Metal-organic frameworks in photocatalytic Z-scheme heterojunctions: an emerging technology

Novel portable photoelectrochemical sensor based on CdS/Au/TiO2 nanotube arrays for sensitive, non-invasive, and instantaneous uric acid detection in saliva

Uric acid (UA) monitoring is the most effective method for diagnosis and treatment of gout, hyperuricemia, hypertension, and other diseases. However, challenges remain regarding detection efficiency and rapid on-site detection. Here, we first synthesized a CdS/Au/TiO2-NTAs Z-scheme heterojunction material using a titanium dioxide nanotube array (TiO2-NTAs) as the substrate and modified with gold nanoparticles (Au) and cadmium sulfide particles (CdS). This material achieves bandgap alignment to generate a large number of electron-hole pairs under illumination. Then, using CdS/Au/TiO2-NTAs as the working electrode and molecularly imprinted polymers (MIP) as the recognition unit, we constructed a portable photoelectrochemical (PEC) sensor for non-invasive instant detection of UA concentration in human saliva, which has unique advantages in the field of high-sensitivity PEC instant detection. The portable MIP-PEC sensor achieves a linear range of 0.01-50 μM and a detection limit as low as 5.07 nM (S/N = 3). At the same time, the portable MIP-PEC sensor exhibits excellent sensitivity, specificity as well as stability, and shows no statistically significant difference compared to traditional high-performance liquid chromatography (HPLC) in practical sample detection. Compared to traditional PEC modes, this work demonstrates a novel and universal method for high-sensitivity instant detection in the field of PEC.

Highly efficient photosynthesis of hydrogen peroxide by a stable Zr(IV)-based MOF with a diamino-functionalized ligand

Metal-organic frameworks (MOFs) have emerged as a promising class of materials for solar-driven hydrogen peroxide (H2O2) generation due to their porosity, large surface area and designable molecular building blocks; however, producing H2O2 from oxygen and water without sacrificial agents remains a major challenge. Herein, we have constructed two UiO-67-type MOFs, UiO-67-NH2 and UiO-67-(NH2)2, by a solvothermal method using 2-amino-4,4'-biphenyldicarboxylic acid and 2,2'-diamino-4,4'-biphenyldicarboxylic acid as ligands, respectively. A variety of photochemical measurements have shown that the introduction of diamino groups into UiO-67-(NH2)2 not only enhances its absorption ability for visible light, but also facilitates the separation of photogenerated electron/hole pairs. Consequently, compared to monoamino-functionalized UiO-67-NH2, UiO-67-(NH2)2 exhibits a 5.5 times higher H2O2 production rate in pure water for 1 h. A two-step one-electron oxygen reduction reaction pathway for photocatalytic H2O2 production was suggested based on a series of control experiments and active species trapping tests by electron paramagnetic resonance spectra. This work provides new insights into the regulation of functionalized MOF ligands at the molecular level and a catalytic mechanism towards MOF-based photocatalysts for H2O2 production with high activity.

Metal-organic framework heterojunctions for photocatalysis

Heterojunctions combining two photocatalysts of staggered conduction and valence band energy levels can increase the photocatalytic efficiency compared to their individual components. This activity enhancement is due to the minimization of undesirable charge recombination by the occurrence of carrier migration through the heterojunction interface with separated electrons and holes on the reducing and oxidizing junction component, respectively. Metal-organic frameworks (MOFs) are currently among the most researched photocatalysts due to their tunable light absorption, facile charge separation, large surface area and porosity. The present review summarizes the current state-of-the-art in MOF-based heterojunctions, providing critical comments on the construction of these heterostructures. Besides including examples showing the better performance of MOF heterojunctions for three important photocatalytic processes, such as hydrogen evolution reaction, CO2 photoreduction and dye decolorization, the focus of this review is on describing synthetic procedures to form heterojunctions with MOFs and on discussing the experimental techniques that provide evidence for the operation of charge migration between the MOF and the other component. Special attention has been paid to the design of rational MOF heterojunctions with small particle size and controlled morphology for an appropriate interfacial contact. The final section summarizes the achievements of the field and provides our views on future developments.

Engineering a Z-Scheme Heterostructure on ZnIn2S4@NH2-MIL-125 Composites for Boosting the Photocatalytic Performance

Constructing a Z-scheme heterostructure on a metal-organic framework (MOF) composite with an explicit charge transfer mechanism at the interface is considered to be an effective strategy for improving the photocatalytic performance of MOFs. Herein, an internal electric field (IEF)-induced Z-scheme heterostructure on the ZnIn2S4@NH2-MIL-125 composite is designed and fabricated by a facile electrostatic self-assembly process. Systematic investigations reveal that close interfacial contact and difference in work function between NH2-MIL-125 and ZnIn2S4 enable the formation of the IEF, which drives the Z-scheme charge transfer as revealed by the in situ irradiated X-ray photoelectron spectroscopy (ISI-XPS), photoirradiated Kelvin probe force microscope (KPFM) measurement, electron paramagnetic resonance (EPR) radical trapping experiment, as well as density functional theory (DFT) calculation; meanwhile, directions of the interfacial IEFs are determined. Benefiting from the unique merit of IEF-induced Z-scheme charge transfer, the optimized ZnIn2S4@NH2-MIL-125 composite exhibits significantly enhanced photocatalytic activity for the photoreduction of 4-nitroaniline (4-NA) to p-phenylenediamine (PPD) under visible light irradiation. This work not only provides in-depth insights for charge transfer in the IEF-induced Z scheme heterostructure but also affords useful inspirations on designing the Z-scheme MOF composite to boost the photocatalytic performance.

Recent Advances in Metal-Organic Framework (MOF)-Based Photocatalysts: Design Strategies and Applications in Heavy Metal Control

The heavy metal contamination of water systems has become a major environmental concern worldwide. Photocatalysis using metal-organic frameworks (MOFs) has emerged as a promising approach for heavy metal remediation, owing to the ability of MOFs to fully degrade contaminants through redox reactions that are driven by photogenerated charge carriers. This review provides a comprehensive analysis of recent developments in MOF-based photocatalysts for removing and decontaminating heavy metals from water. The tunable nature of MOFs allows the rational design of composition and features to enhance light harvesting, charge separation, pollutant absorptivity, and photocatalytic activities. Key strategies employed include metal coordination tuning, organic ligand functionalization, heteroatom doping, plasmonic nanoparticle incorporation, defect engineering, and morphology control. The mechanisms involved in the interactions between MOF photocatalysts and heavy metal contaminants are discussed, including light absorption, charge carrier separation, metal ion adsorption, and photocatalytic redox reactions. The review highlights diverse applications of MOF photocatalysts in treating heavy metals such as lead, mercury, chromium, cadmium, silver, arsenic, nickel, etc. in water remediation. Kinetic modeling provides vital insights into the complex interplay between coupled processes such as adsorption and photocatalytic degradation that influence treatment efficiency. Life cycle assessment (LCA) is also crucial for evaluating the sustainability of MOF-based technologies. By elucidating the latest advances, current challenges, and future opportunities, this review provides insights into the potential of MOF-based photocatalysts as a sustainable technology for addressing the critical issue of heavy metal pollution in water systems. Ongoing efforts are needed to address the issues of stability, recyclability, scalable synthesis, and practical reactor engineering.