Electrochemically-driven difunctionalization of the isocyanide and Mumm rearrangement cascade: expeditious synthesis of N-acyl-N-alkyl S-thiocarbamates

We describe the novel electrochemical multicomponent reaction (e-MCR) of readily available isocyanides, thiols and carboxylic acids to form N-substituted S-thiocarbamate derivatives that are found in several biologically active compounds. The effectiveness of the μ-electro flow reactor (μ-EFR) was showcased through significant reduction in electrolyte volume during the reaction, achieving gram-scale production of 4a within a short 12 min residence time using a Pt/Pt flow cell.

Synthesis of Amides via the Amination of Aldehydes with Hydroxylamines Promoted by TBAF·3H2O

A metal-free, mild, and efficient method for the synthesis of amides has been developed from the amination of aldehydes with hydroxylamines promoted by TBAF·3H2O in the presence of KOH. Control experiments showed that the nitrone was the intermediate of this amination. By this method, a series of amides, biologically active compounds bebenil and a COX inhibitor were obtained in moderate to good yields.

Transition-metal-free intramolecular double hydrofunctionalization of alkyne to access 6/7/5-fused heterocyclic skeletons

We describe a novel intramolecular double hydrofunctionalization cyclization of alkyne with nitrogen and oxygen nucleophilic groups to construct valuable 6/7/5-fused heterocyclic products. This post-Groebke-Blackburn-Bienaymé (GBB) reaction introduces a new class of functionalized isocyanides. Transition-metal-free cyclization, broad substrate scope, and high atom economy were some features of the present protocol.

Cyanation with isocyanides: recent advances and perspectives

Cyanation has attracted considerable attention in organic synthesis because nitriles are key structural motifs in numerous important dyes, agrochemicals, natural products and drug molecules. As the fourth generation of cyanating reagents, isocyanides occupy a prominent place in the synthesis of nitriles due to their favorable stability, easy operability and high reactivity. In recent years, three types of cyanation with isocyanides have been established: the cleavage of the C-NC bond of tertiary alkyl isocyanides (Type I), the rearrangement of aryl isocyanides with azides (Type II), and the reductive cyanation of ketones with α-acidic isocyanides (Type III). This review focuses on advances in cyanation with isocyanides with an emphasis on reaction scope, limitations and mechanisms, which could reveal their remarkable value and superiority for accessing various nitriles. In addition, the future development prospects of this specific field are also introduced. We believe that this feature article will serve as a comprehensive tool to navigate cyanation with isocyanides across the vast area of synthetic chemistry.

The Design, Synthesis and Mechanism of Action of Paxlovid, a Protease Inhibitor Drug Combination for the Treatment of COVID-19

The COVID-19 pandemic, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has presented an enormous challenge to health care systems and medicine. As a result of global research efforts aimed at preventing and effectively treating SARS-CoV-2 infection, vaccines with fundamentally new mechanisms of action and some small-molecule antiviral drugs targeting key proteins in the viral cycle have been developed. The most effective small-molecule drug approved to date for the treatment of COVID-19 is PaxlovidTM, which is a combination of two protease inhibitors, nirmatrelvir and ritonavir. Nirmatrelvir is a reversible covalent peptidomimetic inhibitor of the main protease (Mpro) of SARS-CoV-2, which enzyme plays a crucial role in viral reproduction. In this combination, ritonavir serves as a pharmacokinetic enhancer, it irreversibly inhibits the cytochrome CYP3A4 enzyme responsible for the rapid metabolism of nirmatrelvir, thereby increasing the half-life and bioavailability of nirmatrelvir. In this tutorial review, we summarize the development and pharmaceutical chemistry aspects of Paxlovid, covering the evolution of protease inhibitors, the warhead design, synthesis and the mechanism of action of nirmatrelvir, as well as the synthesis of ritonavir and its CYP3A4 inhibition mechanism. The efficacy of Paxlovid to novel virus mutants is also overviewed.

