Encapsulation of lead halide perovskite nanocrystals (NCs) at the single-particle level: strategies and properties

Strategies To Achieve Long-Term Stability in Lead Halide Perovskite Nanocrystals and Its Optoelectronic Applications

The lead halide perovskite (LHP) nanocrystals (NCs) research area is flourishing due to their exceptional properties and great potential for a wide range of applications in optoelectronics and photovoltaics. Yet, despite the momentum in the field, perovskite devices are not yet ready for commercialization due to degradation caused by intrinsic phase transitions and external factors such as moisture, temperature, and ultraviolet (UV) light. To attain long-term stability, we analyze the origin of instabilities and describe different strategies such as surface modification, encapsulation, and doping for long-term viability. We also assess how these stabilizing strategies have been utilized to obtain optoelectronic devices with long-term stability. This Mini-Review also outlines the future direction of each strategy for producing highly efficient and ultrastable LHP NCs for sustainable applications.

Exploiting the Photo-Physical Properties of Metal Halide Perovskite Nanocrystals for Bioimaging

Perovskite nanomaterials have recently been exploited for bioimaging applications due to their unique photo-physical properties, including high absorbance, good photostability, narrow emissions, and nonlinear optical properties. These attributes outperform conventional fluorescent materials such as organic dyes and metal chalcogenide quantum dots and endow them with the potential to reshape a wide array of bioimaging modalities. Yet, their full potential necessitates a deep grasp of their structure-attribute relationship and strategies for enhancing water stability through surface engineering for meeting the stringent and unique requirements of each individual imaging modality. This review delves into this evolving frontier, highlighting how their distinctive photo-physical properties can be leveraged and optimized for various bioimaging modalities, including visible light imaging, near-infrared imaging, and super-resolution imaging.

Improving the stability of perovskite nanocrystals via SiO2 coating and their applications

Lead halide perovskite nanocrystals (LHP NCs) with outstanding optical properties have been regarded as promising alternatives to traditional phosphors for lighting and next-generation display technology. However, the practical applications of LHP NCs are seriously hindered by their poor stability upon exposure to moisture, oxygen, light, and heat. Hence, various strategies have been proposed to solve this issue. In this review, we have focused our attention on improving the stability of LHP NCs via SiO2 coating because it has the advantages of simple operation, less toxicity, and easy repetition. SiO2 coating is classified into four types: (a) in situ hydrolytic coating, (b) mesoporous silica loading, (c) mediated anchoring, and (d) double coating. The potential applications of SiO2-coated LHP NCs in the field of optoelectronics, biology, and catalysis are presented to elucidate the reliability and availability of SiO2 coating. Finally, the future development and challenges in the preparation of SiO2-coated LHP NCs are analyzed in order to promote the commercialization process of LHP NC-related commodities.

Colloidal CsPbX3 Nanocrystals with Thin Metal Oxide Gel Coatings

Lead halide perovskite (LHP) nanocrystals (NCs) have gathered much attention as light-emitting materials, particularly owing to their excellent color purity, band gap tunability, high photoluminescence quantum yield (PLQY), low cost, and scalable synthesis. To enhance the stability of LHP NCs, bulky strongly bound organic ligands are commonly employed, which counteract the extraction of charge carriers from the NCs and hinder their use as photoconductive materials and photocatalysts. Replacing these ligands with a thin coating is a complex challenge due to the highly dynamic ionic lattice, which is vulnerable to the commonly employed coating precursors and solvents. In this work, we demonstrate thin (<1 nm) metal oxide gel coatings through non-hydrolytic sol-gel reactions. The coated NCs are readily dispersible and highly stable in short-chain alcohols while remaining monodisperse and exhibiting high PLQY (70-90%). We show the successful coating of NCs in a wide range of sizes (5-14 nm) and halide compositions. Alumina-gel-coated NCs were chosen for an in-depth analysis, and the versatility of the approach is demonstrated by employing zirconia- and titania-based coatings. Compact films of the alumina-gel-coated NCs exhibit electronic and excitonic coupling between the NCs, leading to two orders of magnitude longer photoluminescence lifetimes (400-700 ns) compared to NCs in solution or their organically capped counterparts. This makes these NCs highly suited for applications where charge carrier delocalization or extraction is essential for performance.

Suppression of Thermal Quenching for CsPbX3 (X = Cl, Br, and I) Quantum Dots via the Hollow Structure of SrTiO3 and Light-Emitting Diode Applications

All-inorganic perovskite quantum dots (PQDs, CsPbX₃, X = Cl, Br, and I) show outstanding application prospects in the field of photoelectric devices. In recent years, the development of PQDs has greatly improved their stability to water, oxygen, and light. However, thermal quenching of PQDs greatly limits their practical application. Herein, we embed PQDs into ATiO₃ (A = Ca, Ba, and Sr) of three different mesoporous spherical structures to explore the effect on thermal quenching of PQDs. Because of the unique mesoporous hollow microsphere structure and low thermal conductivity of SrTiO₃, it can effectively block the heat transfer and improve the thermal quenching of PQDs. The photoluminescence (PL) intensity of CsPbBr₃@SrTiO₃ composites is 72.6% of the initial intensity after heating to 120 °C. Moreover, the PL intensity of CsPbBr₃@SrTiO₃ composites remains about 80% of the initial value even when stored in air for 20 days or irradiated by 365 nm UV light for 48 h. A neutral white light-emitting diode is assembled by a blue chip, CsPbBr₃@SrTiO₃ composites, and red phosphor of K₂SiF₆:Mn⁴⁺, which has a color temperature of 5389 K and a color gamut covered 133% of National Television Standards Committee (NTSC).

