Recent developments in the investigation of driving forces for transforming coinage metal nanoclusters

Towards bridging thermo/electrocatalytic CO oxidation: from nanoparticles to single atoms

Proton exchange membrane fuel cells (PEMFCs), as a feasible alternative to replace the traditional fossil fuel-based energy converter, contribute significantly to the global sustainability agenda. At the PEMFC anode, given the high exchange current density, Pt/C is deemed the catalyst-of-choice to ensure that the hydrogen oxidation reaction (HOR) occurs at a sufficiently fast pace. The high performance of Pt/C, however, can only be achieved under the premise that high purity hydrogen is used. For instance, in the presence of trace level carbon monoxide, a typical contaminant during H2 production, Pt is severely deactivated by CO surface blockage. Addressing the poisoning issue necessitates for either developing anti-poisoning electrocatalysts or using pre-purified H2 obtained via a thermo-catalysis route. In other words, the CO poisoning issue can be addressed by either thermal-catalysis from the H2 supply side or electrocatalysis at the user side, respectively. In spite of the distinction between thermo-catalysis and electro-catalysis, there are high similarities between the two routes. Essentially, a reduction in the kinetic barrier for the combination of CO to oxygen containing intermediates is required in both techniques. Therefore, bridging electrocatalysis and thermocatalysis might offer new insight into the development of cutting edge catalysts to solve the poisoning issue, which, however, stands as an underexplored frontier in catalysis science. This review provides a critical appraisal of the recent advancements in preferential CO oxidation (CO-PROX) thermocatalysts and anti-poisoning HOR electrocatalysts, aiming to bridge the gap in cognition between the two routes. First, we discuss the differences in thermal/electrocatalysis, CO oxidation mechanisms, and anti-CO poisoning strategies. Second, we comprehensively summarize the progress of supported and unsupported CO-tolerant catalysts based on the timeline of development (nanoparticles to clusters to single atoms), focusing on metal-support interactions and interface reactivity. Third, we elucidate the stability issue and theoretical understanding of CO-tolerant electrocatalysts, which are critical factors for the rational design of high-performance catalysts. Finally, we underscore the imminent challenges in bridging thermal/electrocatalytic CO oxidation, with theory, materials, and the mechanism as the three main weapons to gain a more in-depth understanding. We anticipate that this review will contribute to the cognition of both thermocatalysis and electrocatalysis.

Hydrogen production catalysed by atomically precise metal clusters

Atomically precise metal clusters that possess the exact atom number, definitive composition, and tunable geometric and electronic structures have emerged as ideal model catalysts for many important chemical processes. Recently, metal clusters have been widely used as excellent catalysts for hydrogen production to explore the relationship between the structure and catalytic properties at the atomic level. In this review, we systematically summarize the significant developments concerning metal clusters as electrocatalysts and photocatalysts for hydrogen generation. This review also puts forward the challenges and perspectives of atomically precise metal clusters in electrocatalysis and photocatalysis in the hope of providing a valuable reference for the rational design of high-performance catalysts for hydrogen production.

Extensive Polymerization of Atomically Precise Alloy Metal Clusters During Solid-State Reactions

Exploring the reactions between atomically precise metal clusters and the consequences of such reactions has been an exciting field of research during the past decade. Initial studies in the area were on reactions between clusters in the solution phase, which proceed through the formation of dimers of reacting clusters. In the present work, we examine the interaction between two atomically precise clusters, [Au25(PET)18]- and [Ag25(DMBT)18]-, in the solid state, where PET and DMBT are 2-phenylethanethiol and 2,4-dimethylbenzenethiol, respectively. The experiments were performed using different ratios of these two clusters, and it was inferred that the kinetics of the reactions were faster compared with reactions in the solution. The metal exchange between these two clusters, due to their interactions in the solid state, leads to the formation of dimers, trimers, tetramers, and polymers of atomically precise alloy metal clusters. We observed polymer entities up to hexamers, which were observed for the first time. Control experiments revealed that metal exchange is a key factor leading to polymerization. Our work points to a new approach for synthesizing polymers of atomically precise alloy metal clusters.

