Red, green, and blue light-emitting carbon dots prepared from o-phenylenediamine

A fluorescence-enhanced method specific for furfural determination in Chinese Baijiu based on luminescent carbon dots and direct surface reaction

Detecting the furfural concentration in Baijiu can be used to assess the quality of Baijiu, allowing for the optimization of processing techniques and the enhancement of overall quality. In this paper, a fluorescence-enhanced method based on carbon dots (o-CDs) is developed for the furfural determination in Chinese Baijiu. In an environment full-filled with ·SO4- and ·OH, furfural undergone a direct surface reaction with the ortho-diamino groups at o-CDs. The created furan-based imidazole increased the surface electron density, leading an emission enhancement and color changes from orange to green. Thereby, a linear fluorescence response of o-CDs-TA to furfural is established in water with a detection limit of 30.5 nM. Finally, after ethanol correction it is used to determine furfural in Chinese Baijiu with high precision and reproducibility, providing a new strategy with low-cost and high sensitivity. In particular, the idea of covalently connecting target molecule to the CDs surface via the assistance of free radical opens a new avenue to merge the nanoscale and molecular realms through implementing chemical role into carbon nanostructures.

Formation and Fluorescent Mechanism of Multiple Color Emissive Carbon Dots from o-Phenylenediamine

Carbon dots (CDs) have received considerable attention in many application areas owing to their unique optical properties and potential applications; however, the fluorescent mechanism is an obstacle to their applications. Herein, three-color emissive CDs are prepared from single o-phenylenediamine (oPD) by regulating the ratio of ethanol and dimethylformamide (DMF). Fluorescent mechanism of these CDs is proposed as molecular state fluorescence. Reaction intermediates are identified using liquid chromatrography-mass spectroscopy (LC-MS) and 1H nuclear magnetic resonance (NMR) spectra. 1H-Benzo[d]imidazole (BI), 2,3-diaminophenazine (DAP), and 5,14-dihydroquinoxalino[2,3-b] phenazine (DHQP) are proposed to be the fluorophores of blue, green, and red emissive CDs by comparing their optical properties. As per the LC-MS and 1H-NMR analysis, DHQP with red emission tends to form from DAP and oPD in pure ethanol. By adding DMF, BI formation is enhanced and DHQP formation is suppressed. The prepared CDs exhibit green emission with DAP. When the DMF amount is >50%, BI formation is considerably promoted, resulting in DAP formation being suppressed. BI with blue emission then turns into the fluorophore of CDs. This result provides us an improved understanding of the fluorescent mechanism of oPD-based CDs, which guides us in designing the structure and optical properties of CDs.

A facile fluorescence method for the effective detection of ampicillin using antioxidant carbon dots with specific fluorescent response to ˙OH

Monitoring methods for beta-lactam (β-lactam) antibiotics, especially for ampicillin (AMP), with simple operation and sensitivity for realtime applications are highly required. To address this need, antioxidant carbon dots (E-CDs) with excellent fluorescence properties were synthesized using citric acid and ethylenediamine as raw materials. With a quantum yield of 81.97%, E-CDs exhibited a specific and sensitive response to ˙OH. The quenched fluorescence of E-CDs by the formed ˙OH could be restored through a competition reaction with AMP. Leveraging the signal-quenching strategy of E-CDs, H2O2, and Fe2+, a fluorescence signal-on strategy was developed using AMP as the fluorescence recovery agent for the sensitive detection of AMP. The mechanism of the quenching of E-CDs by ˙OH was attributed to the damaging effect of ˙OH on E-CDs. Under optimal conditions, the detection limit of this method for AMP was determined to be 0.38 μg mL-1. This method was successful in drug quality control and the spiked detection of AMP in lake water, milk, and sea cucumber, presenting a viable option for convenient and rapid antibiotic monitoring methods.

Orange-Red-Emitting Carbon Dots for Bilirubin Detection and Its Antibacterial Activity Against Escherichia coli and Staphylococcus aureus

