Determination of chloropropanol with an imprinted electrochemical sensor based on multi-walled carbon nanotubes/metal-organic framework composites

Ultra-sensitive detection of 4-chloro-2-methylphenoxyacetic acid herbicide using a porous Co-1,4-benzenedicarboxylate /montmorillonite nanocomposite sensor

The detection of 4-chloro-2-methylphenoxyacetic acid (CMPA) herbicide is crucial due to the potential health risks linked to exposure through drinking water, air, and food, which may adversely affect liver and kidney functions. To address this environmental concern and promote sustainable agriculture, a sensitive carbon paste sensor incorporating a composite material was developed. The composite sensor is based on porous cobalt-1,4-benzenedicarboxylate metal-organic framework and exfoliated montmorillonite nanolayers (Co-OF/MMt). This sensor enables the voltammetric detection of CMPA in real soil samples using linear sweep adsorptive anodic stripping voltammetry (LS-AdASV), facilitating early and accurate monitoring of herbicide levels. The Co-OF/MMt nanocomposite was synthesized via a hydrothermal method involving the precipitation of Co-OF in the presence of MMt. Comprehensive characterization of the synthesized materials was carried out using Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), SEM-Energy dispersive X-ray spectroscopy (SEM-EDX) and surface area analysis (BET). The resulting modified carbon paste sensor, utilizing 1.0% Co-OF/MMt nanocomposite, exhibited superior electrochemical properties compared with the bare carbon paste sensor, possessing an electroactive surface area of 1004.1 m2/g with a minimal resistivity (Rct) of 330 Ω. Under standard operating conditions, the developed sensor demonstrated detection limits of 0.03 nM and 0.1 nM across two broad linear ranges (0.03 to 0.10 nM - 0.10 to 1.0 nM) and (0.1 to 1.0 nM - 1.0 to 7.0 nM), respectively, for CMPA determination in both bulk and soil samples. These results pointed out the promising electrochemical modified sensor for the direct and simple detection of certain herbicides in environmental matrices, without the need for sample pretreatment steps. This capability supports sustainable development goals by enhancing effective environmental monitoring.

CTAC Self-Assembled Alkylated β-Cyclodextrin Loaded onto Functionalized MWCNTs Electrochemical Sensor for NP Detection

Nonylphenol (NP) is an important fine chemical raw material and intermediate that is widely utilized in industry and may be distributed in aquatic ecosystems. Following its entry into the food and water cycles, it can subsequently enter the human body and potentially harm the human reproductive system. For the purpose of monitoring NP in water, it is thus essential to build a straightforward, affordable, and robust electrochemical sensor. Based on a two-step chemical modification proceeding and an electrostatic self-assembly effect, a double-modified β-cyclodextrin functionalized multiwalled carbon nanotube sensor (HE-β-CD-CTAC/F-MWCNTs) has been successfully constructed. It incorporates the excellent host-guest interaction ability of β-cyclodextrin and the high chemical activity of cetyltrimethylammonium chloride (CTAC), and the carbon nanotubes have an enormous particular surface area and strong electrical conductivity. The electrochemical oxidation reaction of NP with the sensor is controlled by a surface adsorption process of equal numbers of protons and electrons. In accordance with the optimized experimental parameters, the limit of detection (LOD) for the sensor is 0.13 μM, and it responds linearly to NP in the concentration range of 1-200 μM. Meanwhile, the sensor has excellent repeatability, stability, and immunity to interference. For the detection of NP in real water samples, the sensor also showed an excellent recovery rate (92.8%-98.5%) and relative standard deviation (1.16%-3.26%).

A comprehensive review of chloropropanol analytical method in the context of food safety

Chloropropanols are among the major food contaminants, and quantifying their content in food is a key food-safety issue. In response to the demand for highly sensitive and selective analysis, the scientific community is committed to continuous innovation and optimization of various analytical techniques. This paper comprehensively reviews the latest developments in chloropropanol analysis technologies and systematically compares and analyzes the working principles, application conditions, advantages, and challenges of these methods. Gas chromatography-mass spectrometry is the preferred choice for chloropropanol analysis in complex sample matrices owing to its high resolution, sensitivity, and accuracy. Electrochemical methods provide strong support for the real-time monitoring of chloropropanols because of their high selectivity and sensitivity towards electrochemically active molecules. Other techniques offer innovative solutions for the rapid and accurate analysis of chloropropanol at different levels. Finally, innovative directions for the development of chloropropanol analysis methods for food safety are highlighted.