Assembly of anionic silver nanoclusters with controlled packing structures through site-specific ionic bridges

The assembly of metal nanoclusters (NCs) into crystalline lattice structures is of interest in the development of NC-based functional materials. Here we demonstrate that the assembled structures of tri-anionic tetrahedral symmetric [Ag29(BDT)12]3- (Ag29 NC, BDT: 1,3-benzenedithiol) NCs are controlled into a polyethylene-like zigzag chain and a "poly-ring-fused-cyclohexane"-like honeycomb arrangement through ionic interactions with alkali metal cations such as K+ and Cs+. The site-specific binding of alkali metal ions on the tetrahedrally arranged binding sites of Ag29 NCs successfully connects the adjacent NCs into various packing modes. The number and type of bridges between NCs determine the Ag29 NC packing structures, which are affected by the solvent species, enabling the transformation of packing modes in the single-crystalline state. The photoluminescence (PL) properties of the crystals responded to the packing modes of the NCs in terms of anisotropy and bridge linkage style inducing a varied degree of relaxation of the excited state depending on the relocation mobility of alkali metal ions in the crystals.

BINOL-Based Chiral Macrocycles and Cages

Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1'-binaphthyl-2,2'-diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.

Enantioselective Synthesis of Homochiral Hierarchical Nd8Fe3-Oxo Cluster from Racemic Nd9Fe2-Oxo Cluster

Enantioselective synthesis of homochiral rare earth clusters is still a great challenge. In this work, we developed an efficient "cluster to cluster" approach, that is, a pair of enantiomerical R/S-{Nd8Fe3}-oxo clusters were successfully obtained from the presynthesized racemic {Nd9Fe2}-oxo cluster. R/S-hydrobenzoin ligands trigger the transformation of the pristine clusters by an SN2-like mechanism. Compared to the pristine cluster with an achiral core, the new cluster exhibits hierarchical chirality, from ligand chirality to interface chirality, then to helix chirality, and finally to supramolecular double helix chirality. The spectral experiments monitored the transformation and confirmed distinctly structure-related optical activity. The enantiomeric pure cluster also exhibits a potential asymmetric catalytic activity.

Revisiting the structure of [PdAu9(PPh3)8(CN)]2+ produced by atmospheric pressure plasma irradiation of [PdAu8(PPh3)8]2+ in methanol

Some of the authors of the present research group have previously reported mass spectrometric detection of [PdAu9(PPh3)8(CN)]2+ (PdAu9CN) by atmospheric pressure plasma (APP) irradiation of [MAu8(PPh3)8]2+ (PdAu8) in methanol and proposed based on density functional theory (DFT) calculations that PdAu9CN is constructed by inserting a CNAu or NCAu unit into the Au-PPh3 bond of PdAu8 [Emori et al., J. Chem. Phys. 155, 124312 (2021)]. In this follow-up study, we revisited the structure of PdAu9CN by high-resolution ion mobility spectrometry on an isolated sample of PdAu9CN with the help of dispersion-corrected DFT calculation. In contradiction to the previous proposal, we conclude that isomers in which an AuCN unit is directly bonded to the central Pd atom of PdAu8 are better candidates. This assignment was supported by Fourier transform infrared and ultraviolet-visible spectroscopies of isolated PdAu9CN. The simultaneous formation of [Au(PPh3)2]+ and PdAu9CN suggests that the AuCN species are formed by APP irradiation at the expense of a portion of PdAu8. These results indicate that APP may offer a unique method for transforming metal clusters into novel ones by generating in situ active species that were not originally added to the solution.

Rethinking the stability of metal nanoclusters: the individual versus the collective

Research on the stability of metal nanoclusters and their molecular/supramolecular chemistry has proceeded significantly independently thus far. We herein have demonstrated that the stability of a nanocluster-based system should be assessed from both the cluster individual aspect (i.e., the energy of the molecular conformer) and the cluster collective aspect (i.e., the energy of the supramolecular lattice). A pair of Au2Cu6 cluster polymorphs, including Au2Cu6-triclinic and Au2Cu6-trigonal, was developed here to reveal the energy and stability contributions of both cluster conformers and crystalline lattices to their total systems. This work hopefully promotes a comprehensive understanding of the stability of cluster-based nano-systems which is beneficial for their downstream applications.

