Silver based photocatalysts in emerging applications

Photocatalytic degradation of Alizarin Red contaminant using Ag2CrO4@NiFe-LDH composite under visible light irradiation

In this study, Ag2CrO4@NiFe-LDH nanoparticles were synthesized by hydrothermal method for photocatalytic degradation of Alizarin Red (AR) dye. Three composites with different molar percentages were prepared, among which 50%Ag2CrO4@50%NiFe-LDH composite was the best sample with a removal rate of 97.1% in AR degradation. Also, the properties, structure, and characteristics of pure Ag2CrO4 and NiFe-LDH and their composites were determined by XRD, FESEM, FTIR, EDX mapping, and UV-visible analyses. It was found that Ag2CrO4@NiFe-LDH composites with the formation of heterogeneous structure of Z-scheme, in addition to increasing the active sites and increasing the specific surface, decrease the recombination rate of pure Ag2CrO4 and NiFe-LDH. Also, the Box-Behnken design technique, which is one of the most common designs used in response surface methodology, was used to optimize the operating conditions and investigate the effect of 4 independent parameters: catalyst amount, solution concentration, pH, and light intensity. The importance of independent parameters and their interactions were determined by ANOVA. By means of numerical optimization, the optimal values of the selected parameters equal to 1.34 g/L of catalyst, concentration of 16.45 mg/L, pH = 10.74, and light intensity of 15.53 W were obtained as optimal conditions with a desirability coefficient of 1.00 and an absorption value of 89.34%. The closeness of adjusted R2 (0.9838) and predicted R2 (0.9507) values show that this model can be successfully used for prediction.

Hierarchical surface-modification of nano-Cu toward one pot H-transfer-coupling-cyclization-CO2 fixation tandem reactions

Fixation of CO2 into dihydroisobenzofuran derivatives has enormous applications in both production of natural products and antidepressant drugs, and reducing the green-house effect. However, the relatively complicated multi-step processes limit the further expansion of such a valuable CO2 conversion strategy. Herein, we hierarchically modify the surface of Cu nanoparticles (NPs) with Ag NPs and the robust metal-organic framework (MOF), ZIF-8, and report the presence of the Cu-Ag yolk-shell nanoalloy based heterogeneous catalysts, Cu@Ag and Cu@Ag@ZIF-8. The latter exhibits a crystalline "raisin bread" structure and specific synergic activity for catalyzing the tandem reactions of intra-molecular H-transfer, C-C and C-O coupling, cyclization, and carboxylation from CO2, leading to the first non-homogeneous preparation of dihydroisobenzofuran derivatives in high yield, selectivity, and recyclability under mild conditions. Theoretical calculations elucidate the tandem reaction pathway synergically catalyzed by Cu@Ag@ZIF-8, which offers insights for designing multiphase catalysts towards both organic synthesis and CO2 fixation through tandem processes in one pot.

Advances in zeolitic-imidazolate-framework-based catalysts for photo-/electrocatalytic water splitting, CO2 reduction and N2 reduction applications

Harnessing electrical or solar energy for the renewable production of value-added fuels and chemicals through catalytic processes (such as photocatalysis and electrocatalysis) is promising to achieve the goal of carbon neutrality. Owing to the large number of highly accessible active sites, highly porous structure, and charge separation/transfer ability, as well as excellent stability against chemical and electrochemical corrosion, zeolite imidazolate framework (ZIF)-based catalysts have attracted significant attention. Strategic construction of heterojunctions, and alteration of the metal node and the organic ligand of the ZIFs effectively regulate the binding energy of intermediates and the reaction energy barriers that allow tunable catalytic activity and selectivity of a product during reaction. Focusing on the currently existing critical issues of insufficient kinetics for electron transport and selective generation of ideal products, this review starts from the characteristics and physiochemical advantages of ZIFs in catalytic applications, then introduces promising regulatory approaches for advancing the kinetic process in emerging CO2 reduction, water splitting and N2 reduction applications, before proposing perspective modification directions.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Strong Metal Support Effect of Pt/g-C3N4 Photocatalysts for Boosting Photothermal Synergistic Degradation of Benzene

Catalysis is the most efficient and economical method for treating volatile organic pollutants (VOCs). Among the many materials that are used in engineering, platinized carbon nitride (Pt/g-C₃N₄) is an efficient and multifunctional catalyst which has strong light absorption and mass transfer capabilities, which enable it to be used in photocatalysis, thermal catalysis and photothermal synergistic catalysis for the degradation of benzene. In this work, Pt/g-C₃N₄ was prepared by four precursors for the photothermal synergistic catalytic degradation of benzene, which show different activities, and many tests were carried out to explore the possible reasons for the discrepancy. Among them, the Pt/g-C₃N₄ prepared from dicyanamide showed the highest activity and could convert benzene (300 ppm, 20 mL·min^-1) completely at 162 °C under solar light and 173 °C under visible light. The reaction temperature was reduced by nearly half compared to the traditional thermal catalytic degradation of benzene at about 300 °C.

Single-site bipyridine cobalt complexes covalently embedded into graphitic carbon nitride with excellent photocatalytic activity and selectivity towards CO2 reduction

A combination of a semiconductor-based photosensitizer with molecular catalysts via covalent bonds is an effective way to utilize solar energy to reduce CO₂ into value-added chemicals with high efficiency and selectivity. In this study, 2,2'-bpy-5,5'-dialdehyde functioned as organic ligands and were embedded into the skeleton of g-CN through imine bonds via thermal copolymerization. The introduction of 2,2'-bpy can not only chelate with earth-abundant Co as single-site catalytic centers but also can optimize the properties of original g-CN such as the enlarged specific surface area and extended visible light absorption range. The CO evolution rate of g-CN-bpy-Co can reach up to 106.3 μmol g^-1 h^-1 with a selectivity of 97% over proton reduction, which was 82-fold than that of g-CN-Co. The different coordination environments and valence states of cobalt were also studied simultaneously and the results showed that Co(II) exhibited superior catalytic activity towards Co(III). Control experiments demonstrated that the covalent linkage between g-CN and Co-2,2'-bpy plays a vital role in photocatalytic activity and selectivity. Besides, the CO generation rate demonstrated linear growth upon visible light irradiation up to 72 h and preferable recyclability. This research provides a new facile way to fabricate low-priced photocatalysts with high activity and selectivity and bridge homogeneous and heterogeneous catalysis.