Recent progress in metal-organic framework/graphene-derived materials for energy storage and conversion: design, preparation, and application

Interface-Engineered 2D Heterojunction with Photoelectric Dual Gain: Mxene@MOF-Enhanced SPR Spectroscopy for Direct Sensing of Exosomes

MXene is widely used in the construction of optoelectronic interfaces due to its excellent properties. However, the hydrophilicity and metastable surface of MXene lead to its oxidation behavior, resulting in the degradation of its various properties, which seriously limits its practical application. In this work, a 2D metal-organic framework (2D MOF) with matching 2D morphology, excellent stability performance, and outstanding optoelectronic performance is grown in situ on the MXene surface through heterojunction engineering to suppress the direct contact between reactive molecules and the inner layer material without affecting the original advantages of MXene. The photoelectric dual gain MXene@MOF heterojunction is confirmed. As a photoelectric material, its properties are highly suitable for the demand of interface sensitization layer materials of surface plasmon resonance (SPR). Therefore, using SPR as a platform for the application of this interface material, the performance of MXene@MOF and its potential mechanism to enhance SPR are analyzed in depth using experiments combined with simulation calculations (FDTD/DFT). Finally, the MXene@MOF/peptides-SPR sensor is constructed for rapid and sensitive detection of the cancer marker exosomes to explore its potential in practical applications. This work offers a forward-looking strategy for the design of interface materials with excellent photoelectric performance.

Graphene and MOF Assembly: Enhanced Fabrication and Functional Derivative via MOF Amorphization

The integration of graphene and metal-organic frameworks (MOFs) has numerous implications across various domains, but fabricating such assemblies is often complicated and time-consuming. Herein, a one-step preparation of graphene-MOF assembly is presented by directly impregnating vertical graphene (VG) arrays into the zeolitic imidazolate framework (ZIF) precursors under ambient conditions. This approach can effectively assemble multiple ZIFs, including ZIF-7, ZIF-8, and ZIF-67, resulting in their uniform dispersion on the VG with adjustable sizes and shapes. Hydrogen defects on the VG surface are critical in inducing such high-efficiency ZIF assembly, acting as the reactive sites to interact with the ZIF precursors and facilitate their crystallisation. The versatility of VG-ZIF-67 assembly is further demonstrated by exploring the process of MOF amorphization. Surprisingly, this process leads to an amorphous thin-film coating formed on VG (named VG-IL-amZIF-67), which preserves the short-range molecular bonds of crystalline ZIF-67 while sacrificing the long-range order. Such a unique film-on-graphene architecture maintains the essential characteristics and functionalities of ZIF-67 within a disordered arrangement, making it well-suited for electrocatalysis. In electrochemical oxygen reduction, VG-IL-amZIF-67 exhibits exceptional activity, selectivity, and stability to produce H2O2 in acid media.

Fe,Ni-Based Metal-Organic Frameworks Embedded in Nanoporous Nitrogen-Doped Graphene as a Highly Efficient Electrocatalyst for the Oxygen Evolution Reaction

The quest for economically sustainable electrocatalysts to replace critical materials in anodes for the oxygen evolution reaction (OER) is a key goal in electrochemical conversion technologies, and, in this context, metal-organic frameworks (MOFs) offer great promise as alternative electroactive materials. In this study, a series of nanostructured electrocatalysts was successfully synthesized by growing tailored Ni-Fe-based MOFs on nitrogen-doped graphene, creating composite systems named MIL-NG-n. Their growth was tuned using a molecular modulator, revealing a non-trivial trend of the properties as a function of the modulator quantity. The most active material displayed an excellent OER performance characterized by a potential of 1.47 V (vs. RHE) to reach 10 mA cm-2, a low Tafel slope (42 mV dec-1), and a stability exceeding 18 h in 0.1 M KOH. This outstanding performance was attributed to the synergistic effect between the unique MOF architecture and N-doped graphene, enhancing the amount of active sites and the electron transfer. Compared to a simple mixture of MOFs and N-doped graphene or the deposition of Fe and Ni atoms on the N-doped graphene, these hybrid materials demonstrated a clearly superior OER performance.

