Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

One-Pot Synthesis of a Mixed-Valent Copper(I/II)-Coordinated Covalent Organic Framework Induced by γ-Ray Radiation

Metal-anchored covalent organic frameworks (COFs), as a class of significant derivatives of COFs, are widely used as heterogeneous catalysts in diverse chemical reactions. However, they are typically synthesized via post-treatment strategies, which often lead to the decline of COF crystallinity, decrease of porous properties, instability in catalytic performances, generation of additional chemical waste, and consumption of excess time and energy. In this work, we demonstrate an approach to construct a metal-functionalized COF via a one-pot method induced by γ-ray radiation. Specifically, copper-coordinated COF was in situ synthesized by irradiating a mixture of monomers and copper salt under ambient conditions. Interestingly, the initial Cu2+ ions were reduced to Cu+ ions by the radiation-generated reducing species, affording a unique mixed-valent copper(I/II)-coordinated COF. Additionally, the copper-coordinated COF displayed enhanced crystallinity and porous properties compared to those of the parent COF, displaying an opposite trend to the postsynthetic method. Notably, the introduced copper on the COF skeleton endowed the parent COF with catalytic ability. The resulting copper-coordinated COF exhibited remarkable catalytic performances in the reduction of 4-nitrophenol to 4-aminophenol and maintained almost unchanged catalytic performance after five catalytic cycles.

COF/In2S3 S-Scheme Photocatalyst with Enhanced Light Absorption and H2O2-Production Activity and fs-TA Investigation

Photocatalytic hydrogen peroxide (H2O2) synthesis from water and O2 is an economical, eco-friendly, and sustainable route for H2O2 production. However, single-component photocatalysts are subjected to limited light-harvesting range, fast carrier recombination, and weak redox power. To promote photogenerated carrier separation and enhance redox abilities, an organic/inorganic S-scheme photocatalyst is fabricated by in situ growing In2S3 nanosheets on a covalent organic framwork (COF) substrate for efficient H2O2 production in pure water. Interestingly, compared to unitary COF and In2S3, the COF/In2S3 S-scheme photocatalysts exhibit significantly larger light-harvesting range and stronger visible-light absorption. Partial density of state calculation, X-ray photoelectron spectroscopy, and femtosecond transient absorption spectroscopy reveal that the coordination between In2S3 and COF induces the formation of mid-gap hybrid energy levels, leading to smaller energy gaps and broadened absorption. Combining electron spin resonance spectroscopy, radical-trapping experiments, and isotope labeling experiments, three pathways for H2O2 formation are identified. Benefited from expanded light-absorption range, enhanced carrier separation, strong redox power, and multichannel H2O2 formation, the optimal composite shows an impressive H2O2-production rate of 5713.2 µmol g-1 h-1 in pure water. This work exemplifies an effective strategy to ameliorate COF-based photocatalysts by building S-scheme heterojunctions and provides molecular-level insights into their impact on energy level modulation.

Enhanced protonation ability of covalent organic frameworks via N,O-bidentate chelation for photocatalytic H2 evolution

Inspired by the bidentate coordination chemistry of metal ions, we incorporated hydroxyl (OH) and methoxy (OMe) groups into the skeleton of imine-linked COFs to improve their protonation ability via intramolecular hydrogen bonds (O-H⋯NC). In comparison with the pristine COFs possessing monodentate nitrogen coordination sites, OH and OMe functionalized COFs with (N,O)-bidentate chelating sites exhibited up to 13.8 times faster photocatalytic hydrogen evolution rates (HERs).

Metallocavitins as Advanced Enzyme Mimics and Promising Chemical Catalysts

The supramolecular approach is becoming increasingly dominant in biomimetics and chemical catalysis due to the expansion of the enzyme active center idea, which now includes binding cavities (hydrophobic pockets), channels and canals for transporting substrates and products. For a long time, the mimetic strategy was mainly focused on the first coordination sphere of the metal ion. Understanding that a highly organized cavity-like enzymatic pocket plays a key role in the sophisticated functionality of enzymes and that the activity and selectivity of natural metalloenzymes are due to the effects of the second coordination sphere, created by the protein framework, opens up new perspectives in biomimetic chemistry and catalysis. There are two main goals of mimicking enzymatic catalysis: (1) scientific curiosity to gain insight into the mysterious nature of enzymes, and (2) practical tasks of mankind: to learn from nature and adopt from its many years of evolutionary experience. Understanding the chemistry within the enzyme nanocavity (confinement effect) requires the use of relatively simple model systems. The performance of the transition metal catalyst increases due to its retention in molecular nanocontainers (cavitins). Given the greater potential of chemical synthesis, it is hoped that these promising bioinspired catalysts will achieve catalytic efficiency and selectivity comparable to and even superior to the creations of nature. Now it is obvious that the cavity structure of molecular nanocontainers and the real possibility of modifying their cavities provide unlimited possibilities for simulating the active centers of metalloenzymes. This review will focus on how chemical reactivity is controlled in a well-defined cavitin nanospace. The author also intends to discuss advanced metal–cavitin catalysts related to the study of the main stages of artificial photosynthesis, including energy transfer and storage, water oxidation and proton reduction, as well as highlight the current challenges of activating small molecules, such as H2O, CO2, N2, O2, H2, and CH4.

