Absorption and desorption of hydrogen in Ti1.02Cr1.1Mn0.3Fe0.6RE0.03: experiments, characterization and analytical interpretation using statistical physics treatment

Enhanced hydrogen storage properties of ZrTiVAl1-x Fe x high-entropy alloys by modifying the Fe content

Lightweight ZrTiVAl high-entropy alloys have shown great potential as a hydrogen storage material due to their appreciable capacity, easy activation, and fast hydrogenation rates. In this study, transition metal Fe was used to improve the hydrogen storage properties of the equimolar ZrTiVAl alloy, and ZrTiVAl1-x Fe x (x = 0, 0.2, 0.4, 0.6, 0.8, 1) alloys were prepared to investigate the microstructure evolution and hydrogen storage properties. The results show that the ZrTiVAl1-x Fe x alloys are composed of a C14 Laves phase and Ti-rich HCP phase. With Fe substituting Al, the fraction of the C14 Laves phase increases and that of the HCP phase decreases. Besides, the interdendritic area fraction reaches the maximum when the Fe ratio is 0.2. The element V transferred to the C14 Laves phase from the HCP phase, which is caused by the strong affinity between V and Fe. The ZrTiVAl1-x Fe x alloys show enhanced hydrogenation kinetics and capacities. Notably, the ZrTiVFe alloy can reversely absorb 1.58 wt% hydrogen even at room temperature under 1 MPa H2. The reduced interdendritic phase is beneficial to shorten the H atom diffusion distance, thus improving the hydrogenation rates. Both the transfer of the hydrogen-absorbing element V to the C14 Laves phase and the increased fraction of the C14 Laves phase lead to the increase of hydrogen storage capacity with the addition of Fe. Moreover, the increased Fe content leads to an increase of average valence electron concentration (VEC), where a larger VEC destabilizes the hydrides, and the desorption temperature of ZrTiVAl1-x Fe x hydride decreases significantly.

Adsorption of CO2 on ZSM-5 Zeolite: Analytical Investigation via a Multilayer Statistical Physics Model

In this paper, a synthesized zeolite (ZSM-5) is used as an adsorbent to analyze the adsorption phenomenon of carbon dioxide. This investigation, based on the statistical physics treatment, applied the multilayer model with saturation to understand the CO2 adsorption on four samples, namely M-ZSM-5 (M = Na+, Mg2+, Zn2+, La3+), at various temperatures T = 0 °C, 30 °C and 60 °C. The modeling results indicated that CO2 adsorption occurred via a non-parallel orientation on the ZSM-5 surface. The CO2 adsorption capacities varied from 26.14 to 28.65 cm3/g for Na-ZSM-5, from 25.82 to 27.97 cm3/g for Mg-ZSM-5, from 54.82 to 68.63 cm3/g for La-ZSM-5 and from 56.53 to 74.72 cm3/g for Zn-ZSM-5. Thus, Zn-ZSM-5 exhibits the highest adsorption amount. The analysis of the adsorption energies shows that the adsorption of CO2 on ZSM-5 zeolite is a physisorption phenomenon that could be controlled thanks to the energy parameters obtained via the numerical findings using the multilayer statistical model. Finally, the distribution of site energy was determined to confirm the physical character of the interactions between adsorbate/adsorbent and the heterogeneity of the zeolite surface.