MOF/graphene oxide based composites in smart supercapacitors: a comprehensive review on the electrochemical evaluation and material development for advanced energy storage devices

The surge in interest surrounding energy storage solutions, driven by the demand for electric vehicles and the global energy crisis, has spotlighted the effectiveness of carbon-based supercapacitors in meeting high-power requirements. Concurrently, metal-organic frameworks (MOFs) have gained attention as a template for their integration with graphene oxide (GO) in composite materials which have emerged as a promising avenue for developing high-power supercapacitors, elevating smart supercapacitor efficiency, cyclic stability, and durability, providing crucial insights for overcoming contemporary energy storage obstacles. The identified combination leverages the strengths of both materials, showcasing significant potential for advancing energy storage technologies in a sustainable and efficient manner. In this research, an in-depth review has been presented, in which properties, rationale and integration of MOF/GO composites have been critically examined. Various fabrication techniques have been thoroughly analyzed, emphasizing the specific attributes of MOFs, such as high surface area and modifiable porosity, in tandem with the conductive and stabilizing features of graphene oxide. Electrochemical characterizations and physicochemical mechanisms underlying MOF/GO composites have been examined, emphasizing their synergistic interaction, leading to superior electrical conductivity, mechanical robustness, and energy storage capacity. The article concludes by identifying future research directions, emphasizing sustainable production, material optimization, and integration strategies to address the persistent challenges in the field of energy storage. In essence, this research article aims to offer a concise and insightful resource for researchers engaged in overcoming the pressing energy storage issues of our time through the exploration of MOF/GO composites in smart supercapacitors.

Assessing the reinforced molecular/mechanical behaviors of GOs@Mo-MOFs films deposited via electrophoresis onto microdevices: Experimental and theoretical perspectives

One of the primary hurdles in microdevice fabrication lies in ascertaining the most impactful tactics for adapting metal surfaces. Through a one-pot tackle and distinct mechanochemical reactions evoked by 15 min aqueous wet sand-milling (SM-15), we successfully grafted Mo-based metal-organic frameworks (Mo-MOFs) onto graphene oxides (GOs). Following this, a convenient and readily scalable methodology of electrophoretic deposition was implemented to create controllable thickness of SM-15 GOs@Mo-MOFs lubricating films, achieving considerable enhancements of 143% and 91% in hardness and Young's modulus, respectively, when compared to those of SM-15 Mo-MOFs. The successful synthesis of SM-15 GOs@Mo-MOFs was corroborated using strategies such as x-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy. Analyses using the micro-tribotester indicated that the new film exhibited a lowest friction coefficient of roughly 0.5 when imposed with a load of 5 N and sliding speed of 8 mm/s. In addition, the optical profiler nano-indentation in situ scanning probe microscope revealed that SM-15 GOs@Mo-MOFs films had smaller and shallower scratches and grooves compared to SM-15 Mo-MOFs ones. The calculated results of key descriptors (EHOMO, ELUMO, ΔE, etc.) in density functional theory quantitatively disclosed the interaction mechanisms between GOs@Mo-MOFs molecules and microdevices. We first scrutinized the innate properties of molecule adsorption energy and frictional mechanical behaviors using synergetic cross-scale simulations, such as Monte Carlo and finite element methods. The expectation was that this process would motivate a valuable technique for shielding in the thriving micromanufacturing.

