Nitrogen and sulfur Co-doped carbon dots as ecofriendly and effective corrosion inhibitors for Q235 carbon steel in 1 M HCl solution

Sugar Cane (Saccharum officinarum L.) Waste Synthesized Si,N,S-Carbon Quantum Dots as High-Performance Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

This work reports the obtention of Si,N,S-CQDs from sugar cane bagasse and their inhibitory action on the mild steel corrosion in 1 mol L-1 HCl solution. The CQDs were successfully obtained and characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, Dynamic light scattering, Raman, and UV-vis techniques, also showing endogenous self-doping. The anti-corrosive activity of CQDs was investigated by gravimetric tests, potentiodynamic polarization curves, electrochemical impedance measurements, atomic force microscopy, and scanning electron microscopy. The electrochemical results show that the CQDs present a predominant inhibitory action on the cathodic process, presenting inhibition efficiency of 82, 89, 91, and 94% for 15, 25, 50, and 100 ppm, respectively. Gravimetric tests varying temperature demonstrate that the inhibitor functions through physical adsorption and remains effective for up to 72 h, exhibiting corrosion efficiency of 80.2, 93.2, 96.3, and 97.8% at 15, 25, 50, and 100 ppm concentrations, respectively, after 72 h of immersion. Dynamic light scattering and zeta potential measurements indicate that agglomerations of CQDs play a crucial role in inhibiting corrosion. These results show an excellent alternative for using sugar cane bagasse to produce CQDs and its application as a corrosion inhibitor, valuing agricultural waste and simultaneously solving industry problems.

Electrochemical and computational insights into the utilization of 2, 2- dithio bisbenzothiazole as a sustainable corrosion inhibitor for mild steel in low pH medium

Industries today place a high premium on environmentally friendly supplies that may effectively inhibit metal dissolution at a reasonable cost. Hence, in this paper, we assessed the corrosion inhibition effectiveness of the Thiazole derivative namely, 2, 2-Dithio Bisbenzothiazole (DBBT) against mild steel (MS) corrosion in 1 M HCl. Several experimental approaches, including gravimetric analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and surface exploration using scanning electron/atomic force microscopy (SEM/AFM) and contact angle (CA), were utilized to conduct the measurements. In 1 M HCl corrosive medium at 298 K in the subsistence of 800 ppm of DBBT, this experiment indicated DBBT as an environment-friendly and sustainable corrosion inhibitor (CI) for MS, demonstrating an inhibition efficiency (IE %) of 97.71%. To deliver a deeper knowledge of the mechanism behind inhibitive behavior, the calculated thermodynamic and activation characteristics were applied. The calculated Gibbs free energy values indicated that the CI interacted physically and chemically with the MS surface, validating physio-chemical adsorption. The findings of the EIS research revealed that an upsurge in the doses of the CI is escorted by an upsurge in polarization resistance (Rp) from (88.05 → 504.04) Ωcm2, and a diminution in double layer capacitance (Cdl) from (97.46 → 46.33) μFcm-2 at (50 → 800) ppm respectively, affirming the inhibitive potential of DBBT. Additionally, the greatest displacement in Ecorr value being 76.13 mV < 85 mV, indicating that DBBT act as a mixed-form CI. To study the further impacts of DBBT on the inhibition capabilities of the compound under investigation, density functional theory (DFT) and molecular dynamics (MD) simulation were employed. Chemical and electrochemical approaches are in agreement with the computational analysis indicating DBBT is the most efficient CI.

Facile preparation, optical mechanism elaboration, and bio-imaging application of fluorescent cellulose nanocrystals with tunable emission wavelength

Interfacing cellulose nanocrystals (CNCs) with fluorescent materials provides more possibilities for constructing of sensory/imaging platforms in biomedical applications. In this work, by harnessing the efficient extraction accompanied modification of CNCs and adjustable optical properties of carbon dots (CDs), we report the constructions and emission wavelength tuning of fluorescent CNCs (F-CNCs) composed of CNC nano-scaffolds and CDs. The as-prepared CNCs are densely decorated with citric acid (CA), which plays the role of carbon source for the in-situ synthesis of CDs on CNCs. For the F-CNCs carrying blue, green, and red emissive CDs, ethylenediamine (EDA), urea, and thiourea are the N or N/S sources. Fingerprints of chemical groups, morphological characters, and redox activities are resolved to elaborate the optical mechanisms of CDs with varying emission colors. The emission wavelength is adjusted by either changing the particle size or introducing new emission centers. Both are primarily achieved via precursor engineering. The F-CNCs reveal quantum yields (QYs) >22 % and negligible fluorescence quenching (< 6 %) upon continuous excitation as long as 24 h. Benefited from their cell membrane penetration capability, the F-CNCs with different emission wavelengths were challenged for multiplexed cytoplasm imaging.