Synthesis of N2-Type Superatomic Molecules

Exploration of multiple bonds between superatoms remains an uncharted territory. In this study, we present the synthesis and characterization of N2-type superatomic molecules featuring triple bonds between two superatoms. The successful synthesis of M2Au17 (M = Pd, Pt) nanoclusters hinged upon the photoinduced fusion of MAu12 superatoms, achieved through sequential electron transfer and detachment of [AuPR3]+ species. Solid-state structures were confirmed via X-ray crystallography, while their electronic structures were elucidated through density functional theory (DFT) calculations. Analysis of electronic absorption properties, coupled with time-dependent DFT calculations, unveiled a symmetry-dependent electron transition nature between superatomic molecular orbitals, akin to that observed in conventional molecules.

Chemical Flexibility of Atomically Precise Metal Clusters

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Temperature-Controlled Selective Formation of Silver Nanoclusters and Their Transformation to the Same Product

Herein, two atomically precise silver nanoclusters, Ag54 and Ag33, directed by inner anion templates (CrO4 2- and/or Cl-), are initially isolated as a mixed phase from identical reactants across a wide temperature range (20-80 °C). Interestingly, fine-tuning the reaction temperature can realize pure phase synthesis of the two nanoclusters; that is, a metastable Ag54 is kinetically formed at a low temperature (20 °C), whereas such a system is steered towards a thermodynamically stable Ag33 at a relatively high temperature (80 °C). Electrospray ionization mass spectrometry illustrates that the stability of Ag33 is superior to that of Ag54, which is further supported by density functional theory calculations. Importantly, the difference in structural stability can influence the pathway of 1,4-bis(pyrid-4-yl)benzene induced transformation reaction starting from Ag54 and Ag33. The former undergoes a dramatic breakage-reorganization process to form an Ag31 dimer (Ag31), while the same product can be also achieved from the latter following a noninvasive ligand exchange process. Both the Ag54 and Ag33 have the potential for further remote laser ignition applications. This work not only demonstrates how temperature controls the isolation of a specific phase, but also sheds light on the structural transformation pathway of nanoclusters with different stability.

A non-FRET DNA reporter that changes fluorescence colour upon nuclease digestion

Fluorescence resonance energy transfer (FRET) reporters are commonly used in the final stages of nucleic acid amplification tests to indicate the presence of nucleic acid targets, where fluorescence is restored by nucleases that cleave the FRET reporters. However, the need for dual labelling and purification during manufacturing contributes to the high cost of FRET reporters. Here we demonstrate a low-cost silver nanocluster reporter that does not rely on FRET as the on/off switching mechanism, but rather on a cluster transformation process that leads to fluorescence color change upon nuclease digestion. Notably, a 90 nm red shift in emission is observed upon reporter cleavage, a result unattainable by a simple donor-quencher FRET reporter. Electrospray ionization-mass spectrometry results suggest that the stoichiometric change of the silver nanoclusters from Ag13 (in the intact DNA host) to Ag10 (in the fragments) is probably responsible for the emission colour change observed after reporter digestion. Our results demonstrate that DNA-templated silver nanocluster probes can be versatile reporters for detecting nuclease activities and provide insights into the interactions between nucleases and metallo-DNA nanomaterials.

Anomalous Structural Transformation of Cu(I) Clusters into Multifunctional CuAg Nanoclusters

We report an anomalous structural transformation of a Cu(I) cluster into two different types of copper-silver (CuAg) alloy nanoclusters. Different from previous reports, we demonstrate that under specifically designed reaction conditions, the Ag-doping could induce a substantial growth of the starting Cu15 and a Ag13Cu20 nanocluster was obtained via the unexpected insertion of an Ag13 kernel inside the Cu(I)-S shell. Ag13Cu20 demonstrates high activity to initiate the photopolymerization of previously hard-to-print inorganic polymers in 3D laser microprinting. Interestingly, a slight modification of the reaction condition leads to the formation of another Ag18-xCuxS (8≤x) nanocluster templated by a central S2- anion, which possesses a unique electronic structure compared to conventional template-free CuAg nanoclusters. Overall, this work unveils the intriguing doping chemistry of Cu clusters, as well as their capability to create different types of alloy nanoclusters with previously unobtainable structures and multifunctionality.