Ugi 5-center-4-component reaction of α-amino aldehydes and its application in synthesis of 2-oxopiperazines

A synthetic route leading to densely functionalized 2-oxopiperazines is presented. The strategy employs a 5-center-4-component variant of Ugi multicomponent reaction followed by a deprotection/cyclization sequence. N-Boc-α-amino aldehydes were used for the first time as carbonyl components in a key Ugi 5-center-4-component reaction (U-5C-4CR). It is shown that the presented synthetic route can lead to rigid, heterocyclic scaffolds, as demonstrated by the synthesis of tetrahydro-2H-pyrazino[1,2-a]pyrazine-3,6,9(4H)-trione β-turn mimetic and derivatives of 1,6-dioxooctahydropyrrolo[1,2-a]pyrazine and 3,8-dioxohexahydro-3H-oxazolo[3,4-a]pyrazine.

Recent developments in the total synthesis of natural products using the Ugi multicomponent reactions as the key strategy

The total syntheses of selected natural products using different versions of the Ugi multicomponent reaction is reviewed on a case-by-case basis. The revision covers the period 2008-2023 and includes detailed descriptions of the synthetic sequences, the use of state-of-the-art chemical reagents and strategies, as well as the advantages and limitations of the transformation and some remedial solutions. Relevant data on the isolation and bioactivity of the different natural targets are also briefly provided. The examples clearly evidence the strategic importance of this transformation and its key role in the modern natural products synthetic chemistry toolbox. This methodology proved to be a valuable means for easily building molecular complexity and efficiently delivering step-economic syntheses even of intricate structures, with a promising future.

Synthesis of Luminescent Indolo[2,1-b]quinazolin-6(12H)-ones via a Sequential Ugi/Iodine-Promoted Cyclization/Staudinger/Aza-Wittig Reaction

A new efficient synthesis of indolo[2,1-b]quinazolin-6(12H)-ones via a sequential Ugi/iodine-promoted cyclization/Staudinger/aza-Wittig reaction was developed. The acid catalyzed three-component reactions of 2-azidobenzaldehydes, 2-[2-(trimethylsilyl)ethynyl]benzenamines (or o-aminoacetophenones), and isocyanides gave Ugi-3CR intermediates, which reacted subsequently with I2/DMSO and triphenylphosphine to produce indolo[2,1-b]quinazolin-6(12H)-ones in good overall yields. The obtained indolo[2,1-b]quinazolin-6(12H)-ones were all colored in bright red or orange. Their luminescent property was studied preliminarily and some of them showed high molar absorption coefficients, strong fluorescence emission intensity, and good absolute light quantum yields.

Synthesis of Pyrrolo[3,4-b]pyridin-5-ones via Ugi-Zhu Reaction and In Vitro-In Silico Studies against Breast Carcinoma

An Ugi-Zhu three-component reaction (UZ-3CR) coupled in a one-pot manner to a cascade process (N-acylation/aza Diels-Alder cycloaddition/decarboxylation/dehydration) was performed to synthesize a series of pyrrolo[3,4-b]pyridin-5-ones in 20% to 92% overall yields using ytterbium triflate as a catalyst, toluene as a solvent, and microwaves as a heat source. The synthesized molecules were evaluated in vitro against breast cancer cell lines MDA-MB-231 and MCF-7, finding that compound 1f, at a concentration of 6.25 μM, exhibited a potential cytotoxic effect. Then, to understand the interactions between synthesized compounds and the main proteins related to the cancer cell lines, docking studies were performed on the serine/threonine kinase 1 (AKT1) and Orexetine type 2 receptor (Ox2R), finding moderate to strong binding energies, which matched accurately with the in vitro results. Additionally, molecular dynamics were performed between proteins related to the studied cell lines and the three best ligands.

