of Silver Nanowire-Based Flexible Transparent Film Heaters by Slot-Die Coating

Highly flexible silver nanowire-based transparent conductive films (AgNWs TCFs) were large-scale fabricated by slot-die coating AgNWs inks on a flexible polyethylene terephthalate (PET) substrate, and further fabricated into a transparent film heater. Appropriate flow rate, coating speed, and AgNWs concentration allow the construction of the 15 cm × 15 cm AgNW TCFs with a sheet resistance (R_s) of less than 20 Ω/sq, a transmittance (T) at 550 nm higher than 95%, and a haze less than 3.5%. The resultant AgNW TCFs heater possesses high uniformity and superior mechanical stability and can reach a Joule heating temperature of 104 °C with a voltage of 12 V. The slot-die coating method has great potential for large-scale production of AgNW based film heaters promisingly used in window defrost and deicer systems.