Single atoms (Pt, Ir and Rh) anchored on activated NiCo LDH for alkaline hydrogen evolution reaction

Atomic Ru-Pt dual sites boost the mass activity and cycle life of alkaline hydrogen evolution

The development of highly efficient and ultrastable electrocatalysts for hydrogen generation from water/real seawater faces huge challenges. Herein, porous carbon-supported amorphous RuPt nanoclusters (Ru5.67Pt/PC) achieve mass activities of 42.28/10.93 A mgPt-1 and ultralong cycling stability in alkaline water/seawater because of the unique cluster structure and atomic Ru-Pt dual sites.

Next-Generation Green Hydrogen: Progress and Perspective from Electricity, Catalyst to Electrolyte in Electrocatalytic Water Splitting

Green hydrogen from electrolysis of water has attracted widespread attention as a renewable power source. Among several hydrogen production methods, it has become the most promising technology. However, there is no large-scale renewable hydrogen production system currently that can compete with conventional fossil fuel hydrogen production. Renewable energy electrocatalytic water splitting is an ideal production technology with environmental cleanliness protection and good hydrogen purity, which meet the requirements of future development. This review summarizes and introduces the current status of hydrogen production by water splitting from three aspects: electricity, catalyst and electrolyte. In particular, the present situation and the latest progress of the key sources of power, catalytic materials and electrolyzers for electrocatalytic water splitting are introduced. Finally, the problems of hydrogen generation from electrolytic water splitting and directions of next-generation green hydrogen in the future are discussed and outlooked. It is expected that this review will have an important impact on the field of hydrogen production from water.

Realizing the Tailored Catalytic Performances on Atomic Pt-Promoted Transition Metal Moieties Implanted Layered Double Hydroxides for Water Electrolysis

High-performance production of green hydrogen gas is necessary to develop renewable energy generation technology and to safeguard the living environment. This study reports a controllable engineering approach to tailor the structure of nickel-layered double hydroxides via doped and absorbed platinum single atoms (PtSA) promoted by low electronegative transition metal (Mn, Fe) moieties (PtSA-Mn,Fe-Ni LDHs). We explore that the electron donation from neighboring transition metal moieties results in the well-adjusted d-band center with the low valence states of PtSA(doped) and PtSA(ads.), thus optimizing adsorption energy to effectively accelerate the H2 release. Meanwhile, a tailored local chemical environment on transition metal centers with unique charge redistribution and high valence states functions as the main center for H2O catalytic dissociation into oxygen. Therefore, the PtSA-Mn,Fe-Ni LDH material possesses a small overpotential of 42 and 288 mV to reach 10 mA·cm-2 for hydrogen and oxygen evolution, respectively, superior to most reported LDH-based catalysts. Additionally, the mass activity of PtSA-Mn,Fe-Ni LDHs proves to be 15.45 times higher than that of commercial Pt-C. The anion exchange membrane electrolyzer stack of PtSA-Mn,Fe-Ni LDHs(+,-) delivers a cell voltage of 1.79 V at 0.5 A·cm-2 and excellent durability over 600 h. This study presents a promising electrocatalyst for a practical water splitting process.

Doping Ru on FeNi LDH/FeII/III-MOF heterogeneous core-shell structure for efficient oxygen evolution

Noble metal-based catalysts such as RuO2 and IrO2 are widely used in the catalysis of the OER. However, because of their high price and poor stability, it is urgent to develop transition metal-based electrocatalysts with low precious metal doping as an alternative. Layered double hydroxides (LDHs) grown on 3D metal-organic frameworks (MOFs) are ideal for doping precious metals owing to abundant defects at the heterointerface, large surface area, and intrinsic oxygen evolution activity. In this study, a novel FeNi LDH/MOF heterostructure was prepared via a two-step solvothermal method using Fe-soc-MOFs as the substrate. Subsequently, Ru was introduced through a hydrothermal process. The as-synthesized Ru@FeNi LDH/MOF has an overpotential of only 242 mV at a current density of 10 mA cm-2 and can be used in continuous electrolysis for 48 h. Its unique nanocubic core-shell structure and flower-like LDHs on its surface provide a large number of active sites, which become the key to ensuring high activity and stability. With the doping of Ru, the electronic structure was adjusted and electron transfer was accelerated, further improving electrochemical activity. This study provides a new idea for developing transition metal-based catalysts with low noble metal loading.

Low-loaded Ru on hollow SnO2 for enhanced electrocatalytic hydrogen evolution

In response to the challenges of intermediate poisoning and the high cost of noble metal catalysts in the hydrogen evolution reaction (HER), we develop a Ru-doped SnO2 catalyst. This Ru-SnO2 catalyst has the characteristics of low Ru loading and a hollow structure, which endow it with good electrocatalytic activity and stability for the HER.