Rapid Access to Fused Tetracyclic N-Heterocycles via Amino-to-Alkyl 1,5-Palladium Migration Coupled with Intramolecular C(sp3)-C(sp2) Coupling

An unprecedented route for the preparation of fused tetracyclic N-heterocycles is presented through the palladium-catalyzed cyclization of isocyanides with alkyne-tethered aryl iodides. In this transformation, a novel amino-to-alkyl 1,5-palladium migration/intramolecular C(sp3)-C(sp2) coupling sequence was observed first. More importantly, isocyanide exhibited three roles, serving simultaneously as a C1 synthon, a C1N1 synthon, and the donor of C(sp3) for C(sp3)-C(sp2) coupling, and the reaction was the sole successful example that achieved C(sp3)-H activation of isocyanide.

Accessing indole-isoindole derivatives via palladium-catalyzed [3+2] cyclization of isocyanides with alkynyl imines

A facile protocol for the preparation of indole-isoindole derivatives was developed and proceeds via a palladium-catalyzed [3+2] cyclization of isocyanides with alkynyl imines. In this transformation, the palladium catalyst has a triple role, serving simultaneously as a π acid, a transition-metal catalyst and a hydride ion donor, thus enabling the dual function of isocyanide both as a C1 synthon for cyanation and a C1N1 synthon for imidoylation. Significantly, the reaction is the sole successful example for accessing indole-isoindole derivatives, and will open up new avenues to assemble unique N-heterocycle frameworks. Furthermore, the synthetic value of this protocol is demonstrated in the late-stage modification of physiologically active molecules and in the construction of aggregation-induced emission compounds.

Synthesis of New Polyheterocyclic Pyrrolo[3,4-b]pyridin-5-ones via an Ugi-Zhu/Cascade/Click Strategy

A diversity-oriented synthesis (DOS) of two new polyheterocyclic compounds was performed via an Ugi-Zhu/cascade (N-acylation/aza Diels-Alder cycloaddition/decarboxylation/dehydration)/click strategy, both step-by-step to optimize all involved experimental stages, and in one pot manner to evaluate the scope and sustainability of this polyheterocyclic-focused synthetic strategy. In both ways, the yields were excellent, considering the high number of bonds formed with release of only one carbon dioxide and two molecules of water. The Ugi-Zhu reaction was carried out using the 4-formylbenzonitrile as orthogonal reagent, where the formyl group was first transformed into the pyrrolo[3,4-b]pyridin-5-one core, and then the remaining nitrile group was further converted into two different nitrogen-containing polyheterocycles, both via click-type cycloadditions. The first one used sodium azide to obtain the corresponding 5-substituted-1H-tetrazolyl-pyrrolo[3,4-b]pyridin-5-one, and the second one with dicyandiamide to synthesize the 2,4-diamino-1,3,5-triazine-pyrrolo[3,4-b]pyridin-5-one. Both synthesized compounds may be used for further in vitro and in silico studies because they contain more than two heterocyclic moieties of high interest in medicinal chemistry, as well as in optics due to their high π-conjugation.

Multicomponent Reaction-Assisted Drug Discovery: A Time- and Cost-Effective Green Approach Speeding Up Identification and Optimization of Anticancer Drugs

Multicomponent reactions (MCRs) have emerged as a powerful strategy in synthetic organic chemistry due to their widespread applications in drug discovery and development. MCRs are flexible transformations in which three or more substrates react to form structurally complex products with high atomic efficiency. They are being increasingly appreciated as a highly exploratory and evolutionary tool by the medicinal chemistry community, opening the door to more sustainable, cost-effective and rapid synthesis of biologically active molecules. In recent years, MCR-based synthetic strategies have found extensive application in the field of drug discovery, and several anticancer drugs have been synthesized through MCRs. In this review, we present an overview of representative and recent literature examples documenting different approaches and applications of MCRs in the development of new anticancer drugs.

