Dual-electrocatalysis behavior of star-like zinc-cobalt-sulfide decorated with cobalt-molybdenum-phosphide in hydrogen and oxygen evolution reactions

Constructing Built-in-Electric Field for Boosting Electrocatalytic Water Splitting

Electrocatalytic water splitting shows great potential for producing clean and green hydrogen, but it is hindered by slow reaction kinetics. Advanced electrocatalysts are needed to lower the energy barriers. The establishment of built-in electric fields (BIEF) in heterointerfaces has been found to be beneficial for speeding up electron transfer, increasing electrical conductivity, adjusting the local reaction environment, and optimizing the chemisorption energy with intermediates. Engineering and modifying the BIEF in heterojunctions offer significant opportunities to enhance the electronic properties of catalysts, thus improving the reaction kinetics. This comprehensive review focuses on the latest advances in BIEF engineering in heterojunction catalysts for efficient water electrolysis. It highlights the fundamentals, engineering, modification, characterization, and application of BIEF in electrocatalytic water splitting. The review also discusses the challenges and future prospects of BIEF engineering. Overall, this review provides a thorough examination of BIEF engineering for the next generation of water electrolysis devices.

Mo2C-Based Ceramic Electrode with High Stability and Catalytic Activity for Hydrogen Evolution Reaction at High Current Density

Developing robust electrodes with high catalytic performance is a key step for expanding practical HER (hydrogen evolution reaction) applications. This paper reports on novel porous Mo2C-based ceramics with oriented finger-like holes directly used as self-supported HER electrodes. Due to the suitable MoO3 sintering additive, high-strength (55 ± 6 MPa) ceramic substrates and a highly active catalytic layer are produced in one step. The in situ reaction between MoO3 and Mo2C enabled the introduction of O in the Mo2C crystal lattice and the formation of Mo2C(O)/MoO2 heterostructures. The optimal Mo2C-based electrode displayed an overpotential of 333 and 212 mV at 70 °C under a high current intensity of 1500 mA cm-2 in 0.5 m H2SO4 and 1.0 m KOH, respectively, which are markedly better than the performance of Pt wire electrode; furthermore, its price is three orders of magnitude lower than Pt. The chronopotentiometric curves recorded in the 50 - 1500 mA cm-2 range, confirmed its excellent long-term stability in acidic and alkaline media for more than 260 h. Density functional theory (DFT) calculations showed that the Mo2C(O)/MoO2 heterostructures has an optimum electronic structure with appropriate *H adsorption-free energy in an acidic medium and minimum water dissociation energy barrier in an alkaline medium.

Rapid Construction of Double Crystalline Prussian Blue Analogue Hetero-Superstructure

The controllable construction of complex metal-organic coordination polymers (CPs) merits untold scientific and technological potential, yet remains a grand challenge of one-step construction and modulating simultaneously valence states of metals and topological morphology. Here, a thiocyanuric acid (TCA)-triggered strategy is presented to one-step rapid synthesis a double-crystalline Prussian blue analogue hetero-superstructure (PBA-hs) that comprises a Co3[Fe(CN)6]2 cube overcoated with a KCo[Fe(CN)6] shell, followed by eight self-assembled small cubes on vertices. Unlike common directing surfactants, TCA not only acts as a trigger for the fast growth of KCo[Fe(CN)6] on the Co3[Fe(CN)6]2 phase resulting in a PBA-on-PBA hetero-superstructure, but also serves as a flange-like bridge between them. By combining experiments with simulations, a deprotonation-induced electron transfer (DIET) mechanism is proposed for formation of second phase in PBA-hs, differing from thermally and photo-induced electron transfer processes. To prove utility, the calcined PBA-hs exhibits enhanced oxygen evolution reaction performance. This work provides a new method to design of novel CPs for enriching chemistry and material science. This work offers a practical approach to design novel CPs for enriching chemistry and material science.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Anchoring cobalt molybdenum nickel alloy nanoparticles on molybdenum dioxide nanosheets as efficient and stable self-supported catalyst for overall water splitting at high current density

Developing bifunctional electrocatalysts with efficient and stable catalytic performance at high current density to improve the productivity of water splitting is important for relieving the environmental pollution and energy crisis. Herein, the Ni₄Mo and Co₃Mo alloy nanoparticles were anchored on MoO₂ nanosheets (H-NMO/CMO/CF-450) by annealing the NiMoO₄/CoMoO₄/CF (CF: self-made cobalt foam) under Ar/H₂ atmosphere. Benefitting from the nanosheets structure, synergistic effect of the alloys, existence of oxygen vacancy and the cobalt foam with smaller pore sizes as conductive substrate, the self-supported H-NMO/CMO/CF-450 catalyst demonstrates outstanding electrocatalytic performance, which delivers small overpotential of 87 (270) mV at 100 (1000) mA·cm^-2 for HER and 281 (336) mV at 100 (500) mA·cm^-2 for OER in 1 M KOH. Meanwhile, the H-NMO/CMO/CF-450 catalyst is used as working electrodes for overall water splitting, which just require 1.46 V @ 10 mA·cm^-2 and 1.71 V @ 100 mA·cm^-2, respectively. More importantly, the H-NMO/CMO/CF-450 catalyst can stabilize for 300 h at 100 mA·cm^-2 in both HER and OER. This research provides an idea for the preparation of stable and efficient catalysts at high current density.