Ion-in-Conjugation: A Promising Concept for Multifunctional Organic Semiconductors

Most organic semiconductors (OSCs) consist of conjugated skeletons with flexible peripheral chains. Their weak intermolecular interactions from dispersion and induction forces result in environmental susceptibilities and are unsuitable for many multifunctional applications where direct exposure to external environments is unavoidable, such as gas absorption, chemical sensing, and catalysis. To exploit the advantages of inorganic semiconductors in OSCs, ion-in-conjugation (IIC) materials are proposed. An IIC material refers to any conjugated material (molecules, polymers, and crystals) in Kekule's structural formula containing stoichiometric ionic states in its conjugated backbone in the electronic ground state. In this review, the definitions, structures, synthesis, properties, and applications of IIC materials are described briefly. Four types of IIC material, including zwitterionic conjugated molecules/polymers, conjugated ionic dyes, π-d conjugated molecules and polymers, and coordinatively doped polymers, are reported. Their applications in gas sensing, humidity sensing, resistive memory devices, and thermal/photo-/electro-catalysis are demonstrated. The challenges and opportunities for future research are also discussed. It is expected that this work will inspire the design of new organic electronic information materials.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Metallocavitins as Promising Industrial Catalysts: Recent Advances

The energy, material, and environmental problems of society require clean materials and impose an urgent need to develop effective chemical processes for obtaining and converting energy to ensure further sustainable development. To solve these challenges, it is necessary, first of all, to learn solar energy harvesting through the development of artificial photosynthesis. In our planet, water, carbon dioxide, and methane are such affordable and inexhaustible clean materials. Electro/photocatalytic water splitting, and also CO₂ and CH₄ transforming into valuable products, requires the search for relevant efficient and selective processes and catalysts. Of great interest is the emerging new generation of bioinspired catalysts—metallocavitins (MCs). MCs are attracting increasing attention of researchers as advanced models of metalloenzymes, whose efficiency and selectivity are well known. The primary field of MC application is fine organic synthesis and enantioselective catalysis. On the other hand, MCs demonstrate high activity for energy challenging reactions involving small gas molecules and high selectivity for converting them into valuable products. This mini-review will highlight some recent advances in the synthesis of organic substances using MCs, but its main focus will be on the rapid development of advanced catalysts for the activation of small molecules, such as H₂O, CO₂, and CH₄, and the prospects for creating related technological processes in the future.

A facile and scalable synthetic method for covalent organic nanosheets: ultrasonic polycondensation and photocatalytic degradation of organic pollutants

Covalent organic framework nanosheets (COF NSs or CONs), as compared to their bulk counterparts two-dimensional (2D) covalent organic frameworks (COFs), exhibit superior performance in many aspects due to their fully accessible active sites benefiting from their ultrathin porous 2D structures. The development of a scalable synthetic methodology for CONs is crucial to further exploration of their unique properties and practical applications. Herein, we report an efficient strategy to fabricate ultrathin CONs through direct polycondensation of monomers under ultrasonic treatment and mild conditions. This method is facile and scalable, which is demonstrated by gram-scale synthesis of two ultrathin 2D CONs in several hours. Moreover, the as-prepared ultrathin CONs show excellent heterogeneous photocatalytic performance for the degradation of organic pollutants (dyes as representatives), remarkably superior to the bulk COFs prepared from the corresponding monomers under solvothermal conditions. This research provides a new roadmap for the scalable and facile synthesis of ultrathin CONs, which is of paramount importance for fully exploring the tremendous potential of this emerging type of 2D material.

We develop a strategy to efficiently fabricate ultrathin covalent organic framework nanosheets (CONs) through direct polycondensation of monomers under ultrasonic treatment. The CONs exhibit excellent photocatalytic performance for the degradation of organic pollutants.

An imine-linked covalent organic framework for renewable and sensitive determination of antibiotic

Lanthanide-functionalized porous organic materials have been the promising candidates in the chemical and biological sensing. Considering the superior thermal and solvent stability of covalent organic frameworks (COFs), the development of lanthanide ions-functionalized COFs based sensing platform is meaningful, while remains to be a challenge. In this work, a new imine-linked COF which provides suitable coordination sites for Tb³⁺ was constructed via the Schiff base reaction between P-phenylenediamine (Pda) and 2,6-Diformylpyridine (Dfp). Benefiting from its high signal-to-noise, the COF@Tb shows excellent ability to determinate ciprofloxacin (CIP) with a detection limit of 3.01 nM. The measurement can maintain good stability in the presence of potential interference or in actual sample. Being washed with ethanol after each measurement, COF@Tb can be recycled for five times. This work provides a novel alternative strategy for efficient construction of lanthanide-grafted COFs and may promote the development of porous organic materials based chemical sensing.