Design of an electrochemiluminescence detection system through the regulation of charge density in a microchannel

Charge Density-Regulated Microchannel-Based Electrochemiluminescence Sensor for Hydrogen Sulfide Detection with a Highly Efficient Accumulation Strategy

The electrochemiluminescence (ECL) intensity can be regulated by ionic current passing through the microchannel, which broadened the regulation of the ECL sensors. But in the early reported sensors, the electrostatic repulsion and steric hindrance caused few targets to approach the interface of the microchannel driven by concentration difference, which reduced the detection efficiency and prolonged the detection period. In this study, different accumulation strategies, such as a positive electric field and different polarity electric fields, were designed to accumulate targets in the microchannel. The interaction of azide groups and hydrogen sulfide served as a research model. Hydrogen sulfide can react with the negatively charged azide groups in the microchannel surface to produce positively charged amino groups, decreasing the negative charge density of the microchannel and thus altering the ionic current and ECL intensity. The accumulation of hydrogen sulfide at the microchannel tip can increase the collision probability with azide groups to improve the detection efficiency, and the integration of accumulation and reaction can shorten the detection period to 28 min. The hydrogen sulfide concentration on the microchannel tip accumulated by applying different polarity electric fields was 22.3-fold higher than that accumulated by applying a positive electric field. The selected research model broadened the application range of a microchannel-based ECL sensor and confirmed the universality of the microchannel-based ECL sensor.

Highly sensitive biosensor for specific miRNA detection based on cascade signal amplification and magnetic electrochemiluminescence nanoparticles

Herein, magnetic electrochemiluminescence (ECL) nanoparticle Fe3O4@PtPd/Ru(bpy)32+ had been synthesized then been coupled with CRISPR/Cas13a system and Zn2+ dependent DNAzyme to design a novel ECL biosensor for specific detection of microRNA-145 (miRNA). The synthesized multifunctional magnetic nanoluminescent materials Fe3O4@PtPd/Ru(bpy)32+ not only load Ru(bpy)32+ to provide ECL signals, but also can quickly achieve separation and enrichment from complex matrices. In addition, ferrocene (Fc) was used as a quencher in the Ru(bpy)32+/tripropylamine (TPA) system. Fc was modified on DNA bound to Fe3O4@PtPd. Benefited from the highly specific recognition ability of CRISPR/Cas13a, the target miRNA induces CRISPR/Cas13a trans-cleavage to trigger the Zn2+-dependent DNAzyme cyclic cleavage to realize the dual signal amplification. DNA modified by Fc was split by target miRNA-induced cleaving, and then magnetic separation was performed to keep Fc away from the surface of the nanoparticles. Thus, the enhanced ECL signal was obtained to detect miRNA-145. Under optimized conditions, the prepared sensor showed a wide linear range (1 fM to 1 nM) and a low limit of detection (LOD) down to 0.41 fM. Furthermore, it shows excellent selectivity and good reproducibility. The proposed ECL platform has huge potential applications in the development of various sensitive sensors for detecting the other miRNA.

Portable Sensor for Aflatoxin B1 Based on the Regulation of Resistance of a Microchannel Using a Multimeter as Readout

Changes in the charge density on the inner surface of the microchannel can modulate the ion concentration at the tip, thus causing changes in the resistance of the system. In this study, this property is adopted to construct a portable sensor using a multimeter and aflatoxin B1 (AFB1) is used as the model target. Initially, the cDNA/aptamer complex is modified in the microchannel. The inner microchannel surface's charge density is then altered by the recognition of the target, leading to a change in the system's resistance, which can be conveniently monitored using a multimeter. Critical parameters influencing the performance of the system are optimized. Under optimum conditions, the resistance is linearly related to the logarithm of AFB1 concentration in the range of 100 fM-10 nM and the detection limit is 46 fM (S/N = 3). The resistive measurement is separated from the recognition reaction of the target, reducing the matrix interference during the detection process. This sensor boasts high sensitivity and specificity coupled with commendable reproducibility and stability. It is applied to assay the AFB1 content successfully in an actual sample of corn. Moreover, this approach is cost-effective, user-friendly, and highly accurate.