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.

A comprehensive review on the electrochemical parameters and recent material development of electrochemical water splitting electrocatalysts

Electrochemical splitting of water is an appealing solution for energy storage and conversion to overcome the reliance on depleting fossil fuel reserves and prevent severe deterioration of the global climate. Though there are several fuel cells, hydrogen (H2) and oxygen (O2) fuel cells have zero carbon emissions, and water is the only by-product. Countless researchers worldwide are working on the fundamentals, i.e. the parameters affecting the electrocatalysis of water splitting and electrocatalysts that could improve the performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) and overall simplify the water electrolysis process. Noble metals like platinum for HER and ruthenium and iridium for OER were used earlier; however, being expensive, there are more feasible options than employing these metals for all commercialization. The review discusses the recent developments in metal and metalloid HER and OER electrocatalysts from the s, p and d block elements. The evaluation perspectives for electrocatalysts of electrochemical water splitting are also highlighted.

Morphology Modulation and Phase Transformation of Manganese-Cobalt Carbonate Hydroxide Caused by Fluoride Doping and Its Effect on Boosting the Overall Water Electrolysis

Increasing demands for pollution-free energy resources have stimulated intense research on the design and fabrication of highly efficient, inexpensive, and stable non-noble earth-abundant metal catalysts with remarkable catalytic activity for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Morphology control of the catalysts is widely implemented as an effective strategy to change the surface atomic coordination and increase the catalytic behavior of the catalysts. In this study, we have designed a series of Mn-Co catalyts with different morphologies on the graphite paper substrate to enhance OER and HER activities in alkaline media. The prepared catalysts with different morphologies were successfully obtained by adjusting the amount of ammonium fluoride (NH₄F) in the hydrothermal process. The electrochemical tests display that the cubic-like Mn-Co catalyst with pyramids on the faces at a concentration of 0.21 M NH₄F exhibits the best activity toward both OER and HER. The cubic-like Mn-Co catalyst with pyramids on the faces showed overpotentials of 240 and 82 mV at a current density of 10 mA cm^-2 for OER and HER, respectively. Also, the cubic-like Mn-Co catalyst with pyramids on the faces required overpotentials of 319 and 216 mV to reach the current density of 100 mA cm^-2 for OER and HER, respectively. The current density of this catalyst at η = 0.32 V was 701.05 mA cm^-2 for OER, and for HER, the current density of the catalyst was 422.89 mA cm^-2 at η = 0.23 V. The Tafel slopes of the Mn-Co catalyst with cubic-like structures with pyramids on the faces were 78 and 121 mV dec^-1 for OER and HER, respectively. A two-electrode overall water electrolysis system using this bifunctional Mn-Co catalyst exhibited low cell voltages of 1.60 in the alkaline electrolyte at the standard current density of 10 mA cm^-2 with appropriate stability. These electrochemical merits exhibit the considerable potential of the cubic-like Mn-Co catalyst with pyramids on the faces for bifunctional OER and HER applications.

Cobalt vanadium chalcogenide microspheres decorated with dendrite-like fiber nanostructures for flexible wire-typed energy conversion and storage microdevices

The increasing energy demand for next-generation portable and miniaturized electronics has drawn tremendous attention to develop microscale energy storage and conversion devices with light weight and flexible characteristics. Herein, we report the preparation of flower-like cobalt vanadium selenide/nickel copper selenide (CoVSe/NiCuSe) microspheres with three-dimensional hierarchical structure of micropore growth on copper wire for a flexible fiber microsupercapacitor (microSC) and overall water splitting. The CoV-LDH microspheres are anchored on the dendrite-like NiCu nanostructured Cu wire using a hydrothermal method (CoV-LDH/NiCu@CW). The sulfidation and selenization of CoV-LDH/NiCu was carried out through the ion-exchange reaction of OH^- with sulfide and selenide ions to obtain CoVS/NiCuS@CW and CoVSe/NiCuSe@CW electrodes, respectively. Benefitting from the unique structure, the flower-like CoVSe/NiCuSe@CW microspheres exhibit better electrochemical performance compared with other as-prepared fiber-shaped electrodes. As an electrode active material for microSC, CoVSe/NiCuSe microspheres exhibit a specific capacitance of 35.40 F cm^-3 at 4 mA cm^-2, and maintain 281.25 F cm^-3 even at a high current density of 83 mA cm^-2, indicating outstanding charge storage capacitance and excellent rate capability. Moreover, the assembled flexible solid-state asymmetric microSCs based on flower-like CoVSe/NiCuSe microspheres-coated Cu wire as the positive electrode and polypyrrole/reduced graphene oxide-coated carbon fiber as the negative electrode manifests a maximum energy density of 20.17 mW h cm^-3 at a power density of 624.32 mW cm^-3 and remarkable cycling stability (96.7% after 5000 cycles) with good mechanical stability. As an electrocatalyst for oxygen and hydrogen evolution reactions in alkaline medium, the CoVSe/NiCuSe electrode delivers an overpotential of 297 mV and 165 mV at 100 mA cm^-2. Furthermore, the CoVSe/NiCuSe-based electrolysis cell for overall water splitting presents a low cell voltage (1.7 V at 50 mA cm^-2) as well as high durability.