A Review on Covalent Organic Frameworks as Artificial Interface Layers for Li and Zn Metal Anodes in Rechargeable Batteries

Li and Zn metals are considered promising negative electrode materials for the next generation of rechargeable metal batteries because of their non-toxicity and high theoretical capacity. However, the uneven deposition of metal ions (Li+ , Zn2+ ) and the uncontrolled growth of dendrites result in poor electrochemical stability, unsatisfactory cycle life, and rapid capacity decay of batteries assembled with Li and Zn electrodes. Owing to the unique internal directional channels and abundant redox active sites of covalent organic frameworks (COFs), they can be used to promote uniform deposition of metal ions during stripping/electroplating through interface modification strategies, thereby inhibiting dendrite growth. COFs provide a new perspective in addressing the challenges faced by the anodes of Li metal batteries and Zn ion batteries. This article discusses the stability and types of COFs, and summarizes some novel COF synthesis methods. Additionally, it reviews the latest progress and optimization methods of using COFs for metal anodes to improve battery performance. Finally, the main challenges faced in these areas are discussed. This review will inspire future research on metal anodes in rechargeable batteries.

Unit-cell-thick zeolitic imidazolate framework films for membrane application

Zeolitic imidazolate frameworks (ZIFs) are a subset of metal-organic frameworks with more than 200 characterized crystalline and amorphous networks made of divalent transition metal centres (for example, Zn2+ and Co2+) linked by imidazolate linkers. ZIF thin films have been intensively pursued, motivated by the desire to prepare membranes for selective gas and liquid separations. To achieve membranes with high throughput, as in ångström-scale biological channels with nanometre-scale path lengths, ZIF films with the minimum possible thickness-down to just one unit cell-are highly desired. However, the state-of-the-art methods yield membranes where ZIF films have thickness exceeding 50 nm. Here we report a crystallization method from ultradilute precursor mixtures, which exploits registry with the underlying crystalline substrate, yielding (within minutes) crystalline ZIF films with thickness down to that of a single structural building unit (2 nm). The film crystallized on graphene has a rigid aperture made of a six-membered zinc imidazolate coordination ring, enabling high-permselective H2 separation performance. The method reported here will probably accelerate the development of two-dimensional metal-organic framework films for efficient membrane separation.

Three in One: Superoleophilic, Chemically and Mechanically Resistant ZIF-7 and ZIF-11 Percolation Networks for Selective Permeation of Oils and Chlorinated Solvents

Imbuing superwetting functions to organic-inorganic hybrid networks displaying chemical resistance, self-cleaning ability, and selective permeation of liquids has received increasing attention in recent years. Here we report superhydrophobic ZIF-7 and ZIF-11 on multilayer fluorinated graphene (FG) nanosheets with long-lasting water-repellent features. By exploring the solution processing of these chemically resistant dispersions, superoleophilic FG-ZIF-7 stainless steel mesh (FG-ZIF-7-SSM) and FG-ZIF-11 over cotton cloth (FG-ZIF-11-CC) possessing superior adhesion were fabricated. These permselective oil-liking prototypes were explored toward mesitylene and crude oil pickup from chemically harsh marine conditions such as seawater, acidic water, and alkaline water, with a separation efficiency of 96-94% up to 10 cycles. Furthermore, using an FG-ZIF-11-CC-wrapped glass pipet, upward diffusion of chloroform from sea, acidic, and alkaline water in 45 s was demonstrated with a separation efficacy of 94% up to 20 cycles. In addition to the chemical resistance and reusability, the mechanical stability of FG-ZIF-7-SSM and FG-ZIF-11-CC was investigated through folding, tape peeling, and dragging through sandpaper up to 250 cycles, showing no signs of changes in the hydrophobic responses. This research sheds light on the application of physiochemically resistant percolation coatings based on fluorinated graphene multilayers supporting ZIF-7 and ZIF-11 toward oil/water separation.

Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe₂O₃/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (η_j=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔE_OER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kg_Zn^-1 (∼290 mW h cm^-2), an excellent power density of 148 mW cm^-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO₂ catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kg_total mass^-1 (106.5 μW h cm^-2) and an outstanding specific power of 9.8 kW kg_total mass^-1 (24.5 mW cm^-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.

