Biosynthesis of magnetite and cobalt ferrite nanoparticles using extracts of "hairy" roots: preparation, characterization, estimation for environmental remediation and biological application

Synthesis of New Complex Ferrite Li0.5MnFe1.5O4: Chemical-Physical and Electrophysical Research

In this article, the sol-gel method was used as a synthesis method, which shows the physicochemical nature of the synthesis of a new complex material, ferrite Li0.5MnFe1.5O4. The structure and composition of the synthesized ferrite were determined by X-ray phase analysis. According to analysis indicators, it was found that our compound is a single-phase, spinel-structured, and syngony-cubic type of compound. The microstructure of the compound and the quantitative composition of the elements contained within it were analyzed under a scanning electron microscope (SEM). Under a scanning electron microscope, microsystems were taken from different parts of Li0.5MnFe1.5O4-type crystallite; the elemental composition of crystals was analyzed; and the general type of surface layer of complex ferrite was shown. As a result, given the fact that the compound consists of a single phase, the clarity of its construction was determined by the topography and chemical composition of the compound. As a result, it was found that the newly synthesized complex ferrites correspond to the formula Li0.5MnFe1.5O4. The particles of the formed compounds have a large size (between 50.0 μm or 20.0 μm and 10.0 μm). Electrophysical measurements were carried out on an LCR-800 unit at intervals of 293-483 K and at frequencies of 1.5 and 10 kHz. An increase in frequency to 10 kHz led to a decrease in the value ε in the range of the studied temperature (293-483 K).

Green synthesis of cobalt ferrite and Mn doped cobalt ferrite nanoparticles: Anticancer, antidiabetic and antibacterial studies

BACKGROUND

CoFe2O4 are important magnetic NPs with high coercivity and moderate magnetization. These properties of CoFe2O4 NPs show variation when doped with various metals. Recent studies explained that Cobalt ferrites doped with metal ion like Mn+2, have attracted increasing attention in many applications, particularly in biomedical applications. A relatively simple way is employing plants and their extracts as precursors instead of toxic chemicals to produce NPs with desirable characteristic. In current study we report green synthesis and characterization of magnetic (CoFe2O4, MnCoFe2O4, CoFe2O4@S.C, MnCoFe2O4@S.C) nanoparticles using ethanolic extract of Swertia Chirata. To enhance application as biocompatible magnetic nano drug delivery vector and cell targeting efficacy of drugs, Glimepiride (GLM), Dexamethasone (DXM), Fexofenadine (FEX) and Levofloxacin (LVX) 1were loaded on synthesized NPs. Synthesized CFNPs has been broadly characterized and applied for in vitro anticancer, antidiabetic and antibacterial potential.

METHODS

For synthesis of CoFe2O4 (CF), CoMnFe2O4 (CFM), CoFe2O4@S.C (SCF) & CoMnFe2O4 @S.C (SCFM), stochiometric amounts 5 mmol of CoCl2·6 H2O (0.284 g) and 10 mmol FeCl3·6 H2O (0.378 g) were dissolved in 13 mL of deionized water. To this sodium acetate (3.05 g) and urea (0.6 g) were added until complete dissolution. Afterward n-heptane was added, and contents were then transferred to Teflon lining autoclave at 180 °C for 4 h. Black powder CoFe2O4 NPs after washing, were dried and calcined at 450 oC for 2 h.

RESULTS

XRD diffractogram of CF have proved the single-phase cubic spinel structure formation for all samples. Swertia Chirata formulations were shown to have effective in vitro antidiabetic activity. CF, CFM & SCFM showed good inhibition of α-glucosidase with very low concentration 6 µg/mL, 5 µg/mL and 4 µg/mL as compare to 12.41 µg/mL of acarbose. SCF showed that the value slightly higher than 16 µg/mL compared to standard. Drug loaded CFNPs (L-CFNPs, F-CFNPs, D-CFNPs & G-CFNPs) also effectively inhibited α-glucosidase. IC50 value for CFNPs inhibition of α-glucosidase was 12.4 µg/mL. All synthesized CF NPs showed cytotoxic potential against breast cancer cells MCF-7. About 50-60% cell viability and cytotoxicity 40% were observed for bare CFNPs as compare to Doxorubicin with related toxicity 80% and 20% cell viability. Among synthesized samples almost all samples without conjugation of any drug showed activities against at least one bacterial strain. CFM, SCF, SCFM were active against S. aureus at concentration 100 µg/mL, 100 µg/mL, and 50 µg/mL respectively.

CONCLUSION

The synthesized CF NPs showed significant cytotoxic potential against MCF-7 breast cancer cell line. Further, drug loaded samples displayed lesser cell viability and slightly increased cytotoxicity in range of 40-50% in comparison with bare CFNPs. However, higher toxicity was observed for CFMGS towards MCF-7 cells with results nearly equal to Doxorubicin with significant decrease in viability. CF, CFM & SCFM showed good inhibition of α-glucosidase with very low concentration 6 µg/mL, 5 µg/mL and 4 µg/mL as compare to 12.41 µg/mL of acarbose. Among synthesized samples almost all samples without conjugation of any drug showed activities against at least one bacterial strain.

