Biomedical nanobubbles and opportunities for microfluidics

On-chip Raman spectroscopy of live single cells for the staging of oesophageal adenocarcinoma progression

The absence of early diagnosis contributes to oesophageal cancer being the sixth most common cause of global cancer-associated deaths, with a 5-year survival rate of < 20%. Barrett's oesophagus is the main pre-cancerous condition to adenocarcinoma development, characterised by the morphological transition of oesophageal squamous epithelium to metaplastic columnar epithelium. Early tracking and treatment of oesophageal adenocarcinoma could dramatically improve with diagnosis and monitoring of patients with Barrett's Oesophagus. Current diagnostic methods involve invasive techniques such as endoscopies and, with only a few identified biomarkers of disease progression, the detection of oesophageal adenocarcinoma is costly and challenging. In this work, single-cell Raman spectroscopy was combined with microfluidic techniques to characterise the development of oesophageal adenocarcinoma through the progression of healthy epithelial, Barrett's oesophagus and oesophageal adenocarcinoma cell lines. Principal component analysis and linear discriminant analysis were used to classify the different stages of cancer progression. with the ability to differentiate between healthy and cancerous cells with an accuracy of 97%. Whilst the approach could also separate the dysplastic stages from healthy or cancer with high accuracy-the intra-class separation was approximately 68%. Overall, these results highlight the potential for rapid and reliable diagnostic/prognostic screening of Barrett's Oesophagus patients.

High throughput microfluidic nanobubble generation by microporous membrane integration and controlled bubble shrinkage

Microfluidics has recently been proposed as a viable method for producing bulk nanobubbles for use in various applications. The portability, compact size, and capacity to precisely control fluids on a small scale are a few of the benefits of microfluidics that may be exploited to create customized bulk nanobubbles. However, despite the potential of microfluidic nanobubble generation, low throughput and limited nanobubble concentration remain challenging for microfluidics. Here, we integrate a microporous silicon membrane into a polydimethylsiloxane microfluidic chip to generate bulk nanobubbles in the 100-140 nm diameter range with a concentration of up to 108 mL-1. We investigate the nanobubble size and morphology using several characterisation techniques, including transmission electron microscopy, resonance mass measurement, dynamic light scattering, and the Tyndall effect. This new nanobubble generation technique can increase nanobubble concentration by ∼ 23 times compared to earlier microfluidic nanobubble generation platforms, which should increase the feasibility of translation to medical applications.

Nanobubble aeration enhanced wastewater treatment and bioenergy generation in constructed wetlands coupled with microbial fuel cells

Artificial aeration is a widely used approach in wastewater treatment to enhance the removal of pollutants, however, traditional aeration techniques have been challenging due to the low oxygen transfer rate (OTR). Nanobubble aeration has emerged as a promising technology that utilise nano-scale bubbles to achieve higher OTRs owing to their large surface area and unique properties such as longevity and reactive oxygen species generation. This study, for the first time, investigated the feasibility of coupling nanobubble technology with constructed wetlands (CWs) for treating livestock wastewater. The results demonstrated that nanobubble-aerated CWs achieved significantly higher removal efficiencies of total organic carbon (TOC) and ammonia (NH4+-N), at 49 % and 65 %, respectively, compared to traditional aeration treatment (36 % and 48 %) and the control group (27 % and 22 %). The enhanced performance of the nanobubble-aerated CWs can be attributed to the nearly three times higher amount of nanobubbles (Ø < 1 μm) generated from the nanobubble pump (3.68 × 108 particles/mL) compared to the normal aeration pump. Moreover, the microbial fuel cells (MFCs) embedded in the nanobubble-aerated CWs harvested 5.5 times higher electricity energy (29 mW/m2) compared to the other groups. The results suggested that nanobubble technology has the potential to trigger the innovation of CWs by enhancing their capacity for water treatment and energy recovery. Further research needs are proposed to optimise the generation of nanobubbles, allowing them to be effectively coupled with different technologies for engineering implementation.

Bubble-Based Drug Delivery Systems: Next-Generation Diagnosis to Therapy

Current radiologic and medication administration is systematic and has widespread side effects; however, the administration of microbubbles and nanobubbles (MNBs) has the possibility to provide therapeutic and diagnostic information without the same ramifications. Microbubbles (MBs), for instance, have been used for ultrasound (US) imaging due to their ability to remain in vessels when exposed to ultrasonic waves. On the other hand, nanobubbles (NBs) can be used for further therapeutic benefits, including chronic treatments for osteoporosis and cancer, gene delivery, and treatment for acute conditions, such as brain infections and urinary tract infections (UTIs). Clinical trials are also being conducted for different administrations and utilizations of MNBs. Overall, there are large horizons for the benefits of MNBs in radiology, general medicine, surgery, and many more medical applications. As such, this review aims to evaluate the most recent publications from 2016 to 2022 to report the current uses and innovations for MNBs.