Stereoselective Synthesis of 12-Tetrazolyl Substituted (E)-5H-Quinazolino[3,2-a]quinazolines via Sequential Ugi-Azide/Staudinger/aza-Wittig/Addition/Ag(I)-Catalyzed Cyclization

A new efficient and stereoselective synthesis of 12-tetrazolyl substituted (E)-5H-quinazolino[3,2-a]quinazolines via sequential Ugi-azide/Staudinger/aza-Wittig/addition/Ag(I)-catalyzed cyclization was developed. The four-component reactions of 2-azidobenzaldehyde, 2-(alkynyl)benzenamine, isocyanide, and trimethylsilyl azide gave Ugi-azide intermediates, which were subsequently treated with triphenylphosphine and isocyanate to produce 12-tetrazolyl substituted (E)-5H-quinazolino[3,2-a]quinazolines in the presence of Ag(I) catalyst and K₂CO₃.

Synthesis of bis-furyl-pyrrolo[3,4-b]pyridin-5-ones via Ugi-Zhu reaction and in vitro activity assays against human SARS-CoV-2 and in silico studies on its main proteins

An Ugi-Zhu three-component reaction (UZ-3CR) coupled in one pot manner to a cascade process (N-acylation/aza Diels-Alder cycloaddition/decarboxylation/dehydration) was performed to synthesize a series of bis-furyl-pyrrolo[3,4-b]pyridin-5-ones in 45 to 82% overall yields using ytterbium triflate as a catalyst, toluene as a solvent, and microwaves as a heat source. The synthesized molecules were evaluated in vitro against human SARS-CoV-2 through a time-of-addition approach, finding that compound 1e, at a concentration of 10.0 μM, exhibited a significant reduction at the initial infection stages, thus showing prophylactic potential. On the other hand, it was found that compound 1d, at the same concentration, was significantly active when applied post-infection, thus exhibiting a therapeutic profile. Moreover, compound 1f showed both, prophylactic and therapeutic activity. Then, to understand interactions between synthesized compounds and the main proteins related to the virus, docking studies were performed on spike-glycoprotein, main-protease, and Nsp3 protein, finding moderate to strong binding energies, matching accurately with the in vitro results. Additionally, a pharmacophore model was computed behind further rational drug design.

2-Benzyl-3-morpholino-7-(thiophen-2-yl)-6-(thiophen-2-ylmethyl)-6,7-dihydro-5H-pyrrolo[3,4-b]pyridin-5-one

The new polyheterocyclic compound 2-benzyl-3-morpholino-7-(thiophen-2-yl)-6-(thiophen-2-ylmethyl)-6,7-dihydro-5H-pyrrolo[3,4-b]pyridin-5-one (1) was synthesized via a one-pot process involving an Ugi-Zhu three-component reaction coupled to a cascade aza-Diels-Alder cycloaddition/N-acylation/decarboxylation/dehydration process, using toluene as the solvent, ytterbium (III) triflate as the Lewis acid catalyst, and microwave-dielectric heating to increase the overall yield by up to 73%, while decreasing the reaction time to less than one hour. Product 1 was fully characterized by its physicochemical properties and using spectroscopic techniques (IR, HRMS and NMR).

Enantioselective Ugi and Ugi-azide reactions catalyzed by anionic stereogenic-at-cobalt(III) complexes

Ugi reactions and related variations are proven to be atom and step-economic strategies for construction of highly valuable peptide-like skeletons and nitrogenous heterocycles. The development of structurally diverse range of novel catalytic systems and the discovery of new approaches to accommodate a broader scope of terminating reagents for asymmetric Ugi four-component reaction is still in high demand. Here, we report a strategy that enables enantioselective Ugi four-component and Ugi-azide reactions employing anionic stereogenic-at-cobalt(III) complexes as catalysts. The key nitrilium intermediates, generated through the nucleophilic addition of isocyanides to the chiral ion-pair which consists of stereogenic-at-cobalt(III) complexes counteranion and a protonated iminium, are trapped by either carboxylic acids or in situ-generated hydrazoic acid, delivering α-acylamino amides and α-aminotetrazoles in good to excellent enantioselectivities (up to 99:1 e.r.).

