An Imidazoacridine-Based TADF Material as Effective Organic Photosensitizer for Visible-Light-Promoted [2+2] Cycloaddition

Photophysical properties of three-coordinate heteroleptic Cu(I) β-diketiminate triarylphosphine complexes

A series of heteroleptic copper(I) β-diketiminate triarylphosphine complexes is reported, having the general formula Cu(R1NacNacR2)(PPhX3), where R1NacNacR2 is a substituted β-diketiminate and PPhX3 is a triphenylphosphine derivative. A total of five different R1NacNacR2 ligands and three different triarylphosphines are used to assemble the nine complexes. The syntheses, X-ray crystal structures, cyclic voltammograms, and UV-vis absorption spectra of all compounds are described. Whereas most of the compounds are weakly luminescent or only luminesce at 77 K, the four complexes with the more sterically encumbered β-diketiminate ligands, with methyl or isopropyl substituents at the 2- and 6-positions of the N-phenyl rings, exhibit weak room-temperature photoluminescence with peaks between 519 and 566 nm and long excited-state lifetimes in the range of 15-70 μs. The sterically encumbering substituents in this subset have subtle effects on the UV-vis absorption maximum, which red shifts slightly as the steric bulk increases, as well as significant effects on the photoluminescence lifetime, which is observed to increase as the steric bulk is augmented. Substituents on the triarylphosphine also influence the excited-state dynamics in the bulky complexes, with the more electron-rich tris(4-methoxyphenyl)phosphine (PPhOMe3) giving longer-excited-state lifetimes compared to triphenylphosphine (PPh3) when the same R1NacNacR2 ligand is used.

The Golden Age of Thermally Activated Delayed Fluorescence Materials: Design and Exploitation

Since the seminal report by Adachi and co-workers in 2012, there has been a veritable explosion of interest in the design of thermally activated delayed fluorescence (TADF) compounds, particularly as emitters for organic light-emitting diodes (OLEDs). With rapid advancements and innovation in materials design, the efficiencies of TADF OLEDs for each of the primary color points as well as for white devices now rival those of state-of-the-art phosphorescent emitters. Beyond electroluminescent devices, TADF compounds have also found increasing utility and applications in numerous related fields, from photocatalysis, to sensing, to imaging and beyond. Following from our previous review in 2017 ( Adv. Mater. 2017, 1605444), we here comprehensively document subsequent advances made in TADF materials design and their uses from 2017-2022. Correlations highlighted between structure and properties as well as detailed comparisons and analyses should assist future TADF materials development. The necessarily broadened breadth and scope of this review attests to the bustling activity in this field. We note that the rapidly expanding and accelerating research activity in TADF material development is indicative of a field that has reached adolescence, with an exciting maturity still yet to come.

An Organic EnT Photocatalyst 4CzMeBN and the Application in the Synthesis of cis-Fused Azetidines

A powerful EnT photocatalyst 4CzMeBN has been developed and utilized in the synthesis of cis-fused azetidines via dearomative [2+2] cycloaddition under visible light. The photocatalyst 4CzMeBN is a donor-acceptor cyanoarene and features high triplet state energy and long lifetime of triplet state, which would be an alternative to widely used EnT photocatalyst Ir[dF(CF3)ppy]2(dtbbpy)PF6. The photochemical [2+2] cycloaddition provides a facile method to synthesize valuable dihydroisoquinolone-fused azetidines with high efficiency.

Reversible Nucleophilic Ring-Opening of Tetraoxapentacene Derivatives: Accessing New Materials for Thermally Activated Delayed Fluorescence

We report the unexpected nucleophilic ring-opening reaction of electron deficient dioxins in the presence of carbazole under basic conditions. This nucleophilic ring-opening reaction is reversible under basic conditions in the absence of nucleophiles. Further, we demonstrate that this unexpected reactivity can be used to prepare novel donor-acceptor compounds that are emissive in solution and as thin films and exhibit thermally activated delayed fluorescence (TADF).

