Triphenylamine-based small-molecule fluorescent probes

Salicylaldehyde built fluorescent probe for dual sensing of Al3+, Zn2+ ions: Applications in latent fingerprint, bio-imaging & real sample analysis

This Schiff base chemosensor (SNN) detected dual ions, Al3+ and Zn2+ ions selectively. Fluorescence spectrum investigations showed that Al3+ ions increased fluorescence intensity, notably at 493 nm. Introducing Zn2+ ions caused a significant blue shift of roughly ∼65 nm at a wavelength of 434 nm, resulting in a notable change in fluorescence intensity. When binding Al3+/Zn2+ ions, the SNN receptor uses three methods. Inhibition of photoinduced electron transfer (PET), excited state intramolecular proton transfer (ESIPT), and restriction of CN isomerization. The jobs plot method found that SNN + Al3+ and SNN + Zn2+ complexations had a 1:1 stoichiometry. DFT, LC-HRMS, and 1H NMR titration confirm this conclusion. The probe SNN's limit of detection (LOD) for Al3+/Zn2+ ions was 3.99 nM and 1.33 nM. Latent fingerprint (LFP), food samples, pharmaceutical products, and E. coli pathogen bio-imaging have all used the SNN probe to identify Al3+ and Zn2+ ions.

A comparative study of two thienopyrimidine Schiff base probes for sequential monitoring of Ga3+ and Pd2

Two Schiff base probes (S1 and S2) were prepared and synthesized by incorporating thienopyrimidine into salicylaldehyde or 3-ethoxysalicylaldehyde individually, with the aim of detecting Ga3+ and Pd2+ sequentially. Upon chelation with Ga3+, S1 and S2 exhibited fluorescence enhancement in DMSO/H2O buffer. Both S1-Ga3+ and S2-Ga3+ were quenched by Pd2+. The limit of detection for S1 in response to Ga3+ and Pd2+ was 2.86 × 10-7 and 4.4 × 10-9 M, respectively. For S2, the limit of detection for Ga3+ and Pd2+ was 4.15 × 10-8 and 3.0 × 10-9 M, respectively. Furthermore, the complexation ratios of both S1 and S2 with Ga3+ and Pd2+ were determined to be 1:2 through Job's plots, ESI-MS analysis, and theoretical calculations. Two molecular logic gates were constructed, leveraging the response behaviors of S1 and S2. Moreover, the potential utility of S1 and S2 for monitoring Ga3+ and Pd2+ in domestic water was verified.

A novel thienothiophene-based "dual-responsive" probe for rapid, selective and sensitive detection of hypochlorite

BACKGROUND

Hypochlorite/hypochlorous acid (ClO-/HOCl) is a biologically crucial reactive oxygen species (ROS), produced in living organisms and has a critical role as an antimicrobial agent in the natural defense system. However, when ClO- is produced excessively, it can lead to the oxidative damage of biomolecules, resulting in organ damage and various diseases. Therefore, it is imperative to have a straightforward, quick and reliable method for over watching the minimum amount of ClO- in different environments.

RESULTS

Herein, a new probe TTM, containing thienothiophene and malononitrile units, was developed for exceptionally selective and sensitive hypochlorite (ClO-) detection. TTM demonstrated a rapid "turn-on" fluorescence response (<30 s), naked-eye detection (colorimetric), voltammetric read-out with anodic scan, low detection limit (LOD = 0.58 μM and 1.43 μM for optical and electrochemical methods, respectively) and applicability in detecting ClO- in real water samples and living cells.

SIGNIFICANCE AND NOVELTY

This study represents one of the rare examples of a small thienothiophene-based molecule for both optical and electrochemical detections of ClO- in an aqueous medium.

Fine-tuning bromide AIE probes for Hg2+ detection in mitochondria with wash-free staining

Mercury ions (Hg2+) primarily target mitochondria in the cells. Therefore, the development of novel probes that specifically target mitochondria in the presence of Hg2+ is of immense importance. Most previously reported probes that utilize the softness of S, Te, O, and/or N atoms for Hg2+ binding often face problems such as fluorescence quenching and off-target signals. In this study, bromide-hydrocarbon pyridinium salts were designed to target the mitochondria and chelate Hg2+ via Hg-Br coordination bonds. As a prototype, four aggregation-induced emission (AIE) fluorogens, namely TPP-Br, TPP-Cl, R1, and R2, with a similar D-π-A structure but slight differences in their halogen substituents, were designed. Among them, only TPP-Br achieved the highly selective and sensitive detection of Hg2+ by triggering its AIE properties, resulting in remarkable emission enhancement (80-fold), colorimetry, and the Tyndall effect. TPP-Br exhibited high selectivity and sensitivity to Hg2+ with a detection limit of 0.35 μM, rapid response time (<10 s), and large Stokes shift of 185 nm. Their interaction modes were studied using a combination of 1H nuclear magnetic resonance spectroscopy, scanning electron microscopy, fluorescent lifetime decay, and theoretical calculations. TPP-Br exhibited a low emission background in cells, whereas in the presence of Hg2+, mitochondria were lit up with wash-free staining. This study provides a powerful tool for accurately diagnosing mercury poisoning-related diseases in mitochondria.