High-energy-density flexible graphene-based supercapacitors enabled by atypical hydroquinone dimethyl ether

Supercapacitor is an electrochemical energy-storage technology that can meet the green and sustainable energy needs of the future. However, a low energy density was a bottleneck that limited its practical application. To overcome this, we developed a heterojunction system composed of two-dimensional (2D) graphene and hydroquinone dimethyl ether- an atypical redox-active aromatic ether. This heterojunction displayed a large specific capacitance (Cs) of 523 F g^-1 at 1.0 A g^-1, as well as good rate capability and cycling stability. When assembled in symmetric and asymmetric two-electrode configuration, respectively, supercapacitors can work in voltage windows of 0 ∼ 1.0 V and 0 ∼ 1.6 V, accordingly, and exhibited attractive capacitive characteristics. The best device can deliver an energy density of 32.4 Wh Kg^-1 and a power density of 8000 W Kg^-1, and suffered a small capacitance degradation. Additionally, the device showed low self-discharge and leakage current behaviors during long time. This strategy may inspire exploration of aromatic ether electrochemistry and pave a way to develop electrical double-layer capacitance (EDLC)/pseudocapacitance heterojunctions to boost the critical energy density.

Three-dimensional graphene/metal-organic framework composites for electrochemical energy storage and conversion

Three-dimensional graphene (3DG)/metal-organic framework (MOF)-based composites have attracted more and more attention in the field of energy due to their unique hierarchical porous structure and properties. The combination of graphene with MOFs can not only effectively overcome the limitations of poor electrical conductivity and low stability of MOFs, but also prevent the aggregation and reaccumulation between graphene sheets. Moreover, 3DG/MOF composites can also be used as multifunctional precursors with adjustable structures and composition of derivatives, thus expanding their applications in the field of electrochemistry. This feature article elaborates the latest synthesis methods of 3DG/MOF composites and their derivatives, along with their applications in batteries, supercapacitors (SCs) and electrocatalysis. In addition, the current challenges and future prospects of 3DG/MOF-based composites are discussed.

Metal-Organic Framework-Based Materials in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are promising for large-scale energy storage systems due to their high safety, large capacity, cost-effectiveness, and environmental friendliness. However, their commercialization is currently hindered by several challenging issues, including cathode degradation and zinc dendrite growth. Recently, metal-organic frameworks (MOFs) and their derivatives have gained significant attention and are widely used in AZIBs due to their highly porous structures, large specific surface area, and ability to design frameworks for Zn²⁺ shuttle. Based on preceding contributions, this review aims to generalize two design principles for MOF-based materials in AZIBs: cathode preparation and anode protection. For cathode preparation, we mainly introduce novel MOF-based electrode materials such as pure MOFs, porous carbon materials, metal oxides, and their compounds, focusing on the analysis of the specific capacity of AZIBs. For anode protection, we systematically analyze MOF-based materials used as 3D Zn architecture, solid electrolyte interfaces, novel separators, and solid-state electrolytes, highlighting the improvement in the cyclic stability of Zn anodes. Finally, we propose the future development of MOF-based materials in AZIBs. Our work can give some clues for raising the practical application level of aqueous ZIBs.

Metal-Organic Framework Composites and Their Derivatives as Efficient Electrodes for Energy Storage Applications: Recent Progress and Future Perspectives

Metal-organic frameworks (MOFs) have been important electrochemical energy storage (EES) materials because of their rich species, large specific surface area, high porosity and rich active sites. Nevertheless, the poor conductivity, low mechanical and electrochemical stability of pristine MOFs have hindered their further applications. Although single component MOF derivatives have higher conductivity, self-aggregation often occurs during preparation. Composite design can overcome the shortcomings of MOFs and derivatives and create synergistic effects, resulting in improved electrochemical properties for EES. In this review, recent applications of MOF composites and derivatives as electrodes in different types of batteries and supercapacitors are critically discussed. The advantages, challenges, and future perspectives of MOF composites and derivatives have been given. This review may guide the development of high-performance MOF composites and derivatives in the field of EES.