Visible-Light-Induced Dearomative Annulation of Indoles toward Stereoselective Formation of Fused- and Spiro Indolines

Dearomatization approaches are attractive for their abilities to transform simple, planar arenes into complex, three-dimensional architectures. In particular, visible-light driven dearomatization strategies are significant because of their mild, green, and sustainable nature, enabling the fabrication of new chemical bonds via an electron transfer or energy transfer process. Indole compounds, being potentially bioactive and readily accessible, can be employed efficiently as building blocks for constructing diverse annulated frameworks under photocatalysis. Highly stereoselective radical cascade reactions of appropriate indole systems can provide complex cyclic scaffolds bearing multiple stereocenters. In fact, the past few years have witnessed the renaissance of dearomative cycloadditions of indoles via visible-light-induced photocatalysis. The present review highlights recent advances (2019-mid 2024) in visible-light-driven dearomative annulation of indoles leading to formation of polycyclic indolines, including angularly fused and spiro indolines. Most of the reactions described in this review are simple, providing quick access to the desired products. Additionally, characteristic reaction mechanisms are offered to provide an understand of how indole scaffolds show distinctive reactivity under photocatalytic conditions.

Organic Donor-Acceptor Thermally Activated Delayed Fluorescence Photocatalysts in the Photoinduced Dehalogenation of Aryl Halides

We report a family of donor-acceptor thermally activated delayed fluorescent (TADF) compounds based on derivatives of DMAC-TRZ, that are strongly photoreducing. Both Eox and thus E*ox could be tuned via substitution of the DMAC donor with a Hammett series of p-substituted phenyl moieties while Ered remained effectively constant. These compounds were assessed in the photoinduced dehalogenation of aryl halides, and analogues bearing electron withdrawing groups were found to produce the highest yields. Substrates of up to Ered=-2.72 V could be dehalogenated at low PC loading (1 mol %) and under air, conditions much milder than previously reported for this reaction. Spectroscopic and chemical studies demonstrate that all PCs, including literature reference PCs, photodegrade, and that it is these photodegradation products that are responsible for the reactivity.

Photocatalyzed C3-H Nitrosylation of Imidazo[1,2-a]pyridine under Continuous Flow and External Photocatalyst-, Oxidant-, and Additive-Free Conditions

This study reports a protocol for the highly regioselective photocatalyzed C-H nitrosylation of imidazo[1,2-a]pyridine scaffolds at the C3 position under a combination of visible-light irradiation and continuous flow without any external photocatalyst. This protocol involves mild and safe conditions and shows good tolerance to air and water along with excellent functional group compatibility and site selectivity, generating various 3-nitrosoimidazo[1,2-a]pyridines in excellent yields under photocatalyst-, oxidant-, and additive-free conditions.Notably, the proposed nitrosylation reaction, which introduces the chromophore NO into imidazo[1,2-a]pyridine scaffolds, occurs efficiently under visible-light irradiation without any additional photocatalyst owing to the intense light-absorption characteristics of the nitrosylation products. This study could guide future studies on the development of green organic-synthesis strategies with a wide variety of potential applications.

Construction of cyclobutane-fused tetracyclic skeletons via substrate-dependent EnT-enabled dearomative [2+2] cycloaddition of benzofurans (benzothiophenes)/maleimides

Herein, a novel and facile organic photosensitizer (thioxanthone)-mediated energy-transfer-enabled (EnT-enabled) dearomative [2+2] cycloaddition of aromatic heterocycles/maleimides for green synthesis of cyclobutane-fused polycyclic skeletons is reported. Mechanistic investigations revealed that different EnT pathways by triplet thioxanthone were initiated when different aromatic heterocycles participated in the reaction, giving the corresponding excited intermediates, which underwent the subsequent intermolecular [2+2] cycloaddition to access the desired highly functionalized cyclobutane-fused polycyclic skeletons.