A Versatile Strategy for the Controlled Synthesis of Atomically Precise Palladium Nanoclusters

The study of the structures, applications, and structure-property relationships of atomically precise metal nanoclusters relies heavily on their controlled synthesis. Although great progress has been made in the controlled synthesis of Group 11 (Cu, Ag, Au) metal nanoclusters, the preparation of Pd nanoclusters remains a grand challenge. Herein, a new, simple, and versatile synthetic strategy for the controlled synthesis of Pd nanoclusters is reported with tailorable structures and functions. The synthesis strategy involves the controllable transformations of Pd4(CO)4(CH3COO)4 in air, allowing the discovery of a family of Pd nanoclusters with well-defined structure and high yield. For example, by treating the Pd4(CO)4(CH3COO)4 with 2,2-dipyridine ligands, two clusters of Pd4 and Pd10 whose metal framework describes the growth of vertex-sharing tetrahedra have been selectively isolated. Interestingly, chiral Pd4 nanoclusters can be gained by virtue of customized chiral pyridine-imine ligands, thus representing a pioneering example to shed light on the hierarchical chiral nanostructures of Pd. This synthetic methodology also tolerates a wide variety of ligands and affords phosphine-ligated Pd nanoclusters in a simple way. It is believed that the successful exploration of the synthetic strategy would simulate the research enthusiasm on both the synthesis and application of atomically precise Pd nanoclusters.

An Au5Ag12(SR)9(dppf)4 alloy nanocluster: structural determination and optical property and photothermal conversion investigation

Photothermal conversion has garnered significant attention due to its potential for efficient energy conversion and application in targeted therapies. However, controlling photothermal properties at the atomic level remains a challenge in current materials synthesis. In this study, we report the synthesis and structural determination of a phosphine and mercaptan co-protected Au5Ag12(SR)9(dppf)4 (Au5Ag12) nanocluster with an extremely low quantum yield (∼0%). For comparative purposes, we synthesized three alloy nanoclusters of similar size. Notably, Au5Ag12 demonstrates a remarkably superior photothermal conversion performance, significantly outperforming the other clusters. We investigated this variance from both absorption and emission perspectives. This research not only opens new avenues for the application of clusters with extremely low quantum yields, but also provides experimental evidence for understanding the photothermal conversion properties of cluster materials at the atomic level.

Understanding the decomposition process of the Pt1Ag24(SPhCl2)18 nanocluster at the atomic level

We report the decomposition of the Pt1Ag24(SPhCl2)18 nanocluster into a crown-like Pt1Ag4(SR)8 (SR = 2,4-SPhCl2 and 4-SPhBr) complex. UV-vis spectra and single crystal X-ray diffraction were used to track the structure-conversion process. Based on the total structure, the differences in ligand exchange rates at different sites and the effects on the stability were mapped out. This work can not only help us understand the ligand exchange behavior of the clusters, but also provide experimental support for the design of stable metal clusters.

Photoluminescence Quenching of Hydrophobic Ag29 Nanoclusters Caused by Molecular Decoupling during Aqueous Phase Transfer and EmissionRecovery through Supramolecular Recoupling

Exploiting emissive hydrophobic nanoclusters for hydrophilic applications remains a challenge because of photoluminescence (PL) quenching during phase transfer. In addition, the mechanism underlying PL quenching remains unclear. In this study, the PL-quenching mechanism was examined by analyzing the atomically precise structures and optical properties of a surface-engineered Ag29 nanocluster with an all-around-carboxyl-functionalized surface. Specifically, phase-transfer-triggered PL quenching was justified as molecular decoupling, which directed an unfixed cluster surface and weakened the radiative transition. Furthermore, emission recovery of the quenched nanoclusters was accomplished by using a supramolecular recoupling approach through the glutathione-addition-induced aggregation of cluster molecules, wherein the restriction of intracluster motion and intercluster rotation strengthened the radiative transition of the clusters. The results of this work offer a new perspective on structure-emission correlations for atomically precise nanoclusters and hopefully provide insight into the fabrication of highly emissive cluster-based nanomaterials for downstream hydrophilic applications.

