Recent progresses in the synthesis of MnO2 nanowire and its application in environmental catalysis

Xerogel-Derived Manganese Oxide/N-Doped Carbon as a Non-Precious Metal-Based Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells for Energy Conversion Applications

Current study provides a novel strategy to synthesize the nano-sized MnO nanoparticles from the quick, ascendable, sol-gel synthesis strategy. The MnO nanoparticles are supported on nitrogen-doped carbon derived from the cheap sustainable source. The resulting MnO/N-doped carbon catalysts developed in this study are systematically evaluated via several physicochemical and electrochemical characterizations. The physicochemical characterizations confirms that the crystalline MnO nanoparticles are successfully synthesized and are supported on N-doped carbons, ascertained from the X-ray diffraction and transmission electron microscopic studies. In addition, the developed MnO/N-doped carbon catalyst was also found to have adequate surface area and porosity, similar to the traditional Pt/C catalyst. Detailed investigations on the effect of the nitrogen precursor, heat treatment temperature, and N-doped carbon support on the ORR activity is established in 0.1 M of HClO4. It was found that the MnO/N-doped carbon catalysts showed enhanced ORR activity with a half-wave potential of 0.69 V vs. RHE, with nearly four electron transfers and excellent stability with just a loss of 10 mV after 20,000 potential cycles. When analyzed as an ORR catalyst in dual-chamber microbial fuel cells (DCMFC) with Nafion 117 membrane as the electrolyte, the MnO/N-doped carbon catalyst exhibited a volumetric power density of ~45 mW m2 and a 60% degradation of organic matter in 30 days of continuous operation.

Biomedical applications of MnO2 nanomaterials as nanozyme-based theranostics

Manganese dioxide (MnO₂) nanoenzymes/nanozymes (MnO₂-NEs) are 1-100 nm nanomaterials that mimic catalytic, oxidative, peroxidase, and superoxide dismutase activities. The oxidative-like activity of MnO₂-NEs makes them suitable for developing effective and low-cost colorimetric detection assays of biomolecules. Interestingly, MnO₂-NEs also demonstrate scavenging properties against reactive oxygen species (ROS) in various pathological conditions. In addition, due to the decomposition of MnO₂-NEs in the tumor microenvironment (TME) and the production of Mn²⁺, they can act as a contrast agent for improving clinical imaging diagnostics. MnO₂-NEs also can use as an in situ oxygen production system in TME, thereby overcoming hypoxic conditions and their consequences in the progression of cancer. Furthermore, MnO₂-NEs as a shell and coating make the nanosystems smart and, therefore, in combination with other nanomaterials, the MnO₂-NEs can be used as an intelligent nanocarrier for delivering drugs, photosensitizers, and sonosensitizers in vivo. Moreover, these capabilities make MnO₂-NEs a promising candidate for the detection and treatment of different human diseases such as cancer, metabolic, infectious, and inflammatory pathological conditions. MnO₂-NEs also have ROS-scavenging and anti-bacterial properties against Gram-positive and Gram-negative bacterial strains, which make them suitable for wound healing applications. Given the importance of nanomaterials and their potential applications in biomedicine, this review aimed to discuss the biochemical properties and the theranostic roles of MnO₂-NEs and recent advances in their use in colorimetric detection assays of biomolecules, diagnostic imaging, drug delivery, and combinatorial therapy applications. Finally, the challenges of MnO₂-NEs applications in biomedicine will be discussed.

Significance of MnO2 Type and Solution Parameters in Manganese Removal from Water Solution

A very low concentration of manganese (Mn) in water is a critical issue for municipal and industrial water supply systems. Mn removal technology is based on the use of manganese oxides (MnO_x), especially manganese dioxide (MnO₂) polymorphs, under different conditions of pH and ionic strength (water salinity). The statistical significance of the impact of polymorph type (akhtenskite ε-MnO₂, birnessite δ-MnO₂, cryptomelane α-MnO₂ and pyrolusite β-MnO₂), pH (2-9) and ionic strength (1-50 mmol/L) of solution on the adsorption level of Mn was investigated. The analysis of variance and the non-parametric Kruskal-Wallis H test were applied. Before and after Mn adsorption, the tested polymorphs were characterized using X-ray diffraction, scanning electron microscope techniques and gas porosimetry analysis. Here we demonstrated the significant differences in adsorption level between MnO₂ polymorphs' type and pH; however, the statistical analysis proves that the type of MnO₂ has a four times stronger influence. There was no statistical significance for the ionic strength parameter. We showed that the high adsorption of Mn on the poorly crystalline polymorphs leads to the blockage of micropores in akhtenskite and, contrary, causes the development of the surface structure of birnessite. At the same time, no changes in the surfaces of cryptomelane and pyrolusite, the highly crystalline polymorphs, were found due to the very small loading by the adsorbate.