Gas-assisted microfluidic step-emulsification for generating micron- and submicron-sized droplets

Micron- and submicron-sized droplets have extensive applications in biomedical diagnosis and drug delivery. Moreover, accurate high-throughput analysis requires a uniform droplet size distribution and high production rates. Although the previously reported microfluidic coflow step-emulsification method can be used to generate highly monodispersed droplets, the droplet diameter (d) is constrained by the microchannel height (b), d ≳ 3 b , while the production rate is limited by the maximum capillary number of the step-emulsification regime, impeding emulsification of highly viscous liquids. In this paper, we report a novel, gas-assisted coflow step-emulsification method, where air serves as the innermost phase of a precursor hollow-core air/oil/water emulsion. Air gradually diffuses out, producing oil droplets. The size of the hollow-core droplets and the ultrathin oil layer thickness both follow the scaling laws of triphasic step-emulsification. The minimal droplet size attains d ≈ 1.7 b , inaccessible in standard all-liquid biphasic step-emulsification. The production rate per single channel is an order-of-magnitude higher than that in the standard all-liquid biphasic step-emulsification and is also superior to alternative emulsification methods. Due to low gas viscosity, the method can also be used to generate micron- and submicron-sized droplets of high-viscosity fluids, while the inert nature of the auxiliary gas offers high versatility.

Microfluidic nanobubbles: observations of a sudden contraction of microbubbles into nanobubbles

Microfluidic devices are often utilized to generate uniform-size microbubbles. In most microfluidic bubble generation experiments, once the bubbles are formed the gas inside the bubbles begin to dissolve into the surrounding aqueous environment. The bubbles shrink until they attain an equilibrium size dictated by the concentration and type of amphiphilic molecules stabilizing the gas-liquid interface. Here, we exploit this shrinkage mechanism, and control the solution lipid concentration and microfluidic geometry, to make monodisperse bulk nanobubbles. Interestingly, we make the surprising observation of a critical microbubble diameter above and below which the scale of bubble shrinkage dramatically changes. Namely, microbubbles generated with an initial diameter larger than the critical diameter shrinks to a stable diameter that is consistent with previous literature. However, microbubbles that are initially smaller than the critical diameter experience a sudden contraction into nanobubbles whose size is at least an order-of-magnitude below expectations. We apply electron microscopy and resonance mass measurement methods to quantify the size and uniformity of the nanobubbles, and probe the dependence of the critical bubble diameter on the lipid concentration. We anticipate that further analysis of this unexpected microbubble sudden contraction regime can lead to more robust technologies for making monodisperse nanobubbles.

On Nanobubble Dynamics under an Oscillating Pressure Field during Salting-out Effects and Its DLVO Potential

We have investigated the origin, stability, and nanobubble dynamics under an oscillating pressure field followed by the salting-out effects. The higher solubility ratio (salting-out parameter) of the dissolved gases and pure solvent nucleates nanobubbles during the salting-out effect, and the oscillating pressure field enhances the nanobubble density further as solubility varies linearly with gas pressure by Henry's law. A novel method for refractive index estimation is developed to differentiate nanobubbles and nanoparticles based on the scattering intensity of light. The electromagnetic wave equations have been numerically solved and compared with the Mie scattering theory. The scattering cross-section of the nanobubbles was estimated to be smaller than the nanoparticles. The DLVO potentials of the nanobubbles predict the stable colloidal system. The zeta potential of nanobubbles varied by generating nanobubbles in different salt solutions, and it is characterized by particle tracking, dynamic light scattering, and cryo-TEM. The size of nanobubbles in salt solutions was reported to be higher than that in pure water. The novel mechanical stability model is proposed by considering both ionic cloud and electrostatic pressure at the charged interface. The ionic cloud pressure is derived by electric flux balance, and it is found to be twice the electrostatic pressure. The mechanical stability model for a single nanobubble predicts the existence of stable nanobubbles in the stability map.

Microfluidic Methods for Generation of Submicron Droplets: A Review

Submicron droplets are ubiquitous in nature and widely applied in fields such as biomedical diagnosis and therapy, oil recovery and energy conversion, among others. The submicron droplets are kinetically stable, their submicron size endows them with good mobility in highly constricted pathways, and the high surface-to-volume ratio allows effective loading of chemical components at the interface and good heat transfer performance. Conventional generation technology of submicron droplets in bulk involves high energy input, or relies on chemical energy released from the system. Microfluidic methods are widely used to generate highly monodispersed micron-sized or bigger droplets, while downsizing to the order of 100 nm was thought to be challenging because of sophisticated nanofabrication. In this review, we summarize the microfluidic methods that are promising for the generation of submicron droplets, with an emphasize on the device fabrication, operational condition, and resultant droplet size. Microfluidics offer a relatively energy-efficient and versatile tool for the generation of highly monodisperse submicron droplets.