Probing Chemical-Composition-Induced Heterostructures and Interfaces in Lead Halide Perovskites

Lead halide perovskites (LHP) are of great interest for their optoelectronic properties and photovoltaic applications. Various heterostructures are created in these materials to achieve favorable optical properties and improved stability at the interfaces during the fabrication of devices. Such heterostructures are often assumed to be formed based on the reactivity of precursors and are not directly probed. In this Feature Article, we report how various strategies have been employed in LHP thin films and nanocrystals (NCs) that generate heterostructures to boost their stability and photovoltaic (PV) efficiencies and how variable energy photoelectron spectroscopy (VEPES) can probe the chemical composition variation in heterostructured materials and interfaces. We specifically discussed the internal heterostructures of LHP NCs generated due to the surface chemistry and postsynthesis anion exchange followed by a detailed discussion of the heterostructures induced by the chemical composition (anion, cation, and degradation) of LHP thin films. The difficulties in determining heterostructures as well as the potential scope of the application of VEPES in unwrapping heterostructures in diverse materials are also discussed.

Colloidal FAPbBr3 perovskite nanocrystals for light emission: what's going on?

Semiconducting nanomaterials have been widely explored in diverse optoelectronic applications. Colloidal lead halide perovskite nanocrystals (NCs) have recently been an excellent addition to the field of nanomaterials, promising an enticing building block in the field of light emission. In addition to the notable optoelectronic properties of perovskites, the colloidal NCs exhibit unique size-dependent optical properties due to the quantum size effect, which makes them highly attractive for light-emitting diodes (LEDs). In the past few years, perovskite-based LEDs (PeLEDs) have demonstrated a meteoritic rise in their external quantum efficiency (EQE) values, reaching over 20% so far. Among various halide perovskite compositions, FAPbBr3 and its variants remain one of the most interesting and sought-after compounds for green light emission. This review focuses on recent progress in the design and synthesis protocols of colloidal FAPbBr3 NCs and the emerging concepts in tailoring their surface chemistry. The structural and physicochemical features of lead halide perovskites along with a comprehensive discussion on their defect-tolerant properties are briefly outlined. Later, the prevalent synthesis, ligand, and compositional engineering strategies to boost the stability and photoluminescence quantum yield (PLQY) of FAPbBr3 NCs are extensively discussed. Finally, the fundamental concepts and recent progress on FAPbBr3-based LEDs, followed by a discussion of the challenges and prospects that are on the table for this enticing class of perovskites, are reviewed.

Enhancing the Intrinsic and Extrinsic Stability of Halide Perovskite Nanocrystals for Efficient and Durable Optoelectronics

Over the past few years, metal halide perovskite nanocrystals have been at the forefront of colloidal semiconductor nanomaterial research because of their fascinating properties and potential applications. However, their intrinsic phase instability and chemical degradation under external exposures (high temperature, water, oxygen, and light) are currently limiting the real-world applications of perovskite optoelectronics. To overcome these stability issues, researchers have reported various strategies such as doping and encapsulation. The doping improves the optical and photoactive phase stability, whereas the encapsulation protects the perovskite NCs from external exposures. This perspective discusses the rationale of various strategies to enhance the stability of perovskite NCs and suggests possible future directions for the fabrication of optoelectronic devices with long-term stability while maintaining high efficiency.

Alcohol-Stable Perovskite Nanocrystals and Their In Situ Capsulation with Polystyrene

In recent years, lead halide perovskite nanocrystals (PNCs) have presented potential scalable applications in all fields due to their outstanding properties. However, most commonly used PNCs capped with oleic acid (OA) and oleylamine (OAm) suffer from bad stability in polar solutions and thus require various surface protections with organic or inorganic materials. Encapsulation with highly hydrophobic polystyrene (PS) is one of the most efficient ways to protect PNCs; however, the presently used swelling-shrinking strategy faces several challenges, such as weak interaction between PS chains and the surface ligands in nonpolar media causing a low encapsulation efficiency, and serious aggregation of PS particles during the shrinkage process leading to very different particle sizes. Herein, alcohol-stable polyacrylic acid-capped CsPbBr3 PNCs (i.e., PAA-PNCs) are first synthesized and then in situ encapsulated with PS shells by polymerizing styrene monomer on the PNC surfaces in a polar organic solvent (e.g., ethanol). The in situ PS-encapsulated PAA-PNCs (i.e., PAA-PNCs@iPS) exhibit outstanding monodispersity, remarkable water, heat, and UV stability, high fluorescence activity, and color purity. The unique synthesis strategy and good performances of PAA-PNCs@iPS will boost the applications of PNCs in LEDs, biological imaging, and chemosensing.