A low-cost voltammetric sensor based on multi-walled carbon nanotubes for highly sensitive and accurate determination of nanomolar levels of the anticancer drug Ribociclib in bulk and biological fluids

In this study, we present the development and comprehensive characterization of the first electrochemical sensor utilizing multi-walled carbon nanotubes (MWCNTs) for the sensitive and precise detection of Ribociclib (RIBO), an important anticancer drug. The sensor underwent systematic optimization, focusing on critical parameters such as pH, deposition potential, and cumulative time to enhance its electrocatalytic activity and expand the linear range for RIBO determination. The MWCNTs/GCE sensor exhibited excellent reproducibility and repeatability, ensuring reliable and consistent results. The applicability and feasibility of the sensor for real sample analysis were extensively evaluated by analyzing human serum, urine, and tablet samples using the standard addition method. The obtained percent recovery values demonstrated the sensor's exceptional accuracy and precision. Furthermore, interference studies revealed the sensor's remarkable selectivity, with minimal impact from common interfering substances. The developed sensor displayed a wide linear range of 0.01 μM to 5.0 μM, with a limit of detection (LOD) and limit of quantification (LOQ) calculated to be 0.69 nM and 2.31 nM, respectively, affirming its high sensitivity for detecting low RIBO concentrations. The MWCNTs/GCE sensor demonstrates substantial promise for diverse practical applications with its simplicity, cost-effectiveness, and excellent analytical performance.

Recent advances in metal-organic framework/carbon nanotube nanocomposites for developing analytical applications

Nanoscience shows promise for scientific advancement in many sectors, such as biology, energy, materials, environment, and manufacturing. Nanocomposites are mixtures of two or more materials, one of which is nanosized particles. The composites are expected to show combined features resulting in general enhancements in their physical and chemical properties. Metal-organic frameworks (MOFs) are coordination polymers that have attracted attention from researchers in recent years due to their porosity and controllable functionality. Another example of interesting nanomaterials is carbon nanotubes (CNTs) which are also known for their mechanical and thermal properties. Incorporation of both these materials into a nanocomposite has shown an enhancement in properties and conquered challenges in the defects of construction. This mini-review sheds light on the recent synthetic approaches and characterization of MOF-CNT nanocomposites in order to access porous selective nanocomposites that can improve analyte detection in environmental matrixes and biological systems. A summary of the chemical composition of nanocomposites, analytes in the target, and analytical techniques used is provided.

Facile Synthesis of 3D Printed Tailored Electrode for 3-Monochloropropane-1,2-Diol (3-MCPD) Sensing

Additive manufacturing (AM) has allowed enormous advancement in technology and material development; thus, it requires attention in developing functionalized printed materials. AM can assist in efficiently manufacturing complex tailored electrodes for electrochemical sensing in the food industry. Herein, we used a commercial fused deposition modeling (FDM) filament of acrylonitrile butadiene styrene (ABS) for FDM 3D printing of a self-designed electrode with minimal time and cost compared to a commercial electrode. A graphene-based ABS conductive filament (ABS-G) was used to fabricate the conductive electrode in a dual-nozzle FDM 3D printer. The electrochemically conductive 3D printed electrode was characterized using cyclic voltammetry and tested against standard 3-monochloropropane-1,2-diol (3-MCPD) with known concentrations using an amperometric detection method. Results showed a basis for promising application to detect and quantify 3-MCPD, a food contaminant known for its carcinogenic potential. The fabrication of functionalized 3D printed polymer electrodes paves way for the development of complete 3D printable electrochemical sensors. Under optimal conditions, this newly synthesized electrochemical sensor exhibited sensitivity with a linear response range from 6.61 × 10-4 to 2.30 × 10-3 µg/mL with an estimated limit of detection of 3.30 × 10-4 µg/mL against 3-MCPD.

Customizable molecular recognition: advancements in design, synthesis, and application of molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are unlocking the door to synthetic materials that are capable of molecular recognition.

Present and Perspectives of Photoactive Porous Composites Based on Semiconductor Nanocrystals and Metal-Organic Frameworks

This review focuses on the recent developments in synthesis, properties, and applications of a relatively new family of photoactive porous composites, integrated by metal halide perovskite (MHP) nanocrystals and metal-organic frameworks (MOFs). The synergy between the two systems has led to materials (MHP@MOF composites) with new functionalities along with improved properties and phase stability, thus broadening their applications in multiple areas of research such as sensing, light-harvesting solar cells, light-emitting device technology, encryption, and photocatalysis. The state of the art, recent progress, and most promising routes for future research on these photoactive porous composites are presented in the end.

A molecularly imprinted polymer based on MOF and deep eutectic solvent for selective recognition and adsorption of bovine hemoglobin

In this study, a novel kind of imprinted polymers based on metal-organic frameworks (MOF@DES-MIPs) was prepared, using bovine hemoglobin (BHb) as template molecules and deep eutectic solvents (DES) as functional monomers for selective recognition and adsorption of BHb. MOF were used as the substrates to improve the accessibility of imprinted sites and DES as the functional monomers to produce different forces for BHb to help the formation of imprinted sites. Imprinted polymer films were taken to provide analyte selectivity. The MOF@DES-MIPs prepared were characterized and evaluated by scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectrometer. We also investigated the influences of BHb concentration and adsorption time on the performance of MOF@DES-MIPs. The maximal adsorption capacity of MOF@DES-MIPs to BHb reached 151.28 mg g^-1, and the MOF@DES-MIPs showed good selectivity and fast adsorption equilibrium, which might offer a novel method for the preparation and research of molecularly imprinted polymers of biomacromolecules. In addition, MOF@DES-MIPs were successfully applied in the selective recognition of BHb from a real bovine blood sample. Graphical abstract.