In this study, orange-red-emitting carbon dots (OR-CDs) were prepared from p-phenylenediamine (p-PDA) and urea as starting precursors through the hydrothermal method. The OR-CDs exhibited bright orange-red fluorescence at 618 nm when excited at 480 nm. The obtained OR-CDs exhibited stable photophysical properties under different physiological conditions. The unique photophysical property of OR-CDs were then utilized for fluorometric determination of bilirubin. The fluorometric assay revealed that the fluorescence intensity of OR-CDs is gradually quenched upon the addition of bilirubin (1-20 μM). The mechanism of fluorescence quenching was evaluated by steady-state fluorescence analysis and time-correlated single photon counting measurements. The OR-CDs showed good selectivity and sensitivity toward bilirubin over other common interfering biomolecules. The present fluorometric assay showed a linear response toward bilirubin between 1 and 10 μM with a limit of detection of 4.80 nM. Further, a fluorescence test cotton swab-based detection probe has been successfully developed by incorporating OR-CDs for the point-of-care detection of bilirubin in biofluids. Furthermore, a light-emitting diode light that emits orange-red light was prepared by embedding the OR-CDs within the poly(vinyl alcohol) polymer matrix. Moreover, the antibacterial activity of OR-CDs was tested against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. The antibacterial efficacy of OR-CDs was demonstrated by various mechanisms, such as reactive oxygen species generation, destruction of cell structure, chemical binding to membrane, and surface wrapping. Interestingly, the survival assay against L929 fibroblast cells exhibits favorable biocompatibility and bioimaging.

Synthesis and post-synthesis strategies for polychromatic carbon dots toward unique and tunable multicolor photoluminescence and associated emission mechanism

Carbon dots (CDs) with unique and tunable multicolor photoluminescence (PL) emission has attracted tremendous attention in the past few years due to their potential multifaceted application, specially in the biomedical and optoelectronic fields. There has been extensive deliberation and efforts to engineer the synthesis or post synthesis approach to obtain multicolor-emissive CDs and tune their optical properties toward longer wavelength. This review mainly focuses on the advancement of strategies for synthesis and post-synthesis techniques of CDs toward tunable multicolor emission. Based on the above discussion to achieve desired goals, several synthesis strategies (selection of proper benzenoid precursor, acid/base treatment of biomass, optimization of reaction conditions, optimization of the reagents, solvent engineering, acid strength regulation, reaction temperature regulation, chemical doping) and various post synthesis strategies (column chromatographic separation or purification, solvatochromism, pH variation, surface functionalization, concentration variation) have been reviewed. Although numerous research articles have been published on the synthesis of multicolor CDs for multifaceted application, there is still a lack of a concise review article focusing on systematic synthesis/post synthesis strategies with PL mechanism elucidation. Thus, we focused on providing a comprehensive overview of the state-of-the-art advances on the strategies for the preparation of polychromatic CDs with tunable emission and elucidating their emission mechanism.

Synthetic strategies, properties and sensing application of multicolor carbon dots: recent advances and future challenges

Recently, carbon dots (CDs) as newly developed carbon-based nanomaterials due to advantages such as excellent photostability and easy surface functionalization have generated wide application prospects in fields such as biological imaging and chemical sensing. The multicolor emission carbon dots (M-CDs) were acquired through the selection of different carbon source precursors, change of synthesis conditions and synthesis environment. Therefore, the aim of this review is to summarize the latest research progress in polychromatic CDs from the perspectives of synthesis strategies, luminescent mechanisms, luminescent properties and applications. This review focuses on how to prepare MCDs by changing raw materials and synthesis conditions such as reaction temperature, synthesis time, synthesis pH, and synthesis solvent. This review also presents the optical properties of MCDs, concentration effects, solvent effects, pH effects, elemental doping, and surface passivation on them, as well as their creative applications in the field of sensing applications. It is anticipated that this review will serve as a guide for the development of multifunctional M-CDs and inspire future research on controllable design and preparation of M-CDs.

Progress in drug delivery and diagnostic applications of carbon dots: a systematic review

Carbon dots (CDs), which have particle size of less than 10 nm, are carbon-based nanomaterials that are used in a wide range of applications in the area of novel drug delivery in cancer, ocular diseases, infectious diseases, and brain disorders. CDs are biocompatible, eco-friendly, easy to synthesize, and less toxic with excellent chemical inertness, which makes them very good nanocarrier system to deliver multi-functional drugs effectively. A huge number of researchers worldwide are working on CDs-based drug delivery systems to evaluate their versatility and efficacy in the field of pharmaceuticals. As a result, there is a tremendous increase in our understanding of the physicochemical properties, diagnostic and drug delivery aspects of CDs, which consequently has led us to design and develop CDs-based theranostic system for the treatment of multiple disorders. In this review, we aim to summarize the advances in application of CDs as nanocarrier including gene delivery, vaccine delivery and antiviral delivery, that has been carried out in the last 5 years.