Fabrication of nanosheet-assembled hollow copper-nickel phosphide spheres embedded in reduced graphene oxide texture for hybrid supercapacitors

Owing to their metalloid characteristics with high electrical conductivity, transition metal phosphides (TMPs) have attracted considerable research attention as prospective cathodes for hybrid supercapacitors. Unfortunately, they usually exhibit low rate performance as well as poor longevity, which does not meet the demands of hybrid supercapacitors. The nanocomposite constructed from reduced graphene oxide (rGO) and TMPs with a highly porous nature can effectively overcome the above-mentioned issues, greatly widening their utilization. In this work, we fabricated nanosheet-assembled hollow copper-nickel phosphide spheres (NH-CNPSs) by the controllable phosphatizing of copper-nickel-ethylene glycol (CN-EG) precursors. Then, porous NH-CNPSs were embedded in rGO texture (NH-CNPS-rGO) to form a unique porous nanoarchitecture. The obtained NH-CNPS-rGO has several advantages benefiting as the cathode electrode, such as (i) the hollow structure as well as porous nanosheets are conducive to fast electrolyte diffusion, (ii) the electrical conductivity of NH-CNPS is further enhanced when coupled with the rGO texture, hence promoting electron transfer in the whole structure, (iii) wrapping NH-CNPSs within the rGO texture endows the nanocomposite with much better structural stability, resulting in longer durability of the electrode, And (iv) the porous structures generated in the nanocomposite provide a perfect space for reducing the mass transfer resistance and accessing the electrolyte, thereby boosting the reaction kinetics. The tests demonstrated that the optimal NH-CNPS-rGO electrode revealed a capacity of up to 1075 C g^-1, a superior rate capacity, and exceptional longevity of 94.7%. Moreover, a hybrid supercapacitor (NH-CNPS-rGO‖AC) equipped with the NH-CNPS-rGO-cathode electrode and activated carbon (AC)-anode electrode represented a satisfactory energy density of 64 W h kg^-1 at 801 W kg^-1 and amazing longevity (91.8% retention after 13 000 cycles), which endorses the promising potential of NH-CNPS-rGO for high-efficiency supercapacitors. This research showcases an appropriate method to engineer hollow TMP-rGO nanocomposites as effective materials for supercapacitors.

3D nanocrystalline metal-organic framework materials for the improved output performance of triboelectric nanogenerators

Triboelectric nanogenerators (TENGs) based on contact electrification and electrostatic induction can effectively convert low-frequency mechanical energy into electrical energy and has attracted considerable attention. However, the low current output performance seriously hinders the wide application of TENGs. Herein, a 3D nanocrystalline metal-organic framework (Cd-MOF) with a specific structure and morphology was reasonably designed as a high-performance triboelectric positive electrode material. The triboelectric test results showed that the maximum instantaneous short-circuit current of Cd-MT was 55.32 μA and the stable output performance maintained a long-term continuous operation for 10 000 s. The peak values of the charge density and electric power density were 102.39 μC m^-2 and 2451.04 mW m^-2, respectively. In addition, the Cd-MT could quickly fully charge commercial capacitors and light a large number of LED lamps. This work provides a new idea for the development and design of functional MOF triboelectric materials.

Catalytic Activation of Hydrogen Peroxide Using Highly Porous Hydrothermally Modified Manganese Catalysts for Removal of Azithromycin Antibiotic from Aqueous Solution