Thermoelectric Nanofluidics Probing Thermal Heterogeneity inside Single Cells

Accurate temperature measurement in one living cell is of great significance for understanding biological functions and regulation. Here, a nanopipet electric thermometer (NET) is established for real-time intracellular temperature measurement. Based on the temperature-controlled ion migration, the temperature change in solution results in altered ion mobilities and ion distributions, which can be converted to the thermoelectric responses of NET in a galvanostatic configuration. The exponential relationship between the voltage and the temperature promises highly sensitive thermoelectric responses up to 11.1 mV K-1, which is over an order of magnitude higher than previous thermoelectric thermometry. Moreover, the NET exhibits superior thermal resolution of 25 mK and spatiotemporal resolution of 100 nm and 0.9 ms as well as excellent stability and reproducibility. Benefiting from these unique features, both thermal fluctuations in steady-state cells and heat generation and dissipation upon drug administration can be successfully monitored, which are hardly achieved by current methods. By using NET, thermal heterogeneities of single cancer cells during immunotherapy were reported first in this work, in which the increased intracellular temperature was demonstrated to be associated with the survival benefit and resistance of cancer cells in immunotherapy. This work not only provides a reliable method for microscopic temperature monitoring but also gains new insights to elucidate the mechanism of immune evasion and therapeutic resistance.

A multi-stimuli-responsive nanochannel inspired by biological disulfide bond

Disulfide bonds exist widely in channel protein and play an essential role in matter exchange and signal transduction (e.g., rhodopsin, canonical transient receptor potential 5 (TRPC5)). The research on disulfide bond in nanochannel is significant for the cognition of their biological functions. However, the fragility of biological channel limits the in-situ study and practical application. Herein, an innovative biologically-inspired artificial nanochannel based on disulfide bond (NCDS) with excellent durability, adjustable surface property is proposed. The constructed NCDS has a multi-response to UV-light, thiol (e.g., cysteine (Cys)) or pH stimulation, and can obtain reversibility after regulation by hydrogen peroxide (H₂O₂) or H⁺. The biomimetic NCDS shows great potential in biosensor and intelligent response design. This study also shines new light to channel protein based on disulfide bond that despite the nanochannel has specificity, it will be modulated by the change of nature environment, such as UV-light and chemical microenvironment (e.g., redox state and pH), which might be the reason of some disease.

Cascade-Gates Guarded Asymmetrical Nanochannel Membrane: An Interference-Free Device for Straightforward Detection of Trace Biomarker in Undiluted Serum

Accurate detection of trace biomarkers in biological samples is a key task in diagnostic testing, but it remains challenging due to the high concentration of other physiologically relevant interferences. This work presents a new electrochemiluminescence (ECL) sensing device based on a bio-inspired nanochannel membrane (NM) guarded with two differential gates. The recognition event at the aptamer gate is followed by the permitting of stimulator transport toward the metal-organic framework (MOF) gate. Proof of concept application is evaluated using cytochrome C (Cytc) as the analyte, and glucose, a commonly existing nutriment as the stimulator. The oxidase-mimic plasmonic nanoparticles induce an effective release of ECL luminophore from the MOF gate. This cascade-gates guarded NM can effectively separate biological matrices from the detection cell. Consequently, the proposed system can achieve direct sensing of 1.0 nm Cytc in undiluted serum within the threshold concentrations of leukemia and lymphoma, making it attractive for point-of-care applications.

Strategies for Enhancing the Sensitivity of Electrochemiluminescence Biosensors

Electrochemiluminescence (ECL) has received considerable attention as a powerful analytical technique for the sensitive and accurate detection of biological analytes owing to its high sensitivity and selectivity and wide dynamic range. To satisfy the growing demand for ultrasensitive analysis techniques with high efficiency and accuracy in complex real sample matrices, considerable efforts have been dedicated to developing ECL strategies to improve the sensitivity of bioanalysis. As one of the most effective approaches, diverse signal amplification strategies have been integrated with ECL biosensors to achieve desirable analytical performance. This review summarizes the recent advances in ECL biosensing based on various signal amplification strategies, including DNA-assisted amplification strategies, efficient ECL luminophores, surface-enhanced electrochemiluminescence, and ratiometric strategies. Sensitivity-enhancing strategies and bio-related applications are discussed in detail. Moreover, the future trends and challenges of ECL biosensors are discussed.