Enantioselective Intramolecular ortho Photocycloaddition Reactions of 2-Acetonaphthones

2-Acetonaphthones, which bear an alkenyl group tethered to its C1 carbon atom via an oxygen atom, were found to undergo an enantioselective intramolecular ortho photocycloaddition reaction. A chiral oxazaborolidine Lewis acid leads to a bathochromic absorption shift of the substrate and enables an efficient enantioface differentiation. Visible light irradiation (λ=450 nm) triggers the reaction which is tolerant of various groups at almost any position except carbon atom C8 (16 examples, 53-99 % yield, 80-97 % ee). Consecutive reactions were explored including a sensitized rearrangement to tetrahydrobiphenylenes, which occurred with full retention of configuration. Evidence was collected that the catalytic photocycloaddition occurs via triplet intermediates, and the binding mode of the acetonaphthone to the chiral Lewis acid was elucidated by DFT calculations.

Excited-state dynamics of C3-symmetric heptazine-based thermally activated delayed-fluorescence emitters

Heptazine-based materials have recently emerged as a promising motif for thermally activated delayed fluorescence, as their near-zero or negative singlet-triplet energy gaps enable extremely fast reverse intersystem crossing (rISC) rates. Another method for achieving a high rate of rISC is through the use of highly symmetric emitters, which benefit from energy-level degeneracies and a high density of states. Here, we investigate the effect of combining these two design strategies on the excited-state dynamics of C3-symmetric emitters containing heptazine cores. We find that in two of the four emitters studied, the S1 state has a high degree of locally excited (LE) character with density on the heptazine moiety, preventing excited-state localization and a loss of symmetry in the energy-minimized S1 geometry. Surprisingly, these symmetric molecules still suffer from a loss of density of triplet states below the S1 state. Overall, we find that maintaining C3 symmetry will not necessarily maintain density of states, but that heptazine-based materials with LE S1 states still benefit from maximized rISC rates via increased spin-orbit coupling with low-lying charge-transfer triplet states and exhibit advantageous photophysical properties, such as near-unity photoluminescence quantum yields and high colour purity.

Visible-light-driven enantioselective intermolecular [2 + 2] photocyclization utilizing bathochromic excitation mediated by a chiral phosphoric acid

We report herein an enantioselective intermolecular [2 + 2] photocyclization of alkenyl 2-pyrrolyl ketones using the bathochromic shift mediated by a chiral phosphoric acid. This synthetic method provides access to cyclobutanes with up to 98% ee. According to the UV-Vis spectra, the bathochromic effect was observed by mixing alkenyl 2-pyrrolyl ketones and a chiral phosphoric acid. A non-linear correlation was observed between the ee of the catalyst and the ee of the cycloadduct, suggesting that both substrates bind to the chiral phosphoric acid and form a dimer complex before photocycloaddition.

Modulation of Delayed Fluorescence Guided by Conformational Effect-Mediated Thermally Enhanced Phosphorescence in Phenothiazines-Quinoline-Cl Conjugates

Triplet energy harvesting via thermally activated delayed fluorescence (TADF) from pure organic systems has attracted great attention in organic light-emitting diodes, sensing, and photocatalysis. However, the realization of thermally enhanced phosphorescence (TEP)-guided efficient TADF with a high rate of reverse intersystem crossing (kRISC) still needs to be discovered. Herein, we report two phenothiazine-quinoline conjugates (P2QC, P2QMC) comprising two phenothiazine donors covalently attached to the chlorine-substituted quinolinyl acceptor. Spectroscopic analysis in conjunction with quantum chemistry calculations reveals that TEP in P2QC originated due to slow internal conversion from higher-lying triplet to lowest triplet (T2' → T1') of the quasi-axial (QA) conformer and TADF (kRISC = 1.44 × 108 s-1) originated from the quasi-equatorial (QE) conformer caused by a low singlet-triplet gap (ΔES1-T1 = 0.11 eV) and triplet energy transfer from QA to QE owing to the degenerate ground state of the conformers. In contrast, TADF (kRISC = 0.74 × 108 s-1) and dual phosphorescence under ambient conditions are observed in P2QMC. This study provides a sustainable guideline for developing efficient TADF emitters via conformation effects and energy transfer mechanisms.