Transcytosis-Based Renal Tubular Reabsorption of Luminescent Gold Nanoparticles for Enhanced Tumor Imaging

Transcytosis-based tubular reabsorption of endogenous proteins is a well-known energy-saving pathway that prevents nutrient loss. However, utilization of this well-known reabsorption pathway for the delivery of exogenous nanodrugs remains a challenge. In this study, using the surface mimic strategy of a specific PEPT1/2-targeted Gly-Sar peptide as a ligand, renal-clearable luminescent gold nanoparticles (P-AuNPs) were developed as protein mimics to investigate the transcytosis-based tubular reabsorption of exogenous substances. By regulating the influential factors (H+ content in tubular lumens and PEPT1/2 transporter counts in tubular cells) of Gly-Sar-mediated transcytosis, the specific and efficient interaction between P-AuNPs and renal tubular cells was demonstrated both in vitro and in vivo. Efficient transcellular transportation significantly guided the reabsorption of P-AuNPs back into the bloodstream, which enhanced the blood concentration and bioavailability of nanoparticles, contributing to high-contrast tumor imaging.

A homologous series of macrocyclic Ni clusters: synthesis, structures, and catalytic properties

Due to their intriguing ring structures and promising applications, nickel-thiolate clusters, such as [Nin(SR)2n] (n = 4-6), have attracted tremendous interest. However, investigation of the synthesis, structures, and properties of macrocyclic Nin clusters (n > 8) has been seriously impeded. In this work, a homologous series of macrocyclic nickel clusters, Nin(4MPT)2n (n = 9-12), was fabricated by using 4-methylphenthiophenol (4MPT) as the ligand. The structures and compositions of the clusters were determined by single-crystal X-ray diffraction (SXRD) in combination with electrospray ionization mass spectrometry (ESI-MS). Experimental results and theoretical calculations show that the electronic structures of the clusters do not change significantly with the increase of Ni atoms. The coordination interactions between Ni and S atoms in [NiS4] subunits are proved to play a crucial rule in the remarkable stability of Ni clusters. Finally, these clusters display excellent catalytic activity towards the reduction of p-nitrophenol, and a linear correlation between catalytic activity and ring size was revealed. The study provides a facile approach to macrocyclic homoleptic nickel clusters, and contributes to an in-depth understanding of the structure-property correlations of nickel clusters at the atomic level.

The structure-activity relationship of copper hydride nanoclusters in hydrogenation and reduction reactions

Copper hydrides are highly active catalysts in hydrogenation reactions and reduction processes. Three Stryker-type copper hydride nanoclusters (NCs), [(TPP)CuH]6, [(TCP)CuH]6 and [(TOP)CuH]6 (TPP = triphenylphosphine, TCP = tricyclohexylphosphine and TOP = tri-n-octylphosphine), were synthesized in this study. Due to variations in the electron-donating properties of the phosphine ligands, the UV-visible absorption spectra of the three NCs exhibited notable distinctions. The influence of the phosphine ligands on the effectiveness of the NCs as hydride sources in hydrogenation processes, as well as on the applicability as homogeneous catalysts for reduction reactions, was systematically studied. Due to the highest electron-donating properties of the TOP ligand, [(TOP)CuH]6 was found to exhibit superior performance in both hydrogenation reactions and catalytic reduction reactions. Moreover, these hydrophobic NCs worked well as heterogeneous catalysts in the reduction of 4-nitrophenol.

Thiacalix[4]arene Etching of an Anisotropic Cu70H22 Intermediate for Accessing Robust Modularly Assembled Copper Nanoclusters

Atom-precise metal nanoclusters (NCs) with large bulk (nuclearity >60) are important species for insight into the embryonic phase of metal nanoparticles and their top-down etching synthesis. Herein, we report a metastable rod-shaped 70-nuclei copper-hydride NC, [Cl@Cu70H22(PhC≡C)29(CF3COO)16]2+ (Cu70), with Cl- as the template, in which the Cl@Cu59 kernel adopts a distinctive metal packing mode along the bipolar direction, and the protective ligand shell exhibits corresponding site differentiation. In terms of metal nuclearity, Cu70 is the largest alkynyl-stabilized Cu-hydride cluster to date. As a typical highly active intermediate, Cu70 could undergo a transformation into a series of robust modularly assembled Cu clusters (B-type Cu8, A-A-type Cu22, A-B-type Cu23, and A-B-A-type Cu38) upon etching by p-tert-butylthiacalix[4]arene (H4TC4A), which could not be achieved by "one-pot" synthetic methods. Notably, the patterns of A and B blocks in the Cu NCs could be effectively modulated by employing appropriate counterions and blockers, and the modular assembly mechanism was illustrated through comprehensive solution chemistry analysis using HR-ESI-MS. Furthermore, catalytic investigations reveal that Cu38 could serve as a highly efficient catalyst for the cycloaddition of propargylic amines with CO2 under mild conditions. This work not only enriched the family of high-nuclear copper-hydride NCs but also provided new insights into the growth mechanism of metal NCs.