Structure and Conformation of Novel BODIPY Ugi Adducts

Two novel BODIPY‐Ugi (boron dipyrromethene) adducts exhibit peculiar room temperature (T=20 °C) H‐1 NMR spectra in that several protons located at the aromatic aniline‐type ring are lost in the baseline. This observation revealed the existence of a dynamic conformational process where rotation around the C−N bond is hindered. Variable‐temperature H‐1 and C‐13 NMR spectroscopic analysis confirmed this conclusion; that is, low‐temperature spectra show distinct signals for all four aromatic protons below coalescence, whereas average signals are recorded above coalescence (T=+120 °C). Particularly interesting was the rather large difference in chemical shifts for the ortho protons below coalescence, Δδ=1.45 ppm, which was explained based on DFT computational analysis. Indeed, the calculated lowest‐energy gas‐phase conformation of the BODIPY Ugi adducts locates one half of the aniline‐type ring in the shielding anisotropic cone of the bridge phenyl ring in the BODIPY segment. This is in contrast to the solid‐state conformation established by X‐ray diffraction analysis that shows a nearly parallel arrangement of the aromatic rings, probably induced by crystal packing forces.

Ferrocenyl-bis-(1-(4-benzyl-5-morpholinooxazol-2-yl)-N-(4-(trifluoromethyl)benzyl)methanamine)

The new bis-heterocyclic compound ferrocenyl-bis-(1-(4-benzyl-5-morpholinooxazol-2-yl)-N-(4-(trifluoromethyl)benzyl)methanamine) (1) was synthesized in 73% overall yield in 1.5 hours via a pseudo-repetitive Ugi-Zhu five-component reaction, starting from 1,1′-ferrocenedicarboxaldehyde, 4-(trifluoromethyl)benzylamine, and 2-isocyano-1-morpholino-3-phenylpropan-1-one, in 1:2.1:2.2 proportions, respectively, using scandium(III) triflate as a Lewis-acid catalyst, microwaves as a heat source, and toluene as a solvent. The synthesized compound was characterized by 1D (1H, 13C, and 19F) and 2D (COSY, HSQC, and HMBC) NMR, HRMS, and FT-IR.

Multicomponent Reactions for the Synthesis of Active Pharmaceutical Ingredients

Multicomponent reactions 9i.e., those that engage three or more starting materials to form a product that contains significant fragments of all of them), have been widely employed in the construction of compound libraries, especially in the context of diversity-oriented synthesis. While relatively less exploited, their use in target-oriented synthesis offers significant advantages in terms of synthetic efficiency. This review provides a critical summary of the use of multicomponent reactions for the preparation of active pharmaceutical principles.

Sulfonium and Selenonium Salts as Noncovalent Organocatalysts for the Multicomponent Groebke-Blackburn-Bienaymé Reaction

Sulfonium and selenonium salts, represented by S-aryl dibenzothiophenium and Se-aryl dibenzoselenophenium triflates, were found to exhibit remarkable catalytic activity in the model Groebke-Blackburn-Bienaymé reaction. Kinetic analysis and density functional theory (DFT) calculations indicated that their catalytic effect is induced by the ligation of the reaction substrates to the σ-holes on the S or Se atom of the cations. The experimental data indicated that although 10-fold excess of the chloride totally inhibits the catalytic activity of the sulfonium salts, the selenonium salt remains catalytically active, which can be explained by the experimentally found lower binding constant of the selenonium derivative to chloride in comparison with the sulfonium analogue. Both types of salts exhibit lower catalytic activity in the model reaction than dibenziodolium species.

N-Oxide-Induced Ugi Reaction: A Rapid Access to Quinoline-C2-amino Amides via Deoxygenative C(sp2)-H Functionalization

A logic-based replacement of the carboxylic acid component of the Ugi reaction by quinoline N-oxides has been developed. In this approach, the carboxylic isostere, quinoline N-oxide, plays a vital role by shifting the equilibria toward the product side with irreversible addition onto the C2-position of the N-oxide. Thus, aldehydes react with amines, isocyanides, and quinoline N-oxides to furnish quinoline four-component Ugi adducts. The unique reactivity of N-oxides with Ugi components opens an efficient synthetic route for the preparation of biologically active compounds.