Construction active sites in nickel sulfide by dual-doping vanadium/cobalt for highly effective oxygen evolution reaction

Rational design and exploration of oxygen evolution reaction (OER) electrocatalysts with exceptional performance are crucial for the advancement of the hydrogen energy economy. In this study, vanadium/cobalt (V/Co) dual-doped nickel sulfide (Ni3S2) nanowires were synthesized on a nickel foam (NF) substrate to overcome the sluggish kinetics typically associated with OER. The resulting catalyst exhibited outstanding electrocatalytic activity towards OER in a 1.0 M KOH electrolyte, with a minimal overpotential of 155 and 263 mV, the current densities of 10 and 100 mA cm-2 can be achieved effortlessly. Importantly, this catalyst demonstrated remarkable stability over extended periods, maintaining its performance for 25 h under constant current density, 55 h under continuously varying current density, and even after undergoing 2000 cycles of cyclic voltammetry (CV), which had surpassed those of most non-noble metal electrocatalysts. The X-ray photoelectron spectroscopy and density functional theory analyses confirmed that the co-doping of Co and V redistributed the electron of Ni, leading to improvements in the d-band center, structural characteristics, and free energy landscapes of adsorbed intermediates. This work presents a novel strategy, based on the connection between electronic structure and catalytic properties, in the design of double-doped catalysts for efficient OER.

Enhancing Electrocatalytic Water Oxidation of NiFe-LDH Nanosheets via Bismuth-Induced Electronic Structure Engineering

The design and synthesis of high-efficiency electrocatalysts are of great practical significance in electrocatalytic water splitting, specifically in accelerating the slow oxygen evolution reaction (OER). Herein, a self-supported bismuth-doped NiFe layered double hydroxide (LDH) nanosheet array for water splitting was successfully constructed on nickel foam by a one-step hydrothermal strategy. Benefiting from the abundant active sites of two-dimensional nanosheets and electronic effect of Bi-doped NiFe LDH, the optimal Bi0.2NiFe LDH electrocatalyst exhibits excellent OER performance in basic media. It only requires an overpotential of 255 mV to drive 50 mA cm-2 and a low Tafel slope of 57.49 mV dec-1. The calculation of density functional theory (DFT) further shows that the incorporation of Bi into NiFe LDH could obviously overcome the step of H2O adsorption during OER progress. This work provides a simple and effective strategy for improving the electrocatalytic performance of NiFe LDHs, which is of great practical significance.

Multicomponent Metal Oxide- and Metal Hydroxide-Based Electrocatalysts for Alkaline Water Splitting

Developing cost-effective, highly catalytic active, and stable electrocatalysts in alkaline electrolytes is important for the development of highly efficient anion-exchange membrane water electrolysis (AEMWE). To this end, metal oxides/hydroxides have attracted wide research interest for efficient electrocatalysts in water splitting owing to their abundance and tunable electronic properties. It is very challenging to achieve an efficient overall catalytic performance based on single metal oxide/hydroxide-based electrocatalysts due to low charge mobilities and limited stability. This review is mainly focused on the advanced strategies to synthesize the multicomponent metal oxide/hydroxide-based materials that include nanostructure engineering, heterointerface engineering, single-atom catalysts, and chemical modification. The state of the art of metal oxide/hydroxide-based heterostructures with various architectures is extensively discussed. Finally, this review provides the fundamental challenges and perspectives regarding the potential future direction of multicomponent metal oxide/hydroxide-based electrocatalysts.

Palladium single-atom catalysts synthesized by a gas-assisted redispersion strategy for efficient benzaldehyde hydrogenation

A simple and efficient strategy was developed for the synthesis of Pd single-atom catalysts (Pd_SA/G) by nitric acid vapor-assisted redispersion. The as-prepared Pd_SA/G displayed robust catalytic performance in the selective hydrogenation reaction of benzaldehyde. This work paves a new way for the design of supported Pd single-atom catalysts.

Recent Advances of Modified Ni (Co, Fe)-Based LDH 2D Materials for Water Splitting

Water splitting technology is an efficient approach to produce hydrogen (H₂) as an energy carrier, which can address the problems of environmental deterioration and energy shortage well, as well as establishment of a clean and sustainable hydrogen economy powered by renewable energy sources due to the green reaction of H₂ with O₂. The efficiency of H₂ production by water splitting technology is intimately related with the reactions on the electrode. Nowadays, the efficient electrocatalysts in water splitting reactions are the precious metal-based materials, i.e., Pt/C, RuO₂, and IrO₂. Ni (Co, Fe)-based layered double hydroxides (LDH) two-dimensional (2D) materials are the typical non-precious metal-based materials in water splitting with their advantages including low cost, excellent electrocatalytic performance, and simple preparation methods. They exhibit great potential for the substitution of precious metal-based materials. This review summarizes the recent progress of Ni (Co, Fe)-based LDH 2D materials for water splitting, and mainly focuses on discussing and analyzing the different strategies for modifying LDH materials towards high electrocatalytic performance. We also discuss recent achievements, including their electronic structure, electrocatalytic performance, catalytic center, preparation process, and catalytic mechanism. Furthermore, the characterization progress in revealing the electronic structure and catalytic mechanism of LDH is highlighted in this review. Finally, we put forward some future perspectives relating to design and explore advanced LDH catalysts in water splitting.