Role of Noncovalent Interactions in N,P-Functionalized Luminescent Carbon Dots for Ultrasensitive Detection of Moisture in D2O: Boosting Visible-NIR Light Sensitivity

It is highly desirable to design cost-efficient and eco-friendly fluorometric sensors that can efficiently detect water contamination in D₂O and other expensive organic solvents. Herein, we have synthesized N,P-codoped carbon dots (N,P-CDs) from o-phenylene diamine (o-PDA) and H₃PO₄ through the bottom-up carbonization method. Heteroatom co-doping increases the absorption cross section in the visible-NIR range, followed by the formation of stable emissive states in longer-wavelength regions. We have critically investigated the noncovalent interactions (especially H-bonding interactions) of various surface functional groups with surrounding solvent media through a detailed structure-property correlation. Based on the sensitivity of noncovalent H-bonding interactions to the stability of longer-wavelength emissive domains, we have utilized these N,P-CDs as cost-effective fluorometric sensors of water/moisture contamination in D₂O especially under visible-NIR light; the optical sensitivity reaches up to 0.1 volume (%) level. The detailed sensing mechanism has been further supported by a computational study through a simple visualization approach by mapping and analyzing all possible noncovalent interactions between the CDs and the solvent medium.

Structural, optical, and bioimaging characterization of carbon quantum dots solvothermally synthesized from o-phenylenediamine

Carbon quantum dots as a novel type of carbon nanomaterials have attracted the attention of many researchers because of their unique optical, antibacterial, and anticancer properties as well as their biocompatibility. In this study, for the first time, carbon quantum dots were prepared from o-phenylenediamine dissolved in toluene by a solvothermal route. Subsequently, the prepared carbon quantum dots were encapsulated into polyurethane films by a swelling-encapsulation-shrink method. Analyses of the results obtained by different characterization methods (AFM, TEM, EDS, FTIR, photoluminescence, and EPR) indicate the significant influence of the precursor on structural, chemical, and optical properties. Antibacterial and cytotoxicity tests showed that these dots did not have any antibacterial potential, because of the low extent of reactive oxygen species production, and showed low dark cytotoxicity. By investigating the cellular uptake, it was established that these dots penetrated the HeLa cells and could be used as probes for bioimaging.

The Formation Process and Mechanism of Carbon Dots Prepared from Aromatic Compounds as Precursors: A Review

Fluorescent carbon dots are a novel type of nanomaterial. Due to their excellent optical properties, they have extensive application prospects in many fields. Studying the formation process and fluorescence mechanism of CDs will assist scientists in understanding the synthesis of CDs and guide more profound applications. Due to their conjugated structures, aromatic compounds have been continuously used to synthesize CDs, with emissions ranging from blue to NIR. There is a lack of a systematic summary of the formation process and fluorescence mechanism of aromatic precursors to form CDs. In this review, the formation process of CDs is first categorized into three main classes according to the precursor types of aromatic compounds: amines, phenols, and polycyclics. And then, the fluorescence mechanism of CDs synthesized from aromatic compounds is summarized. The challenges and prospects are proposed in the last section.

Fabrication of Carbon-Based Quantum Dots via a "Bottom-Up" Approach: Topology, Chirality, and Free Radical Processes in "Building Blocks"

The discovery of carbon-based quantum dots (CQDs) has allowed opportunities for fluorescence bioimaging, tumor diagnosis and treatment, and photo-/electro-catalysis. Nevertheless, in the existing reviews related to the "bottom-up" approaches, attention is mainly paid to the applications of CQDs but not the formation mechanism of CQDs, which mainly derived from the high complexities during the synthesis of CQDs. Among the various synthetic methods, using small molecules as "building blocks", the development of a "bottom-up" approach has promoted the structural design, modulation of the photoluminescence properties, and control of the interfacial properties of CQDs. On the other hand, many works have demonstrated the "building blocks"-dependent properties of CQDs. In this review, from one of the most important variables, the relationships among intrinsic properties of "building blocks" and photoluminescence properties of CQDs are summarized. The topology, chirality, and free radical process are selected as descriptors for the intrinsic properties of "building blocks". This review focuses on the induction and summary of recent research results from the "bottom-up" process. Moreover, several empirical rules pertaining thereto are also proposed.

The Emerging Development of Multicolor Carbon Dots

As a relatively new type of fluorescent carbon-based nanomaterials, multicolor carbon dots (MCDs) have attracted much attention because of their excellent biocompatibility, tunable photoluminescence (PL), high quantum yield, and unique electronic and physicochemical properties. The multicolor emission characteristics of carbon dots (CDs) obviously depend on the carbon source precursor, reaction conditions, and reaction environment, which directly or indirectly determines the multicolor emission characteristics of CDs. Therefore, this review is the first systematic classification and summary of multiple regulation methods of synthetic MCDs and reviews the recent research progress in the synthesis of MCDs from a variety of precursor materials such as aromatic molecules, small organic molecules, and natural biomass, focusing on how different regulation methods produce corresponding MCDs. This review also introduces the innovative applications of MCDs in the fields of biological imaging, light-emitting diodes (LEDs), sensing, and anti-counterfeiting due to their excellent PL properties. It is hoped that by selecting appropriate adjustment methods, this review can inspire and guide the future research on the design of tailored MCDs, and provide corresponding help for the development of multifunctional MCDs.