Rejuvenation of dearomative cycloaddition reactions via visible light energy transfer catalysis

Dearomative cycloaddition is a powerful technique to access sp3-rich three-dimensional structural motifs from simple flat, aromatic feedstock. The building-up of unprecedentedly diverse polycyclic scaffolds with increased saturation and stereochemical information having various applications ranging from pharmaceutical to material sciences, is an essential goal in organic chemistry. However, the requirement of large energy inputs to disrupt the aromaticity of an arene moiety necessitates harsh reaction conditions for ground state dearomative cycloaddition. The photochemical requirement encompasses use of ultraviolet (UV) light to enable the reaction on an excited potential energy surface. The microscopic reversibility under thermal conditions and the use of high energy harmful UV irradiation in photochemical manoeuvres, however, constrain their widespread use from a synthetic point of view. In this context, the recent renaissance of visible light energy transfer (EnT) catalysis has become a powerful tool to initiate dearomative cycloaddition as a greener and more sustainable approach. The excited triplet state population is achieved by triplet energy transfer from the appropriate photosensitizer to the substrate. While employing mild visible light energy as fuel, the process leverages an enormous potential of excited state reactivity. The discovery of an impressive portfolio of organic and inorganic photosensitizers with a range of triplet energies facilitates visible light photosensitized dearomative cycloaddition of various substrates to form sp3-rich fused polycyclic architectures with diverse applications. The tutorial review comprehensively surveys the reawakening of dearomative cycloadditions via visible light-mediated energy transfer catalysis in the past five years. The progress ranges from intra- and intermolecular [2π + 2π] to [4π + 2π], and ends at intermolecular [2π + 2σ] cycloadditions. Furthermore, the review provides potential possibilities for future growth in the growing field of visible light energy transfer catalysis.

Sterically Encumbered Heteroleptic Copper(I) β-Diketiminate Complexes with Extended Excited-State Lifetimes

One of the main challenges in developing effective copper(I) photosensitizers is their short excited-state lifetimes, usually attributed to structural distortion upon light excitation. We have previously introduced copper(I) charge-transfer chromophores of the general formula Cu(N^N)(ArNacNac), where N^N is a conjugated diimine ligand and ArNacNac is a substituted β-diketiminate ligand. These chromophores were promising regarding their tunable redox potentials and intense visible absorption but were ineffective as photosensitizers, presumably due to short excited-state lifetimes. Here, we introduce sterically crowded analogues of these heteroleptic chromophores with bulky alkyl substituents on the N^N and/or ArNacNac ligand. Structural analysis was combined with electrochemical and photophysical characterization, including ultrafast transient absorption (UFTA) spectroscopy to investigate the effects of the alkyl groups on the excited-state lifetimes of the complexes. The molecular structures determined by single-crystal X-ray diffraction display more distortion in the ground state as alkyl substituents are introduced into the phenanthroline or the NacNac ligand, showing smaller τ4 values due to the steric hindrance. UFTA measurements were carried out to determine the excited-state dynamics. Sterically encumbered Cu5 and Cu6 display excited-state lifetimes 15-20 times longer than unsubstituted complex Cu1, likely indicating that the incorporation of bulky alkyl substituents inhibits the pseudo-Jahn-Teller (PJT) flattening distortion in the excited state. This work suggests that the steric properties of these heteroleptic copper(I) charge-transfer chromophores can be readily modified and that the excited-state dynamics are strongly responsive to these modifications.

Uncovering the Mechanism of Thermally Activated Delayed Fluorescence in Coplanar Emitters Using Potential Energy Surface Analysis

Planarized emitters exhibiting thermally activated delayed fluorescence (TADF) have attracted attention due to their narrow emission spectra, improved photostability, and high quantum yields, but with large singlet-triplet energy gaps (ΔE_ST) and no heavy atoms, the origin of their TADF remains a subject of debate. Here we prepare two isomeric, coplanar donor-acceptor compounds, with HMAT-2PYM performing dual TADF and room-temperature phosphorescence but with HMAT-4PYM exhibiting only prompt fluorescence. Although conventional TADF design principles suggest that neither isomer should exhibit TADF, we reveal differences in the excited state potential energy surfaces that enable spin-flip processes in only one isomer. We also find that hydrogen bonding is absent between the planar units of these emitters, despite earlier claims of intramolecular hydrogen bonding in similar compounds. Overall, this work demonstrates that potential energy surface analysis is a practical strategy for designing coplanar TADF materials that might otherwise be overlooked by conventional TADF design metrics.