Research on the physical properties of LiMn0.5Fe2O4 spinel ferrites by the combination of optical, magnetic, and dielectric behaviors

Ferrite compounds have recently attracted significant interest because of their multifunctional properties. This work investigates the optical, magnetic, and dielectric properties of a LiMn0.5Fe2O4 ferrite prepared by a solid-state reaction. Raman spectroscopy analysis substantiated the presence of the 5 active modes representing the vibration of the oxygen anion at both tetrahedral and octahedral sites. The direct optical band gap was estimated to be 3.51 eV, which indicates the semiconductor behavior of the compound. A theoretical modulation of the hysteresis loop was done to confirm the dominance of the ferromagnetic contribution over the antiferromagnetic one. Furthermore, the dielectric permittivity result indicated a colossal value of the order of 103. The dielectric losses are characterized by the Giuntini law to extract the relaxation process, which is hidden by the DC-conductivity process. Our results indicate the potential of LiMn0.5Fe2O4 for applications in multifunctional devices.

Morphology-Controlled Green Synthesis of Magnetic Nanoparticles Using Extracts of 'Hairy' Roots: Environmental Application and Toxicity Evaluation

Magnetic nanoparticles (MNPs) were "green" synthesized from a FeCl3/FeSO4/CoCl2 mixture using ethanolic extracts of Artemisia tilesii Ledeb 'hairy' roots. The effect of chemical composition and reducing power of ethanolic extracts on the morphology, size destribution and other features of obtained MNPs was evaluated. Depending on the extract properties, nanosized magnetic materials of spherical (8-11 nm), nanorod-like (15-24 nm) and cubic (14-24 nm) shapes were obtained via self-assembly. Microspherical MNPs composed of nanoclusters were observed when using extract of the control root line in the synthesis. Polyhedral magnetic nanoparticles with an average size of ~30 nm were formed using 'hairy' root ethanolic extract without any additive. Studied samples manifested excellent magnetic characteristics. Field-dependent magnetic measurements of most MNPs demonstrated a saturation magnetization of 42.0-72.9 emu/g with negligible coercivity (∼0.02-0.29 emu/g), indicating superparamagnetic behaviour only for solids with a magnetite phase. The synthesized MNPs were minimally aggregated and well-dispersed in aqueous medium, probably due to their stabilization by bioactive compounds in the initial extract. The nanoparticles were tested for magnetic solid-phase extraction of copper (Cu), cadmium (Cd) and arsenic (As) pollutants in aqueous solution, followed by ICP-OES analysis. The magnetic oxides, mainly magnetite, showed high adsorption capacity and effectively removed arsenic ions at pH 6.7. The maximum adsorption capacity was ~150 mg/g for As(III, V) on the selected MNPs with cubic morphology, which is higher than that of previously reported adsorbents. The best adsorption was achieved using Fe3O4-based nanomaterials with low crystallinity, non-spherical form and a large number of surface-localized organic molecules. The phytotoxicity of the obtained MNPs was estimated in vitro using lettuce and chicory as model plants. The obtained MNPs did not exhibit inhibitory activity. This work provides novel insights on the morphology of "green" synthesized magnetic nanoparticles that can be used for applications in adsorption technologies.

Spectroscopic Study of Phytosynthesized Ag Nanoparticles and Their Activity as SERS Substrate

The affordable and scalable synthesis of noble metal nanoparticles that are biocompatible without additional functionalization steps has been a growing field of research, stimulated by numerous prospective applications of these NPs. In the case of phytosynthesized or biogenic noble metal NPs, the mechanism of NP stabilization by biomolecules contained in each particular plant extract or living organism determines the possible applications of these NPs. In this work, we investigated Ag NPs synthesized in water with plant extracts of common toothwort (Lathraea squamaria) and two species of pepper (Capsicum annuum and Capsicum chinense). From FTIR and XPS, we drew conclusions about the composition of the functional groups and molecules that stabilize NPs in each extract, such as polysaccharide compounds (pectins, cellulose, glycosides and phenolic acids). Distinct characteristic IR features of amide I and amide II proteins were observed, which are common in plant extracts, while features of amide III were not distinctly observed in our extracts. A Raman spectroscopy study revealed weak own-SERS activity of the biomolecules of the extract and high efficiency of the NPs in the enhancement of “external” analytes, such as dyes and antibodies. This is the first report of the efficient SERS application of phytosynthesized Ag NPs.

Carbon nanotubes/Al2O3 composite derived from catalytic reforming of the pyrolysis volatiles of the mixture of polyethylene and lignin for highly-efficient removal of Pb(ii)

In the present study, the coked catalysts derived from catalytic reforming of the pyrolysis volatiles of polyethylene (PE), lignin (LG) and their mixture were developed as low-cost and environmentally-friendly carbon materials-containing composites to remove heavy metal ions from aqueous solution. The composites were thoroughly characterized by SEM, TEM, XRD, TGA and FT-IR and then their adsorption capability towards Pb(ii) was investigated. It is found that curved cone-shape carbon nanotubes (CNTs) with abundant structural defects and O-containing surface functional groups, such as C–O, C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O and –OH, can be obtained from the catalytic reforming of the mixture of PE and LG. The CNT-containing catalyst composite presents a superior adsorption capability towards Pb(ii) when it is employed in Pb(ii) removal. Adsorption isotherm and adsorption kinetics studies show that the adsorption process can be well simulated by the Langmuir isotherm and pseudo-second-order model, demonstrating that the adsorption is subjected to a homogeneous and chemical process. The calculated maximum adsorption capacity is as high as 146.08 mg g⁻¹, which is much higher than most of the adsorbents reported. Moreover, thermodynamic analysis reveals that the adsorption is spontaneous and endothermic. Accordingly, the used catalyst from the catalytic reforming can be developed as a low-cost and highly-efficient adsorbent.

The coked catalysts derived from catalytic reforming of the pyrolysis volatiles of polyethylene, lignin and their mixture were developed as low-cost and high-efficient carbon materials-containing composites to remove heavy metal ions from water.