Multiplex heteroatoms doped carbon nano dots with enhanced catalytic reduction of ionic dyes and QR code security label for anti-spurious applications

Herein, a simple hydrothermal approach was used to make multiplex heteroatoms doped carbon dots from Tinospora cordifolia miers plant extract. Their ability to the catalytic activity of dyes and anti-spurious applications was evaluated. The formation of NBCNDs and source of (T. cordifolia miers) study the optical properties, and functional groups are investigated using UV-Visible spectroscopy and FT-IR techniques. The synthesized NBCNDs structure and elemental compositions were examined via HR-TEM, XRD, and XPS, respectively. According to the HRTEM images, the average particle size of the NBCNDs was around 4.3± 1 nm, with d-spacing of 0.19 nm. The obtained NBCNDs were exposed under 395 nm UV light to emit bluish-green tuneable fluorescence with QY (quantum yield) of 23.7%. The prepared NBCNDs as a potential catalyst for the AYR and CV dye reduction process using freshly prepared NaBH₄, with determined rate constant values at 0.1220 and 0.1521 min^-1, respectively. Lastly, we constructed a quick response (QR) code security label for anti-spurious applications using stencil techniques. The "confidential info" was encrypted using a QR code digital system, and the decryption was read using a smartphone under 365 nm light irradiation.

Inner-filter Effect Induced Fluorescence Quenching of Carbon Dots for Cr(VI) Detection with High Sensitivity

Carbon dots (CDs) were used to develop a sensitive sensing technique for detecting Cr(VI). CDs were made using a hydrothermal technique from citric acid and glutamic acid. These prepared CDs emitted blue fluorescence under excitation of 350 nm (λ_em = 420 nm), and the fluorescence quantum yield was 48.41%. Transmission electron microscope was used to examine the morphology of the CDs, which had an average size of 2.21 ± 0.39 nm. The elementary composition and bonding structure of the CDs were conducted by XPS and FT-IR spectrum. Cr(VI) quenched the fluorescence of CDs through a static quenching effect and an inner filter effect, allowing Cr(VI) to be detected quantitatively. This approach was used to detect Cr(VI) in two samples of water, with the findings demonstrating that it is reliable and accurate. The fluorescence intensity change was linearly related to the concentration of Cr(VI) in the range from 0.5 to 400 μM, with the detection limit being 0.10 μM. This approach has the virtues of wide detection range, low cost and fast response. The strategy has a great application prospect for detecting Cr(VI) in practical samples.

Fluorescence sensing by carbon nanoparticles

Sensing is one of the most important fields in which chemists, engineers and other scientists are involved to realize sensoristic devices that can detect different analytes, both chemicals and biologicals. In this context, fluorescence sensing paves the way for the realization of smart sensoristic devices due to the possibility to detect the target analyte via a change in colour or emission. Recently (since 2006), carbon nanoparticles, which are a "new class" of nanostructures based on carbon atoms, have been widely used in sensing applications due to their intriguing optical properties. The scientific literature on this topic started from 2006 and a progressive increase in the corresponding number of publications has been observed. This review summarises the application of carbon nanoparticles in the sensing field, focusing on chemical and ion sensing.

Application of high-efficiency green fluorescent carbon dots prepared by acid catalysis in multicolour LEDs

Acidic reagents play an important role in the preparation of carbon dots (CDs). Therefore, we prepared efficient green fluorescent CDs by potassium bisulfate, acetic acid and hydrochloric acid catalysis and discussed why the acid catalyst induced a fluorescence redshift and improved the quantum yield of the CDs. Furthermore, the concentration-dependent photoluminescence behaviour of the CDs was characterized. CD/PVA composites emitting green to yellow light were obtained by exploiting the fluorescence tunability of CDs. Based on different light-emitting diode substrates, green, yellow and white light-emitting diodes with excellent performance were prepared.

Green fluorescent CDs prepared by acid catalysis with m-phenylenediamine showed concentration dependent fluorescence. Green, yellow and white LEDs were prepared according to the concentration dependent fluorescence characteristics of CDs.