X-ray-triggered through-space charge transfer and photochromism in silver nanoclusters

Materials exhibiting X-ray-induced photochromism have consistently piqued the interest of researchers. Exploring the photochromic properties of such materials is valuable for understanding the structural changes and electron transfer processes that occur under high energy radiation, such as X-ray irradiation. Here, a crystalline silver(I) nanocluster synthesized from tert-butylacetylene silver was found to have the ability to exhibit color and photoluminescence changes upon exposure to X-ray radiation. The responsive behavior was observed across a wide temperature range of 100-300 K, with the ability to respond particularly well to soft X-rays (λ > 1 Å) and exhibit light responsiveness to hard X-rays (λ < 1 Å). By combining experimental findings including X-ray diffraction, X-ray photoelectron spectroscopy, electron spin resonance, etc. with theoretical calculations, we have proposed that X-ray irradiation induces electron transfer from chloride (Cl-) located in the center of the silver(I) nanocluster to the surrounding Ag14 in the skeleton. This represents the first documented example in which electron transfer induced by X-ray excitation has been observed, accompanied by a photochromism process, in silver nanoclusters. This study contributes to our understanding of X-ray-induced photochromism and the electron transfer process in silver cluster compounds. It also provides valuable insights and potential design strategies for applications such as photochromism, photoluminescence color change, and photoenergy conversion.

Structure control and evolution of atomically precise gold clusters as heterogeneous precatalysts

Metal clusters have distinct features from single atom and nanoparticle (>1 nm) catalysts, making them effective catalysts for various heterogeneous reactions. Nevertheless, the ambiguity and complexity of the catalyst structure preclude in-depth mechanistic studies. The evolution of metal species during synthesis and reaction processes represents another challenge. One effective solution is to precisely control the structure of the metal cluster, thus offering a well-defined pre-catalyst. The well-defined chemical formula and configurations make atomically precise metal nanoclusters optimal choices. To fabricate an atomically precise metal nanocluster-based heterogeneous catalyst with enhanced performance, careful structural design of both the nanocluster and support material, an effective assembling technique, and a pre-treatment method for these hybrids need to be developed. In this review, we summarize recent advances in in the development of heterogeneous catalysts using atomically precise gold and alloy gold nanoclusters as precursors. We will begin with a brief introduction to the structural properties of atomically precise nanoclusters and structure determination of cluster/support hybrids. We will then introduce heterogeneous catalysts prepared from medium size (tens to hundreds of metal atoms) and low nuclearity nanoclusters. We will illustrate how ligand modification, support-cluster interaction, hybrid fabrication, and heteroatom (Pt, Pd Ag, Cu, Cd, Fe) introduction affect the structural properties and pretreatment/reaction-induced structural evolution of gold nanocluster pre-catalysts. Lastly, we will highlight the synthetic method of NCs@MOF hybrids and their effectiveness in circumventing the adverse cluster structural evolution. These findings are expected to shed light on the structure-activity relationship studies and future catalyst design strategies using atomically precise metal nanocluster pre-catalysts.

Self-assembled copper nanoclusters used to mimic peroxidase for glucose detection

A sensing system for glucose was established based on a self-assembled copper nanoclusters (Cu NCs)-based nano-enzyme and glucose oxidase (GOD). The assembled copper nanosheets (Cu NSs) were prepared in a one-step method using 2,3,4,5,6-pentafluorothiophenol (PFTP) as a reducing agent and protecting ligand. Cu NSs could be used to mimic the enzyme horseradish peroxidase. Cu NSs were endowed with excellent enzymatic catalytic activity in the oxidation of o-phenyldiamine (OPD) in the presence of H2O2. The latter could be generated in the aerobic oxidation of glucose catalyzed by GOD. Therefore, a detection method for glucose was constructed based on a Cu NSs-OPD-GOD catalytic system. This proposed sensing platform showed a standard linear range from 10 μM to 5 mM towards glucose, and the limit of detection was 5.5 μM. Finally, practical application of a sensor based on the Cu NSs nano-enzyme was verified in three sugared beverages as real samples. Our data reveal that the prepared Cu NSs could mimic peroxidase and be applied to a mixed catalytic system with GOD for glucose detection.