Clean production and characterization of nanobubbles using laser energy deposition

We have demonstrated the production of laser bulk nanobubbles (BNB) with ambient radii typically below 500 nm. The gaseous nature of the nanometric objects was confirmed by a focused acoustic pulse that expands the gas cavities to a size that can be visualized with optical microscopy. The BNBs were produced on demand by a collimated high-energy laser pulse in a "clean" way, meaning that no solid particles or drops were introduced in the sample by the generation method. This is a clear advantage relative to the other standard BNB production techniques. Accordingly, the role of nanometric particles in laser bubble production is discussed. The characteristics of the nanobubbles were evaluated with two alternative methods. The first one measures the response of the BNBs to acoustic pulses of increasing amplitude to estimate their rest radius through the calculation of the dynamics Blake threshold. The second one is based on the bubble dissolution dynamics and the correlation of the bubble's lifetime with its initial size. The high reproducibility of the present system in combination with automated data acquisition and analysis constitutes a sound tool for studying the effects of the liquid and gas properties on the stability of the BNBs solution.

Nanobubble technologies: Applications in therapy from molecular to cellular level

Nanobubbles are gaseous entities suspended in bulk liquids that have widespread beneficial usage in many industries. Nanobubbles are already proving to be versatile in furthering the effectiveness of disease treatment on cellular and molecular levels. They are functionalized with biocompatible and stealth surfaces to aid in the delivery of drugs. At the same time, nanobubbles serve as imaging agents due to the echogenic properties of the gas core, which can also be utilized for controlled and targeted delivery. This review provides an overview of the biomedical applications of nanobubbles, covering their preparation and characterization methods, discussing where the research is currently focused, and how they will help shape the future of biomedicine.

Accelerated germination of aged recalcitrant seeds by K+-rich bulk oxygen nanobubbles

Bulk nanobubbles, measuring less than 200 nm in water, have shown their salient properties in promoting growth in various species of plants and orthodox seeds, and as potential drug-delivery carriers in medicine. Studies of recalcitrant seeds have reported markedly increased germination rates with gibberellin treatment; however, neither the mechanism promoting germination nor the implication for food safety is well elucidated. In our study, recalcitrant wasabi (Eutrema japonicum) seeds treated with bulk oxygen nanobubbles (BONB) containing K⁺, Na⁺, and Cl^- (BONB-KNaCl) showed significantly accelerated germination. As germination progressed, 99% of K⁺ ions in the BONB-KNaCl medium were absorbed by the seeds, whereas Ca²⁺ ions were released. These results suggest that the germination mechanism involves the action of K⁺ channels for migration of K⁺ ions down their concentration gradient and Ca²⁺ pumps for the movement of Ca²⁺ ions, the first potential discovery in germination promotion in recalcitrant seeds using nutrient solutions with BONB-KNaCl.

Advances and opportunities in nanoimaging agents for the diagnosis of inflammatory lung diseases

The development of rapid, noninvasive diagnostics to detect lung diseases is a great need after the COVID-2019 outbreak. The nanotechnology-based approach has improved imaging and facilitates the early diagnosis of inflammatory lung diseases. The multifunctional properties of nanoprobes enable better spatial-temporal resolution and a high signal-to-noise ratio in imaging. Targeted nanoimaging agents have been used to bind specific tissues in inflammatory lungs for early-stage diagnosis. However, nanobased imaging approaches for inflammatory lung diseases are still in their infancy. This review provides a solution-focused approach to exploring medical imaging technologies and nanoprobes for the detection of inflammatory lung diseases. Prospects for the development of contrast agents for lung disease detection are also discussed.

Interactions between O2 Nanobubbles and the Pulmonary Surfactant in the Presence of Inhalation Medicines

A dispersion of oxygen nanobubbles (O₂-NBs) is an extraordinary gas-liquid colloidal system where spherical gas elements can be considered oxygen transport agents. Its conversion into inhalation aerosol by atomization with the use of nebulizers, while maintaining the properties of the dispersion, gives new opportunities for its applications and may be attractive as a new concept in treating lung diseases. The screening of O₂-NBs interactions with lung fluids is particularly needed in view of an O₂-NBs application as a promising aerosol drug carrier with the additional function of oxygen supplementation. The aim of the presented studies was to investigate the influence of O₂-NBs dispersion combined with the selected inhalation drugs on the surface properties of two types of pulmonary surfactant models (lipid and lipid-protein model). The characteristics of the air-liquid interface were carried out under breathing-like conditions using two selected tensiometer systems: Langmuir-Wilhelmy trough and the oscillating droplet tensiometer. The results indicate that the presence of NBs has a minor effect on the dynamic characteristics of the air-liquid interface, which is the desired effect in the context of a potential use in inhalation therapies.