Hydrogen peroxide catalytic activation holds great promise in the treatment of persistent pollutants. In this study, the novel Mn-Acacair/Al, Mn-Acacarg/Al and Mn-BTCarg/Al catalysts, supported on Al2O3, were applied for rapid hydrogen peroxide activation and azithromycin antibiotic removal. The catalysts were prepared by the calcination-hydrothermal method under air or argon atmosphere. The characterization confirmed that the modification of manganese with acetylacetonate and benzene-1,3,5-tricarboxylic acid (H3BTC) O-donor ligands highly improves the catalyst porosity, amorphousity, and abundance of coordinately unsaturated sites, which facilitate the generation of reactive oxygen species. The hydrogen peroxide activation and azithromycin removal reached 98.4% and 99.3% after 40 min using the Mn-BTCarg/Al catalyst with incredible stability and reusability. Only a 5.2% decrease in activity and less than 2% manganese releasing in solutions were detected after five regeneration cycles under the optimum operating conditions. The removal intermediates were identified by LC-MS/MS analysis, and the pathways were proposed. The hydroxylation and decarboxylation reactions play a key role in the degradation reaction.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Iron carbide nanoparticles supported on an N-doped carbon porous framework as a bifunctional material for electrocatalytic oxygen reduction and supercapacitors

Highly active and durable bifunctional materials are of pivotal importance for energy conversion and storage devices, yet a comprehensive understanding of their geometric and electronic influence on electrochemical activity is urgently needed. Fe-N-C materials with physical and chemical structural merits are considered as one of the promising candidates for efficient oxygen reduction reaction electrocatalysts and supercapacitor electrodes. Herein, Fe₃C nanoparticles supported on a porous N-doped carbon framework (denoted as Fe₃C/PNCF) were readily prepared by one-step chemical vapor deposition under the assistance of a NaCl salt template. The experiment results revealed that the as-synthesized Fe₃C/PNCF nanocomposites successfully displayed attractive electrocatalytic oxygen reduction reaction (ORR) activity comparable to that of the Pt/C catalyst (E_1/2 of 0.84 V and 0.83 V, respectively), and a superior capacitance of 385.3 F g^-1 under 1 A g^-1 for a supercapacitor. It's proposed that the increased pyridinic and graphitic N coordination on the hydrophilic porous framework provides more electrochemical active surface area for the storage and transport of electrolyte ions. Additionally, an appropriate d-band center created by the optimized adsorption function endows Fe₃C/PNCF with excellent electrochemical properties. The results confirmed that the integration strategy of porous heterogeneous structure and accessible active sites balanced the complex relationship between geometry, electronic structure, and electrochemical activity. Our research provides a facile approach for fabricating multi-functional nanomaterials applicable in both ORR and supercapacitors in the future.

Strategies, advances, and challenges associated with the use of graphene-based nanocomposites for electrochemical biosensors

Graphene is an intriguing two-dimensional honeycomb-like carbon material with a unique basal plane structure, charge carrier mobility, thermal conductivity, wide electrochemical spectrum, and unusual physicochemical properties. Therefore, it has attracted considerable scientific interest in the field of nanoscience and bionanotechnology. The high specific surface area of graphene allows it to support high biomolecule loading for good detection sensitivity. As such, graphene, graphene oxide (GO), and reduced GO are excellent materials for the fabrication of new nanocomposites and electrochemical sensors. Graphene has been widely used as a chemical building block and/or scaffold with various materials to create highly sensitive and selective electrochemical sensing microdevices. Over the past decade, significant advancements have been made by utilizing graphene and graphene-based nanocomposites to design electrochemical sensors with enhanced analytical performance. This review focus on the synthetic strategies, as well as the structure-to-function studies of graphene, electrochemistry, novel multi nanocomposites combining graphene, limit of detection, stability, sensitivity, assay time. Finally, the review describes the challenges, strategies and outlook on the future development of graphene sensors technology that would be usable for the internet of things are also highlighted.