Polymer dots and glassy organic dots using dibenzodipyridophenazine dyes as water-dispersible TADF probes for cellular imaging

Fluorescence imaging of living cells is key to better understanding cellular morphology and biological processes. Water-dispersible nanoparticles exhibiting thermally activated delayed fluorescence (TADF) have recently emerged as useful probes for time-resolved fluorescence imaging (TRFI), circumventing interference from biological autofluorescence. Many existing approaches, however, require TADF dyes with specific structural features, precluding many high-performance TADF materials from being used in this application. Here, we describe the synthesis of two TADF emitters based on the rigid and strongly electron-withdrawing dibenzo[a,c]dipyrido[3,2-h:2'-3'-j]phenazine-12-yl (BPPZ) motif, and demonstrate two parallel approaches for the encapsulation of these fluorophores to yield water-dispersible nanoparticles suitable for TRFI. First, fluorescent polymer dots (Pdots) were formed by dye encapsulation within cell-penetrating amphiphilic copolymers. Glassy organic nanoparticles (g-Odots) were also prepared, giving nanoparticles with higher photoluminescence quantum yields and improved colour purity. Both approaches yielded nanoparticles suitable for imaging, with reasonable uptake and cytotoxicity on the timescale of standard imaging experiments using human cervical (HeLa) and liver (HepG2) cancer cell lines. This work demonstrates two flexible strategies for preparing water-dispersible TADF nanoparticles for TRFI, both of which should be readily adaptable to nearly any existing hydrophobic TADF dye.

Moving Beyond Cyanoarene Thermally Activated Delayed Fluorescence Compounds as Photocatalysts: An Assessment of the Performance of a Pyrimidyl Sulfone Photocatalyst in Comparison to 4CzIPN

Carbazolyl dicyanobenzene (CDCB) derivates exhibiting thermally activated delayed fluorescence (TADF) have shown themselves to be excellent photocatalysts over recent years, particularly 4CzIPN, although investigation into organic TADF compounds as photocatalysts outside of the CDCB group has been limited. Herein, we report an alternative donor-acceptor TADF structure, 9,9'-(sulfonylbis(pyrimidine-5,2-diyl))bis(3,6-di-tert-butyl-9H-carbazole), pDTCz-DPmS, for use as a photocatalyst (PC). A comparison of the electrochemical and photophysical properties of pDTCz-DPmS with 4CzIPN in a range of solvents identifies the former as a better ground state reducing agent and photoreductant, while both exhibit similar oxidation capabilities in the ground and excited state. The increased conjugation of pDTCz-DPmS relative to 4CzIPN presents a more intense CT band in the UV-vis absorption spectrum, aiding in the light absorption of this molecule. Prompt and delayed emission lifetimes are observed for pDTCz-DPmS, confirming the TADF nature, both of which are sufficiently long-lived to participate in productive photochemistry. These combined properties make pDTCz-DPmS useful in photocatalysis reactions, covering a range of photoredox oxidative and reductive quenching reactions, as well as those involving a dual Ni(II) cocatalyst, alongside energy transfer processes. The higher triplet energy and increased photostability of pDTCz-DPmS compared with 4CzIPN were found to be advantages of this organic PC.

Aggregation of gold(I) complexes: phosphorescence vs. singlet oxygen production

Herein we report on the synthesis of six new phosphane-gold(I)-4-ethynylaniline complexes (neutral and cationic), with a tris-naphthalene substituted tertiary phosphane bearing a secondary amine as a linker and containing different halogen groups (Cl and Br) in the naphthyl group. We have demonstrated in this work how the careful control of the intermolecular aggregation process can modulate the competition between phosphorescence emission and energy transfer from the triplet state of the gold(I) complexes to produce singlet oxygen.