Synthesis of Di(thiophen-2-yl) Substituted Pyrene-Pyridine Conjugated Scaffold and DFT Insights: A Selective and Sensitive Colorimetric, and Ratiometric Fluorescent Sensor for Fe(III) Ions

In this context, we used the multicomponent Chichibabin pyridine synthesis reaction to synthesize a novel di(thiophen-2-yl) substituted and pyrene-pyridine fluorescent molecular hybrid. The computational (DFT and TD-DFT) and experimental investigations were performed to understand the photophysical properties of the synthesized new structural scaffold. The synthesized ligand displays highly selective fluorescent sensing properties towards Fe3+ ions when compared to other competitive metal ions (Al3+, Ba2+, Ca2+, Cd2+, Co2+, Cr3+, Cu2+, Fe2+, Hg2+, Na+, Ni2+, Pb2+, Sr2+, Sn2+ and Zn2+). The photophysical properties studies reveal that the synthesized hybrid molecule has a binding constant of 2.30 × 103 M-1 with limit of detection (LOD) of 4.56 × 10-5 M (absorbance mode) and 5.84 × 10-5 M (emission mode) for Fe3+ ions. We believe that the synthesized pyrene-conjugated hybrid ligand can serve as a potential fluorescent chemosensor for the selective and specific detection of Fe3+ ions.

Lighting Up Fluorescence: Precise Recognition of Halogenated Solvents Through Effective Fluorescence Detection Using Chalcone Derivatives as a D-A-D-A-type Fluorescent Chemosensor

In this paper, we report a D-A-D-A-type fluorescence sensor, FX, composed of triphenylamine and pyrazine units as electron donors, pyridine units, and α-β unsaturated carbon-based structures as electron acceptors. FX exhibits typical ICT characteristics. As a dual-emission material, FX undergoes acid-base-induced color changes and displays mechanofluorochromic properties in the solid state. In solution, FX, as an AIE material, shows significant fluorescence enhancement behavior in most halogenated solvents. Notably, it achieves a high quantum yield of 0.672 in a chloroform solution. We utilized this phenomenon to quantitatively detect chloroform through fluorescence titration analysis, with a detection limit of 0.061%. Additionally, we developed a test paper to verify the practical applicability of the sensor for detecting halogenated solvents. The fluorescence enhancement behavior was confirmed through DFT calculations. The results indicate that FX is not only a multifunctional dual-state emission material but also provides valuable references for the fluorescence detection of halogenated solvents.

A turn-on fluorescent probe for selective detection of H2S in environmental samples and bio-imaging in human breast cancer cells

A triphenylamine-benzothaizole-based turn-on fluorescent probe TPB-NO2 was designed and synthesized for tracking H2S in both environmental and biological samples depending upon the sensing strategy of thiolysis of 2,4-dinitrophenyl (DNP) ether. Due to PET (photoinduced electron transfer), occurring from donor triphenylamine moiety to acceptor DNP moiety, the probe TPB-NO2 itself is very weakly fluorescent and colorless in DMSO/H2O solution (1 : 1, v/v; 10 mM HEPES buffer, pH 7.4). But the addition of H2S leads to thiolysis of 2,4-dinitrophenyl ether to block the initial PET process and hence it exhibits naked eye detectable turn-on response with bright cyan fluorescence and intense brown color. Not only that, the probe exhibits excellent selectivity over other bio-thiols like Cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), fast response time (<2 min), and high sensitivity with a detection limit of 9.81 nM. Moreover, to explore the practical applicability of our probe we employed it to monitor H2S successfully in environmental water samples, solid-state TLC strip study, Quantitative determination of H2S in eggs, and in the bioimaging of human breast cancer cells (MDA-MB 231).

Design and Synthesis of Benzoheterodiazole-based Fluorescent Compounds for Emitting Applications

Benzoheterodiazole-based fluorophores with aggregation-induced emission (AIE) properties are synthesized and their photophysical properties in different states (solution, film, and powder) are investigated. These compounds present excellent thermal stability, and the decomposition temperature is above 300 °C. Among these compounds, the fluorophores with triphenylamine (TPA) group present better fluorescent emissions in solutions as well as in aggregated states, and the highest solution fluorescent efficiency is up to 75.2% in solution. Meanwhile, the fluorescent compounds terminated with triphenylethene (TPE) exhibit the classical AIE properties. Furthermore, these compounds might be used as emissive layers for the fabrication of red, orange and green organic light emitting diodes.

Spiropyran-Merocyanine Based Photochromic Fluorescent Probes: Design, Synthesis, and Applications

Due to ever-increasing insights into their fundamental properties and photochromic behaviors, spiropyran derivatives are still a target of interest for researchers. The interswitching ability of this photochrome between the spiropyran (SP) and merocyanine (MC) isoforms under external stimuli (light, cations, anions, pH etc.) with different spectral properties as well as the protonation-deprotonation of its MC form allows researchers to use it suitably in sensing purposes by developing different colorimetric and fluorometric probes. Selective and sensitive recognition can be achieved by little modification of its SP moiety and functional groups. In this review, we emphasize the recent advancements (from 2019 to 2022) of spiropyran-merocyanine based fluorogenic and chromogenic probes for selective detection of various metal ions, anions, neutral analytes, and pH. We precisely explain their design strategies, sensing mechanisms, and biological and environmental applications. This review may accelerate the improvements in designing more advanced probes with innovative applications in the near future.

Recent advances in tin ion detection using fluorometric and colorimetric chemosensors

The innovation of chemosensors for tin ions (Sn4+/Sn2+) has evolved as a key research topic in recent decades, garnering a lot of attention due to their environmental, industrial and biological importance.