Designing Highly Efficient Cu2O-CuO Heterojunction CO Oxidation Catalysts: The Roles of the Support Type and Cu2O-CuO Interface Effect

In this work, a series of Cu₂O/S (S = α-MnO₂, CeO₂, ZSM-5, and Fe₂O₃) supported catalysts with a Cu₂O loading amount of 15% were prepared by the facile liquid-phase reduction deposition-precipitation strategy and investigated as CO oxidation catalysts. It was found that the Cu₂O/α-MnO₂ catalyst exhibits the best catalytic activity for CO oxidation. Additionally, a series of Cu₂O-CuO/α-MnO₂ heterojunctions with varied proportion of Cu⁺/Cu²⁺ were synthesized by further calcining the pristine Cu₂O/α-MnO₂ catalyst. The ratio of the Cu⁺/Cu²⁺ could be facilely regulated by controlling the calcination temperature. It is worth noting that the Cu₂O-CuO/α-MnO₂-260 catalyst displays the best catalytic performance. Moreover, the kinetic studies manifest that the apparent activation energy could be greatly reduced owing to the excellent redox property and the Cu₂O-CuO interface effect. Therefore, the Cu₂O-CuO heterojunction catalysts supported on α-MnO₂ nanotubes are believed to be the potential catalyst candidates for CO oxidation with advanced performance.

α-MnO2 Nanowire Structure Obtained at Low Temperature with Aspects in Environmental Remediation and Sustainable Energy Applications

Hydrothermally obtained α-MnO2 nanowire characterizations confirm the tetragonal crystalline structure that is several micrometers long and 20–30 nm in diameter with narrow distributions in their dimensions. The absorption calculated from diffuse reflectance of α-MnO2 occurred in the visible region ranging from 400 to 550 nm. The calculated band gap with Quantum Espresso using HSE approximation is ~2.4 eV for the ferromagnetic case, with a slightly larger gap of 2.7 eV for the antiferromagnetic case, which is blue-shifted as compared to the experimental. The current work also illustrates the transformations that occur in the material under heat treatment during TGA analysis, with the underlying mechanism. Electrochemical studies on graphite supports modified with α-MnO2 compositions revealed the modified electrode with the highest electric double-layer capacitance of 3.444 mF cm−2. The degradation rate of an organic dye—rhodamine B (RhB)—over the compound in an acidic medium was used to examine the catalytic and photocatalytic activities of α-MnO2. The peak shape changes in the time-dependent visible spectra of RhB during the photocatalytic reaction were more complex and progressive. In two hours, RhB degradation reached 97% under sun irradiation and 74% in the dark.

Enhancing the Low-Temperature CO Oxidation over CuO-Based α-MnO2 Nanowire Catalysts

A series of CuO-based catalysts supported on the α-MnO₂ nanowire were facilely synthesized and employed as the CO oxidation catalysts. The achieved catalysts were systematically characterized by XRD, SEM, EDS-mapping, XPS and H₂-TPR. The catalytic performances toward CO oxidation had been carefully evaluated over these CuO-based catalysts. The effects of different loading methods, calcination temperatures and CuO loading on the low temperature catalytic activity of the catalyst were investigated and compared with the traditional commercial MnO₂ catalyst with a block structure. It was found that the slenderness ratio of a CuO/α-MnO₂ nanowire catalyst decreases with the increase in CuO loading capacity. The results showed that when CuO loading was 3 wt%, calcination temperature was 200 °C and the catalyst that was supported by the deposition precipitation method had the highest catalytic activity. Besides, the α-MnO₂ nanowire-supported catalysts with excellent redox properties displayed much better catalytic performances than the commercial MnO₂-supported catalyst. In conclusion, the CuO-based catalysts that are supported by α-MnO₂ nanowires are considered as a series of promising CO oxidation catalysts.

Characteristics of Doped TiO2 Nanoparticle Photocatalysts Prepared by the Rotten Egg White

In this study, expired egg white was used as a template, and a sol–gel method was employed to prepare pure-phase TiO₂ nano-powder and mixed-phase powders doped with NaF and NaI. The influences of different calcination temperatures, doping elements, and doping amounts during the preparation process on the photocatalytic performance and activity of the prepared TiO₂ powders were studied. The results of the experiments showed that the F-doped TiO₂ had the highest photocatalytic activity when the doping amount was 1.2%, as examined by EDS, where the sintering temperature was 500 °C. F-doped TiO₂ nanoparticles were also synthesized by the sol–gel method using tetrabutyl titanate and NaF mixed with expired egg white protein as the precursor. The F-TiO₂ photocatalyst was characterized using FE-SEM, HR-TEM, EDS, XPS, and UV-Vis, and the photocatalytic activity was evaluated by photodegradation of methylene blue under visible light. The results showed that doping with F reduced the energy band gap (3.04 eV) of TiO₂, thereby increasing the photocatalytic activity in the visible-light region. The visible-light wavelength range and photocatalytic activity of the catalyst were also affected by the doping amount.