Parasitism in Metal Nanoclusters: A Case Study of (AuAg)25·(AuAg)27

Studying the interactions of atomically precise metal nanoclusters in their assembly systems is of great significance in the nanomaterial research field, which has attracted increasing interest in the last few decades. Herein, we report the cocrystallization of two oppositely charged atomically precise metal nanoclusters in one unit cell: [Au1Ag24(SR)18]- ((AuAg)25 for short) and [AuxAg27-x(Dppf)4(SR)9]2+ (x = 10-12; (AuAg)27 for short) with a 1:1 ratio. (AuAg)27 could maintain its structure in the presence of (AuAg)25, whether in the crystalline and the solution state, while the metastable (AuAg)27 component underwent a spontaneous transformation to (AuAg)16(Dppf)2(SR)8 after dissociating the (AuAg)25 component from this cocrystal, demonstrating the "parasitism" relationship of the (AuAg)27 component over (AuAg)25 in this dual-cluster system. This work enriches the family of cluster-based assemblies and elucidates the delicate relationship between nanoparticles of cocrystals.

Enhancing Fenton-like Degradation of Organic Pollutants at Neutral pH by Multivalent Cu NCs/HAp Nanocatalysts

Heterogeneous Fenton-like catalysis is a widely used method for the degradation of organic pollutants. However, it still has some limitations such as low activity in the neutral condition, low conversion rates of metals with different valence states, and potential secondary metal pollution. In this study, a Fenton-like nanocatalyst was first created by generating ultrasmall copper nanoclusters (Cu NCs) on the surface of hydroxyapatite (HAp) through a process of doping followed by modification. This resulted in the formation of a composite nanocatalyst known as Cu NCs/HAp. With the help of hydrogen peroxide (H2O2), Cu NCs/HAp exhibits an outstanding Fenton-like catalytic performance by efficiently degrading organic dyes such as methylene blue under mild neutral conditions. The removal rate can reach over 83% within just 30 min, demonstrating ideal catalytic universality and stability. The improved Fenton-like catalytic performance of Cu NCs/HAp can be ascribed to the synergistic effect of the multivalent Cu species through two simultaneous reaction pathways. During route I, the embedded Cu NCs with a core-shell Cu0/Cu+ structure can undergo sequential oxidation to form Cu2+, which continuously activates H2O2 to generate hydroxyl radicals (•OH) and singlet oxygen (1O2). In route II, Cu2+ produced from route I and initially adsorbed on the surface of HAp can be reduced by H2O2, thus regenerating Cu+ species for route I and achieving a closed-loop reaction. This work has confirmed that Cu NCs loaded on HAp may be an alternative Fenton-like catalyst for degradation of organic pollutants and environmental remediation, opening up new avenues for potential applications of other Cu NCs in future water pollution control.

Multiscale Bioresponses of Metal Nanoclusters

Metal nanoclusters (NCs) are well-recognized novel nano-agents that hold great promise for applications in nanomedicine because of their ultrafine size, low toxicity, and high renal clearance. As foreign substances, however, an in-depth understanding of the bioresponses to metal NCs is necessary but is still far from being realized. Herein, this review is deployed to summarize the biofates of metal NCs at various biological levels, emphasizing their multiscale bioresponses at the molecular, cellular, and organismal levels. In the parts-to-whole schema, the interactions between biomolecules and metal NCs are discussed, presenting typical protein-dictated nano-bio interfaces, hierarchical structures, and in vivo trajectories. Then, the accumulation, internalization, and metabolic evolution of metal NCs in the cellular environment and as-imparted theranostic functionalization are demonstrated. The organismal metabolism and transportation processes of the metal NCs are subsequently distilled. Finally, this review ends with the conclusions and perspectives on the outstanding issues of metal NC-mediated bioresponses in the near future. This review is expected to provide inspiration for tailoring the customization of metal NC-based nano-agents to meet practical requirements in different sectors of nanomedicine.