Mesoporous PtIr alloy single-particle: A novel SECM-tip for in situ monitoring NO of single-cell

As a vital factor in cell metabolism, nitric oxide (NO) is associated with nitrosative stress and subsequent inflammations and diseases. In situ, real-time NO monitoring is challenging due to its relative trace concentration and fast diffusion in cell. Scanning electrochemical microscopy (SECM) is suited uniquely for single-cell analysis, and its electrochemical response to targets can be further enhanced by improving the interfacial properties of its tip. Here, an ultramicroelectrodes (UMEs) modification strategy based on bimetallic single-particle was proposed for the first time. This mesoporous platinum/iridium alloy single-particle (mPtIr SP) interface using micelle-assisted electrodeposition was characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). And the nucleation kinetic progress which can be defined as "oil-in-water-like" electrodeposition was discussed in detail. The high sensitivity (203.86 μA/μM·cm2) and good selectivity for NO detection benefits from the high catalysis of the PtIr alloy and the high mass transfer properties of the porous interface. In particular, this novel UME can real-time monitor NO release from a single MCF-7 cell stimulated by perfluorooctanoic acid (PFOA), providing new ideas for contaminant toxicity assessment, health diagnostics, and disease treatment.

Research Progress on Ni-Based Electrocatalysts for the Electrochemical Reduction of Nitrogen to Ammonia

The electrochemical nitrogen reduction reaction (NRR) to synthesize ammonia (NH3) is considered as a promising method due to its approvable advantages of zero-pollution emission, feasible reaction proceedings, good safety and easy management. The multiple efforts have been devoted to the exploration of earth-abundant-element-based nanomaterials as high-efficiency electrocatalysts for realizing their industrial applications. Among these, the Ni-based nanomaterials is prioritized as an attractive non-noble-metal electrocatalysts for catalyzing NRR because they are earth-abundance and exceedingly easy to synthesize as well as also delivers the potential of high electrocatalytic activity and durability. In this review, after briefly elucidating the underlying mechanisms of NRR during the electrochemical process, we systematically sum up the recent research progress in representative Ni-based electrocatalysts, including monometallic Ni-based nanomaterials, bimetallic Ni-based nanomaterials, polymetallic Ni-based nanomaterials, etc. In particular, we discuss the effects of physicochemical properties, such as phases, crystallinity, morphology, composition, defects, heteroatom doping, and strain engineering, on the comprehensive performance of the abovementioned electrocatalysts, with the aim of establishing the nanostructure-function relationships of the electrocatalysts. In addition, the promising directions of Ni-based electrocatalysts for NRR are also pointed out and highlighted. The generic approach in this review may expand the frontiers of NRR and provides the inspiration for developing high-efficiently Ni-based electrocatalysts.

Nitrogen Reduction Reaction to Ammonia on Transition Metal Carbide Catalysts

The development of a low-cost, energy-efficient, and environmentally friendly alternative to the currently utilized Haber-Bosch process to produce ammonia is of great importance. Ammonia is an essential chemical used in fertilizers and a promising high-density fuel source. The nitrogen reduction reaction (NRR) has been explored intensively as a potential avenue for ammonia production using water as proton source, but to this day a catalyst capable of producing this chemical at high Faradaic efficiency (FE) and commercial yield and rates has not been reported. Here, we investigate the activity of transition metal carbide (TMC) surfaces in the (100) facets of the rocksalt (RS) structure as potential catalysts for the NRR. In this study, we use density functional theory (DFT) to model reaction pathways, estimate stability, assess kinetic barriers, and compare adsorbate energies to determine the overall performance of each TMC surface. For pristine TMC surfaces (with no defects) we find that none of the studied TMCs possess both exergonic adsorption of nitrogen and the capability to selectively protonate nitrogen to form ammonia in the desired aqueous solution. ZrC, however, is shown to be a potential catalyst if used in a non-aqueous electrolyte. To circumvent the endergonic adsorption of nitrogen onto the surface, a carbon vacancy was introduced. This provides a well-defined high coordination active site on the surface. In the presence of a vacancy VC, NbC, and WC showed efficient nitrogen adsorption, selectivity towards ammonia, and a low overpotential (OP). NbC did, however, display an unfeasible kinetic barrier to nitrogen dissociation for ambient-condition purposes, and thus it is suggested for high tempearture/pressure ammonia synthesis. Both WC and VC in their RS (100) structure are promising materials for experimental investigations in aqueous electrolytes, and ZrC could potentially be interesting for non-aqueous electrolytic systems.

Nitrogen Electrocatalysis: Electrolyte Engineering Strategies to Boost Faradaic Efficiency

The electrochemical activation of dinitrogen at ambient temperature and pressure for the synthesis of ammonia has drawn increasing attention. The faradaic efficiency (FE) as well as ammonia yield in the electrochemical synthesis is far from reaching the requirement of industrial-scale production. In aqueous electrolytes, the competing electron-consuming hydrogen evolution reaction (HER) and poor solubility of nitrogen are the two major bottlenecks. As the electrochemical reduction of nitrogen involves proton-coupled electron transfer reaction, rationally engineered electrolytes are required to boost FE and ammonia yield. In this Review, we comprehensively summarize various electrolyte engineering strategies to boost the FE in aqueous and non-aqueous medium and suggest possible approaches to further improve the performance. In aqueous medium, the performance can be improved by altering the electrolyte pH, transport velocity of protons, and water activity. Other strategies involve the use of hybrid and water-in-salt electrolytes, ionic liquids, and non-aqueous electrolytes. Existing aqueous electrolytes are not ideal for industrial-scale production. Suppression of HER and enhanced nitrogen solubility have been observed with hybrid and non-aqueous electrolytes. The engineered electrolytes are very promising though the electrochemical activation has several challenges. The outcome of lithium-mediated nitrogen reduction reaction with engineered non-aqueous electrolyte is highly encouraging.

Bimetallic ruthenium–rhodium particles supported on carbon nanotubes for the hydrophosphinylation of alkenes and alkynes

RuRh bimetallic particles supported on carbon nanotubes were applied to the hydrophosphinylation of alkenes and alkynes. This recyclable system operates under sustainable conditions: low catalyst loading, room temperature and atmospheric pressure.