Zero Thermal Quenching Phenomenon of Green Emitting Carbon Dots with High Biocompatibility and Stable Multicolor Biological Imaging in a Hot Environment

Carbon dots are emerging fluorescent nanomaterials with unique physical and chemical properties and a wide range of applications. Herein, we have designed and successfully synthesized thermally stable green emissive nitrogen-doped carbon dots (NCDs) with a photoluminescent quantum yield of 11.32% through facile solvent-free carbonization. NCDs demonstrated zero thermal quenching upon various temperatures modulating from 20 to 80 °C. The green emissive NCDs perform very stably even after heating them at 80 °C for 1 h. The thermal stability mechanism demonstrates that C═O and C═N functional groups control the particle aggregation and protect the fluorescent hub from photo-oxidation and thermal oxidation. Highly biocompatible CDs exhibit bright, stable, and multicolor emissions in T-ca cells under hot circumstances (25-45 °C). Additionally, NCDs offer long-term stability in the biosystem, as evidenced by the fact that the cell retains its brightness about 70% after prolonging the incubation time to 8 days. Furthermore, the fluorescent NCDs are utilized as in vivo imaging agents in the hot environment as they display bright and thermally stable imaging (27-45 °C) under 488 nm excitation. The results confirmed that the produced thermally stable NCDs could be used in biology and related medical fields that require hot environment imaging.

Corrosion protection properties of tetraphenylethylene-based inhibitors toward carbon steel in acidic medium

Four novel corrosion inhibitors (1, 2, 3 and 4) integrating different tetraphenylethylene (TPE) cations and thiocyanate (SCN^-) anions were developed. Weight-loss and electrochemical measurements were employed to assess their protective properties toward carbon steel in 0.5 M H₂SO₄, revealing them as effective corrosion inhibitors in the order of 3 > 4 > 2 > 1, with the inhibition efficiencies of 2, 3 and 4 all exceeding 97%. The inhibitory effect could be attributed to hard and soft acids and bases theory and the synergistic effect of the charged ingredients. The efficiency trend of the corrosion inhibition, as well as inhibition mechanism, was verified by multi-scaled theoretical simulations combined with grand canonical Monte Carlo and molecular dynamic methods.

Comparative study on corrosion inhibition of N doped and N,S codoped carbon dots for carbon steel in strong acidic solution

Carbon steel is the most widely used engineering material, and its corrosion is one of the main areas of concern in many industries. The most practical approach to control this problem is to use corrosion inhibitors. Currently, because of their good water solubility, excellent chemical stability, low cost and nontoxic features, carbon dots (CDs), especially heteroatom-doped CDs, have been developed as green corrosion inhibitors, but the corrosion inhibition efficiency and underlying mechanisms of single- or dual-element doping have not yet been accurately compared and analyzed. Inspired by this, eco-friendly nitrogen-doped and nitrogen, sulfur codoped CDs (N-CDs and N,S-CDs) are prepared via a one-step hydrothermal process, and a comparative study on their inhibition performance for carbon steel corrosion in strong acidic solution is performed. The results show that both N-CDs and N,S-CDs can restrain the corrosion of carbon steel, and their inhibition efficiency increases with increasing concentration and immersion time, reaching approximately 87.9% (N-CDs) and 96.4% (N,S-CDs) at 200 ppm after 1 h of immersion. Molecular dynamics simulation indicates that the strong interaction ability between N,S-CDs and the Fe substrate leads to higher corrosion inhibition performance than the single N doping case, benefiting from the multi-anchor adsorption of N,S-CDs on carbon steel in a strong acidic solution. Therefore, the facile preparation, eco-friendliness and high corrosion inhibition performance of N,S-CDs will provide a new approach for designing highly efficient carbon dots and broadening the application of carbon dots in the corrosion field.

Performance Evaluation of New Chalcone Oxime Functionalized Graphene Oxide as a Corrosion Inhibitor for Carbon Steel in a Hydrochloric Acid Solution

This study aims to synthesize new chalcone oxime functionalized graphene oxide (CO-GO) and investigate the enhancement in corrosion protection. The morphology and structure of the synthesized CO-GO have been characterized by elemental analysis: Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM). Moreover, the effectiveness of corrosion inhibition was investigated by utilizing electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP). The results of the above analyses demonstrate that CO-GO has an outstanding corrosion inhibitor performance of up to 94% and acts as a mixed-type inhibitor with a primarily anodic action. The effect of temperature on a carbon steel surface indicates that the tested composites are chemisorbed. A few techniques were able to provide surface characterization such as scanning electron microscopy and ultraviolet (UV)-visible spectroscopy to confirm inhibitor adsorption on the carbon steel surface.

One-Pot Hydrothermal Synthesized Nitrogen and Sulfur Codoped Carbon Dots for Acid Corrosion Inhibition of Q235 Steel

N and S codoped carbon dots having good water solubility have been successfully made by a novel hydrothermal method and characterized by FTIR, XPS, and TEM. The as-synthesized CDs were carbon particles rich in polar functional groups less than 10 nm in size. Electrochemical measurements, gravimetry, and surface analysis methods were utilized to examine the inhibition characteristics and adsorption mechanism of CDs on the carbon steel in acid pickling solutions. Electrochemical measurements verified that the CDs displayed adequate protection with high inhibition efficiency of 97.8%. The long-term weight-loss experiments up to 72 h further confirmed the excellent corrosion inhibition at room temperature and 313 K. The results presented are helpful for the formulation of more effective acid pickling corrosion inhibitors.