Enhanced Sensing Performance of a Microchannel-Based Electrochemiluminescence Biosensor for Adenosine Triphosphate via a dsDNA Superstructure Amplification Strategy

The sensing performance of a microchannel-based electrochemiluminescence (ECL) biosensor is related to the change ratio of charge density on the surface of microchannels caused by a target recognition reaction. In this study, adenosine triphosphate (ATP) served as a model target. The dsDNA superstructures containing a capture probe (CP, containing an ATP aptamer sequence) and alternating units of ssDNA probes of P1 and P2, CP/(P1/P2)_n, were grafted onto the inner wall of microchannels first. The CP in dsDNA superstructures captured ATP molecules, causing the release of dsDNA fragments containing alternating units of P1 and P2, (P1/P2)_n. The target recognition reaction significantly changed the charge density of microchannels, which altered the ECL intensity of the (1,10-phenanthroline)ruthenium(II)/tripropylamine system in the reporting interface. The ECL intensity of the constructed system had a linear relationship with the logarithm of ATP concentration ranging from 1 fM to 100 pM with a detection limit of 0.32 fM (S/N = 3). The biosensor was successfully applied to detect ATP in rat brains.

Conductive Covalent Organic Frameworks with Conductivity- and Pre-Reduction-Enhanced Electrochemiluminescence for Ultrasensitive Biosensor Construction

Covalent organic frameworks (COFs) have attracted widespread attention in the electrochemiluminescence (ECL) field owing to their high load capacity of ECL luminophores and porous structures, but their ECL performance is still limited by the intrinsic poor conductivity (generally <10^-8 S m^-1). To address this shortcoming, we used 2,3,6,7,10,11-hexaaminotriphenylene (HATP) and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) to synthesize a conductive COF (HHTP-HATP-COF, conductivity = 3.11 × 10^-4 S m^-1). Compared with HATP, HHTP, and low-conductive HHTP-DABZ-COF, HHTP-HATP-COF exhibited superior ECL performance, not only because HHTP-HATP-COF possessed massive ECL luminophores but also because its conductive porous framework accelerated charge transport in the whole framework and improved the utilization ratio of ECL luminophores. More interestingly, the ECL intensity of the HHTP-HATP-COF/S₂O₈^2- system was further improved after pre-reduction electrolysis due to the accumulation of HHTP-HATP-COF cation radicals. The experimental results showed that the ECL intensity of the HHTP-HATP-COF/S₂O₈^2- system after pre-reduction was about 1.64-, 3.96-, 6.88-, and 8.09-fold higher than those of HHTP-HATP-COF/S₂O₈^2-, HHTP-DABZ-COF/S₂O₈^2-, HHTP/S₂O₈^2-, and HATP/S₂O₈^2- systems, respectively. Considering the superior ECL property of the HHTP-HATP-COF/S₂O₈^2- system after pre-reduction, it was used as a high-efficient ECL beacon together with an aptamer/protein proximity binding-induced three-dimensional bipedal DNA walker to construct an ultrasensitive biosensor for thrombin detection, which displayed broad linearity (100 aM to 1 nM) with a detection limit of 62.1 aM. Overall, the work offered effective ways to increase ECL performance by the enhancement of conductivity and by the pre-reduction, proposing new ideas to design high-efficiency COF-based ECL materials and endowing conductive COFs with ECL biosensor application for the first time.

Electrochemiluminescence Aptasensor for Charged Targets through the Direct Regulation of Charge Density in Microchannels

The change of surface charge density can cause many changes in physical or chemical properties and has been applied to design many sensitive sensors. Ochratoxin A (OTA) is a negatively charged target in neutral or alkaline solutions. In this work, a microchannel-based electrochemiluminescence (ECL) aptasensor for OTA detection based on this character had been designed. The charged target directly combined with functionalization layers of the microchannels, which caused surface charge density variation and therefore resulted in the change of ECL intensity of the (1,10-phenanthroline)ruthenium(II)/tripropylamine system. The decrease of ECL intensity is linearly dependent on OTA concentration ranging from 0.5 to 4 ng mL^-1 with a detection limit down to 0.17 ng mL^-1. This strategy has the advantages of simple interface chemistry design and universality, which offers a guiding significance for the charged target assay.