Updated results on the integration of metal-organic framework with functional materials toward n-alkane for latent heat retention and reliability

Phase change composites are in high demand in thermal management systems. Various supporting materials, including nanocomposites, have been employed to develop shape-stable phase change materials (PCMs). As the reliability of most composite materials has mostly been studied right after the preparation with specific thermal cycling measurements, it is difficult to analyze the long-term leakage-resistance capability and energy retention capacity. Additionally, achieving multifunctional phase change composites is a significant challenge for single supporting materials. Herein, we provide a follow-up report on the thermal performance of hybrid material-supported n-alkane after a storage time of one year and 50 heating/cooling cycles. The interconnected hybrid material composed of a metal-organic framework (MOF) and graphite improved the shape/thermal stability of tetradecane (TD). The as-synthesized MOF/graphite/TD composites exhibited a high latent heat retention capacity of 84.2%, low leakage rate of 1.25%, and high PCM loading capacity, making them suitable for thermal management applications, such as industrial waste heat recovery systems. Furthermore, the intermolecular interactions and capillary forces between the hybrid materials and TD provided high stability and compatibility. Therefore, the as-prepared hybrid material fabricated in this study can be important in the development of multidirectional composite PCMs with comprehensive thermal characteristics.

Coordinately Unsaturated Manganese-Based Metal-Organic Frameworks as a High-Performance Cathode for Aqueous Zinc-Ion Batteries

The slow Zn²⁺ intercalation/deintercalation kinetics in cathodes severely limits the electrochemical performance of aqueous zinc-ion batteries (ZIBs). Herein, we demonstrate a new kind of coordinately unsaturated manganese-based metal-organic framework (MOF) as an advanced cathode for ZIBs. Coordination unsaturation of Mn is performed with oxygen atoms of two adjacent -COO^-. Its proper unsaturated coordination degree guarantees the high-efficiency Zn²⁺ transport and electron exchange, thereby ensuring high intrinsic activity and fast electrochemical reaction kinetics during repeated charging/discharging processes. Consequently, this MOF-based electrode possesses a high capacity of 138 mAh g^-1 at 100 mA g^-1 and a long life span (93.5% capacity retention after 1000 cycles at 3000 mA g^-1) due to the above advantages. Such distinct Zn²⁺ ion storage performance surpasses those of most of the recently reported MOF cathodes. This concept of adjusting the coordination degree to tune the energy storage capability provides new avenues for exploring high-performance MOF cathodes in aqueous ZIBs.

An Electrically Conducting Li-Ion Metal-Organic Framework

Metal-organic frameworks (MOFs) have emerged as an important, yet highly challenging class of electrochemical energy storage materials. The chemical principles for electroactive MOFs remain, however, poorly explored because precise chemical and structural control is mandatory. For instance, no anionic MOF with a lithium cation reservoir and reversible redox (like a conventional Li-ion cathode) has been synthesized to date. Herein, we report on electrically conducting Li-ion MOF cathodes with the generic formula Li₂-M-DOBDC (wherein M = Mg²⁺ or Mn²⁺; DOBDC^4- = 2,5-dioxido-1,4-benzenedicarboxylate), by rational control of the ligand to transition metal stoichiometry and secondary building unit (SBU) topology in the archetypal CPO-27. The accurate chemical and structural changes not only enable reversible redox but also induce a million-fold electrical conductivity increase by virtue of efficient electronic self-exchange facilitated by mix-in redox: 10^-7 S/cm for Li₂-Mn-DOBDC vs 10^-13 S/cm for the isoreticular H₂-Mn-DOBDC and Li₂-Mg-DOBDC, or the Mn-CPO-27 compositional analogues. This particular SBU topology also considerably augments the redox potential of the DOBDC^4- linker (from 2.4 V up to 3.2 V, vs Li⁺/Li⁰), a highly practical feature for Li-ion battery assembly and energy evaluation. As a particular cathode material, Li₂-Mn-DOBDC displays an average discharge potential of 3.2 V vs Li⁺/Li⁰, demonstrates excellent capacity retention over 100 cycles, while also handling fast cycling rates, inherent to the intrinsic electronic conductivity. The Li₂-M-DOBDC material validates the concept of reversible redox activity and electronic conductivity in MOFs by accommodating the ligand's noncoordinating redox center through composition and SBU design.

Interface engineering and integration of two-dimensional polymeric and inorganic materials for advanced hybrid structures

Recent progress and future directions in the creation of hybrid structures based on 2D polymers and inorganic 2D materials are discussed.