Extended linear detection range of a Bi0.5Na0.5TiO3 thin film-based self-powered UV photodetector via current and voltage dual indicators

A General Strategy for Ordered Carrier Transport of Quasi-2D and 3D Perovskite Films for Giant Self-Powered Photoresponse and Ultrahigh Stability

Organic-inorganic hybrid perovskite materials have been focusing more attention in the field of self-powered photodetectors due to their superb photoelectric properties. However, a universal growth approach is required and challenging to realize vertically oriented growth and grain boundary fusion of 2D and 3D perovskite grains to promote ordered carrier transport, which determines superior photoresponse and high stability. Herein, a general thermal-pressed (TP) strategy is designed to solve the above issues, achieving uniaxial orientation and single-grain penetration along the film thickness direction. It constructs the efficient channel for ordered carrier transport between two electrodes. Combining of the improved crystal quality and lower trap-state density, the quasi-2D and 3D perovskite-based self-powered photodetector devices (with/without hole transport layer) all exhibit giant and stable photoresponse in a wide spectrum range and specific wavelength laser. For the MAPbI3-based self-powered photodetectors, the largest Rλ value is as high as 0.57 A W-1 at 760 nm, which is larger than most reported results. Meanwhile, under laser illumination (532 nm), the FPEA2MA4Pb5I16-based device exhibits a high responsivity (0.4 A W-1) value, which is one of the best results in 2DRP self-powered photodetectors. In addition, fast response, ultralow detection limit, and markedly improved humidity, optical and heat stabilities are clearly demonstrated for these TP-based devices.

2D Ruddlesden-Popper perovskite sensitized SnP2S6 ultraviolet photodetector enabling high responsivity and fast speed

As the newly developed wide-bandgap semiconductors, two-dimensional layered metal phosphorus chalcogenides (2D LMPCs) exhibit enormous potential applications in ultraviolet (UV) photodetection due to their superior optoelectronic performance. However, 2D LMPC-based UV photodetectors generally suffer from low responsivity and slow response speed, which hinder their practical applications. Here, we present an effective strategy of sensitizing 2D LMPC UV photodetectors with a 2D Ruddlesden-Popper (RP) perovskite to enable high responsivity and fast response speed. As a demonstration, a hybrid heterojunction composed of RP perovskite (PEA)₂PbI₄ and a 2D SnP₂S₆ flake is fabricated by spin-coating method. Benefitting from the strong optical absorption of (PEA)₂PbI₄ and the efficient interfacial charge transfer caused by the favorable type-II energy band alignment, the as-fabricated 2D SnP₂S₆/(PEA)₂PbI₄ hybrid heterojunction photodetectors show high responsivity (67.1 A W^-1), large detectivity (2.8 × 10¹¹ Jones), fast rise/delay time (30/120 μs) and excellent external quantum efficiency (22825%) at 365 nm. Under field-effect modulation, the responsivity of the heterojunction photodetector can reach up to 239.4 A W^-1, which is attributed to the photogating mechanism and reduced Schottky barriers. Owing to the excellent photodetection performance, the heterojunction device further shows superior imaging capability. This work provides an effective strategy for designing high-performance UV photodetectors toward future applications.