High performance magnetorheological fluids: very high magnetization FeCo-Fe3O4 nanoclusters in a ferrofluid carrier

High magnetization composite magnetic fluid: structure, magnetorheology and new sealing mechanism in rotating seals

The sealing capacity of magnetofluidic (MF) rotating seals is limited by the highest magnetization of the sealing ferrofluids (FFs) of about 1000 G (80 kA m-1). A sharp, almost an order of magnitude, increase in the supported pressure drop is possible by using a magnetorheological (MR) suspension as sealing fluid, owing to the much higher saturation magnetization of MR fluids compared to FFs. However, rotating seals with MR fluids have several shortcomings, such as a significant increase of the friction torque due to the growth of shear stress in the strong magnetic field specific to MF seals and leakage of the non-magnetic carrier liquid. At least partly, these issues can be avoided by using ferrofluid based extremely bidisperse MR suspensions of micrometer-sized iron (Fe) particles dispersed in a ferrofluid, as sealing fluid. The composite Fe3O4-Fe magnetic fluid used in this study consisted of hundreds of nanometers up to few microns size structures of interconnected (welded) Fe nanoparticles (FeMNPs) dispersed in a high colloidal stability ferrofluid with 500 G (40 kA m-1) saturation magnetization. The volume fraction of iron NPs varies from 0.5 to 15% in the ferrofluid carrier which significantly increases the magnetization and simultaneously produces important changes of flow properties in magnetic field of the resulting composite fluid, from Newtonian to strongly non-Newtonian behavior. The evaluation of the magnetic and magnetorheological behavior includes the dependence of magnetization, effective viscosity, magnetoviscous effect and dynamic yield stress on the volume fraction of Fe nanoparticles dispersed in the ferrofluid carrier. The seal gap filled with interconnected Fe nanospheres consists in randomly distributed microregions with a high intensity and high gradient magnetic field that captures the ferrofluid and provides a new sealing mechanism. Already a small amount of interconnected Fe nanospheres additive (2.5-5.0% volume fraction) produces four times increase of the rotating seal burst pressure, a much higher increase than what can be obtained from using a conventional magnetic fluid with the same magnetization. The nano-composite sealing magnetic fluid proved to be a cost-effective solution to significantly increase the performance of multi-stage rotating MF seals.

Recent Advances in the Development of Drug Delivery Applications of Magnetic Nanomaterials

With the predicted rise in the incidence of cancer, there is an ever-growing need for new cancer treatment strategies. Recently, magnetic nanoparticles have stood out as promising nanostructures for imaging and drug delivery systems as they possess unique properties. Moreover, magnetic nanomaterials functionalized with other compounds can lead to multicomponent nanoparticles with innovative structures and synergetic performance. The incorporation of chemotherapeutic drugs or RNA in magnetic drug delivery systems represents a promising alternative that can increase efficiency and reduce the side effects of anticancer therapy. This review presents a critical overview of the recent literature concerning the advancements in the field of magnetic nanoparticles used in drug delivery, with a focus on their classification, characteristics, synthesis and functionalization methods, limitations, and examples of magnetic drug delivery systems incorporating chemotherapeutics or RNA.

Magnetic Nanoparticles: Current Advances in Nanomedicine, Drug Delivery and MRI

Magnetic nanoparticles (MNPs) have evolved tremendously during recent years, in part due to the rapid expansion of nanotechnology and to their active magnetic core with a high surface-to-volume ratio, while their surface functionalization opened the door to a plethora of drug, gene and bioactive molecule immobilization. Taming the high reactivity of the magnetic core was achieved by various functionalization techniques, producing MNPs tailored for the diagnosis and treatment of cardiovascular or neurological disease, tumors and cancer. Superparamagnetic iron oxide nanoparticles (SPIONs) are established at the core of drug-delivery systems and could act as efficient agents for MFH (magnetic fluid hyperthermia). Depending on the functionalization molecule and intrinsic morphological features, MNPs now cover a broad scope which the current review aims to overview. Considering the exponential expansion of the field, the current review will be limited to roughly the past three years.

Thermal and rheological properties of magnetic nanofluids: Recent advances and future directions

Technological advancement and miniaturization of electronic gadgets fueled intense research on nanofluids as potential candidates for cooling applications as a substitute to conventional heat transfer fluids. Among nanofluids, magnetic nanofluids, traditionally known as ferrofluids have attracted a lot of attention owing to their magnetic field tunable thermal conductivity and rheological properties due to the aggregation of the magnetic nanoparticles into chains or columns in the presence of the magnetic field. The field-induced aggregates act as low resistance pathways thereby improving thermal transport substantially. Recent studies show that ferrofluids with smaller size and narrow size distribution display significant enhancement in thermal conductivity in the presence of a magnetic field with negligible viscosity enhancement, which is ideal for effective thermal management of electronic devices, especially in miniature electronic devices. On the contrary, highly polydisperse ferrofluids containing large aggregates, show modest enhancement in thermal conductivity in the presence of a magnetic field and a huge enhancement in viscosity. The most recent studies show that magnetic field ramp rate has a profound effect on aggregation kinetics and thermal and rheological properties. The viscosity enhancement under an external stimulus impedes their practical use in electronics cooling, which warrants the need to attain a high thermal conductivity to viscosity ratio, under a modest magnetic field. Though there are several reviews on heat transfer in nanofluids and hybrid nanofluids, a comprehensive review on fundamental understanding of field-induced thermal and rheological properties in magnetic fluids is missing in the literature. This review provides a pedagogical description of the fundamental understanding of field-induced thermal and rheological properties in magnetic fluids, with the necessary background, key concepts, definitions, mechanisms, theoretical models, experimental protocols, and design of experiments. Many important case studies are presented along with the experimental design aspects. The review also provides a summary of important experimental studies with key findings, along with the key challenges and future research directions. The review is an ideal material for experimentalists and theoreticians practicing in the field of magnetic fluids, and also serves as an excellent reference for freshers who indent to begin research on this topic.

Ferrofluids and bio-ferrofluids: looking back and stepping forward

Ferrofluids investigated along for about five decades are ultrastable colloidal suspensions of magnetic nanoparticles, which manifest simultaneously fluid and magnetic properties. Their magnetically controllable and tunable feature proved to be from the beginning an extremely fertile ground for a wide range of engineering applications. More recently, biocompatible ferrofluids attracted huge interest and produced a considerable increase of the applicative potential in nanomedicine, biotechnology and environmental protection. This paper offers a brief overview of the most relevant early results and a comprehensive description of recent achievements in ferrofluid synthesis, advanced characterization, as well as the governing equations of ferrohydrodynamics, the most important interfacial phenomena and the flow properties. Finally, it provides an overview of recent advances in tunable and adaptive multifunctional materials derived from ferrofluids and a detailed presentation of the recent progress of applications in the field of sensors and actuators, ferrofluid-driven assembly and manipulation, droplet technology, including droplet generation and control, mechanical actuation, liquid computing and robotics.