Ligand centered redox enabled sustainable synthesis of triazines and pyrimidines using a zinc-stabilized azo-anion radical catalyst

Herein, we report ligand-centered redox controlled Zn(II)-catalyzed multicomponent approaches for synthesizing pyrimidines and triazines. Taking advantage of the ligand-centered redox events and using a well-defined Zn(II)-catalyst (1a) bearing (E)-2-((4-chlorophenyl)diazenyl)-1,10-phenanthroline (L1a) as the redox-active ligand, a wide variety of substituted pyrimidines and triazines were prepared via dehydrogenative alcohol functionalization reactions. Pyrimidines were prepared via two pathways: (i) dehydrogenative coupling of primary and secondary alcohols with amidines and (ii) dehydrogenative coupling of primary alcohols with alkynes and amidines. Triazines were prepared via dehydrogenative coupling of alcohols and amidines. Catalyst 1a is well tolerant to a wide range of substrates yielding the desired pyrimidines and triazines in moderate to good isolated yields. A series of control reactions were performed to predict the plausible mechanism, suggesting that the active participation of the ligand-centered redox events enables the Zn(II)-complex 1a to act as an efficient catalyst for synthesizing these N-heterocycles. Electron transfer processes occur at the azo-aromatic ligand throughout the catalytic reaction, and the Zn(II)-center serves only as a template.

Multicomponent reactions and photo/electrochemistry join forces: atom economy meets energy efficiency

Visible-light photoredox catalysis has been regarded as an extremely powerful tool in organic chemistry, bringing the spotlight back to radical processes. The versatility of photocatalyzed reactions has already been demonstrated to be effective in providing alternative routes for cross-coupling as well as multicomponent reactions. The photocatalyst allows the generation of high-energy intermediates through light irradiation rather than using highly reactive reagents or harsh reaction conditions. In a similar vein, organic electrochemistry has experienced a fruitful renaissance as a tool for generating reactive intermediates without the need for any catalyst. Such milder approaches pose the basis toward higher selectivity and broader applicability. In photocatalyzed and electrochemical multicomponent reactions, the generation of the radical species acts as a starter of the cascade of events. This allows for diverse reactivity and the use of reagents is usually not covered by classical methods. Owing to the availability of cheaper and more standardized photo- and electrochemical reactors, as well as easily scalable flow-setups, it is not surprising that these two fields have become areas of increased research interest. Keeping these in view, this review is aimed at providing an overview of the synthetic approaches in the design of MCRs involving photoredox catalysis and/or electrochemical activation as a crucial step with particular focus on the choice of the difunctionalized reagent.

Diaryliodoniums as Hybrid Hydrogen- and Halogen-Bond-Donating Organocatalysts for the Groebke-Blackburn-Bienaymé Reaction

Dibenziodolium and diphenyliodonium triflates display high catalytic activity for the multicomponent reaction that leads to a series of imidazopyridines. Density functional theory (DFT) calculations indicate that both the salts can play the role of hybrid hydrogen- and halogen-bond-donating organocatalysts, which electrophilically activate the carbonyl and imine groups during the reaction process. The ortho-H atoms in the vicinal position to the I atom play a dual role: forming additional noncovalent bonds with the ligated substrate and increasing the maximum electrostatic potential on the σ-hole at the iodine atom owing to the effects of polarization. Dibenziodolium triflate exhibits higher catalytic activity, and the results obtained from ¹H nuclear magnetic resonance (NMR) titrations, in conjunction with those from DFT calculations, indicate that this could be explained in terms of the additional energy required for the rotation of the phenyl ring in the diphenyliodonium cation during ligation of the substrate.

Catalytic Metal-Enabled Romance of Isocyanides for Use as “C1N1” Synthons in Cyclization: Beyond Radical Chemistry

Cyclizative reactions have attracted considerable attentions in organic synthesis with regard to the high atom economy and synthetic efficiency towards cyclic architectures. Especially, isocyanide-based cyclizations have proven to be a...