A MOF-derived hollow Co3O4/NiCo2O4 nanohybrid: a novel anode for aqueous lithium ion batteries with high energy density and a wide electrochemical window

CoO/MoO3@Nitrogen-Doped carbon hollow heterostructures for efficient polysulfide immobilization and enhanced ion transport in Lithium-Sulfur batteries

Lithium-sulfur batteries (LSBs) have emerged as a promising energy storage system, but their practical application is hindered by the polysulfide shuttle effect and sluggish redox kinetics. To address these challenges, we have developed CoO/MoO3@nitrogen-doped carbon (CoO/MoO3@NC) hollow heterostructures based on porous ZIF-67 as separators in LSBs. CoO has a strong anchoring effect on polysulfides. The heterostructure formed after the introduction of MoO3 increases the adsorption of polysulfides. The carbon coating outside the heterostructure improves the ion transmission efficiency of the battery, leading to enhanced electrochemical performance. The modified LSB demonstrates a low-capacity decay rate of 0.092% over 500 cycles at 0.5C, with a high discharge capacity of 613 mAh g-1 at 1C. This work presents a novel approach for the preparation of hollow heterostructure materials, aiming for high-performance LSBs.

Porous NiMoO4 Nanosheet Films and a Device with Ultralarge Optical Modulation for Electrochromic Energy-Storage Applications

Reducing building energy consumption, improving aesthetics, and improving occupant privacy as well as comfort by dynamically adjusting solar radiation are important application areas for electrochromic (EC) smart windows. However, the current transition metal oxides still cannot meet the requirements of neutral coloration and large optical modulation. We report NiMoO4 nanosheet films directly grown on fluorine-doped tin oxide glasses. The as-grown NiMoO4 film not only achieves neutral coloration from transparent to dark brown but also shows an ultralarge optical modulation (86.8% at 480 nm) and excellent cycling stability (99.4% retention of maximum optical modulation after 1500 cycles). Meanwhile, an EC device demonstrating good EC performance was constructed. These results will greatly promote the research and development of binary transition metal oxides for both EC and energy-storage applications, and NiMoO4 films may be an excellent candidate to replace NiO films as ion-storage layers in complementary EC devices with WO3 films as EC layers.

MOF-derived porous carbon nanozyme-based flexible electrochemical sensing system for in situ and real-time monitoring of H2O2 released from cells

A novel flexible electrochemical sensor based on porous carbon nanosheets (PCNSs) nanozyme has been constructed for in situ and real-time monitoring of H2O2 released by cells. The PCNSs are prepared with the integration of thermal transformation, thermal activation and sonochemical exfoliation by using zeolitic imidazolate frameworks as template. The PCNSs exhibit high electrical conductivity, electrochemical activity and peroxidase-like catalytic properties, which is beneficial to H2O2 assay. With the transfer printing method, the flexible electrochemical sensor is obtained, which has excellent performances for H2O2 electrochemical detecting with wide linear range from 1 μM to 20 mM and a low detection limit of 0.76 μM. Owing to the great biocompatibility, the flexible sensor guarantees the growth of living cells for 72 h and realizes in situ and real-time monitoring the release of H2O2 from HeLa cells. The strategy of porous nanozyme preparation and flexible sensor construction provided a promising way for in situ and real-time assay of small molecules in the cellular microenvironment.