In situ fabrication of MIL-68(In)@ZnIn2S4 heterojunction for enhanced photocatalytic hydrogen production

A new Ni-based cocatalyst nickel thiocarbonate enhancing graphitic carbon nitride photocatalytic hydrogen production by constructing a built-in electric field

Despite the excellent photocatalytic activity under visible light, graphitic carbon nitride (g-C3N4) exhibits a high overpotential for hydrogen evolution. To address this issue, cocatalysts have been utilized to modify g-C3N4. However, the use of high-performance cocatalysts typically involves noble metals such as platinum and palladium, which are cost-prohibitive for practical applications. Therefore, the development of efficient and cost-effective cocatalysts is crucial for advancing photocatalysis. In this study, we synthesized a new Ni-based cocatalyst, nickel thiocarbonate (NiCS3), to enhance the photocatalytic hydrogen evolution reaction (HER) on g-C3N4. The NiCS3/g-C3N4 composite demonstrated a significantly increased hydrogen evolution rate of 951 μmol·h-1·g-1 under visible light, representing more than a 105-fold improvement compared to pure g-C3N4. Theoretical calculations suggested that the enhanced performance in photocatalytic hydrogen production can be attributed to the generation of a built-in electric field within the composite, facilitating efficient charge carrier separation and migration. Additionally, the C site in NiCS3 provides a favorable Gibbs free energy of adsorbed H* (ΔGH∗). This work underscores the potential of NiCS3 as a viable alternative to precious metals in photocatalytic hydrogen production using g-C3N4.

Photo-Stimulated Zn-based Batteries: Progress, Challenges, and Perspectives

Solar energy, as a renewable energy source, dominates the vast majority of human energy, which can be harvested and converted by photovoltaic solar cells. However, the intermittent availability of solar energy restricts the actual utilization circumstances of solar cells. Integrating photo-responsive electrodes into an energy storage device emerges as a dependable and executable strategy, fostering the creation of photo-stimulated batteries that seamlessly amalgamate the process of solar energy collection, conversion, and storage in one system. Endowed by virtues such as cost-effectiveness, facile manufacturing, safety, and environmental friendliness, photo-stimulated Zn-based batteries have attracted considerable attention. The progress report furnishes a brief overview, summarizing various photo-stimulated Zn-based batteries. Their configurations, operational principles, advancements, and the intricate engineering of photoelectrode designs are introduced, respectively. Through rigorous architectural design, photo-stimulated Zn-based batteries exhibit the ability to initiate charging by saving electricity usage, and in certain instances, even without the need for external electrical grids under illumination. Furthermore, the compensation of solar energy can be explored to improve the output electric energy. At last, opportunities and challenges toward photo-stimulated Zn-based batteries in the process of development are proposed and discussed in the hope of expanding their application scenarios and accelerating the commercialization progress.

Rational Design of MIL-68(In) Derived Multiple Sulfides with Well Confined Quantum Dots and the Promoted Photocatalytic Hydrogen Generation

Quantum dots (QDs) of metal sulfides were proven to be excellent cocatalysts in visible-light-driven photocatalytic reactions. Metal organic frameworks (MOFs) possess a 3D porous channel that effectively confines small QDs and preserves their high catalytic activity by preventing their aggregation. In order to precisely construct the ternary metal sulfides of ZnS/ZnIn2S4/In2S3 with well-maintained Zn-AgInS2 (ZAIS) QDs, an in situ sulfurization combining a subsequent Zn(II)-exchange strategy was employed in this work. First, the ZAIS QDs were incorporated into MIL-68(In), which were then used as the precursors to precisely construct the ternary metal sulfides of ZnS/ZnIn2S4/In2S3 with well maintained ZAIS QDs through an in situ sulfurization combining subsequent Zn(II)-exchange strategy. When the optimized nanocomposites (QDs@M-t-Zn, where t is the sulfurization time) were applied in visible light-induced photocatalytic hydrogen generation, the resulting QDs@M-24h-Zn showed a significantly improved hydrogen evolution rate of 448.96 μmol g-1 h-1, which values are clearly higher than those of MIL-68(In), QDs@MIL-68(In), and M-24h-Zn without the presence of ZAIS QDs. To elucidate the increased photocatalytic mechanism, the optical patterns and the batch electrochemical investigations were combined. It has been discovered that the matching band potentials and the close contact heterojunction enhance interface charge transfer, which in turn encourages photocatalytic hydrogen production. This study demonstrates the well-thought-out design of the uniform confinement architecture inherited from MOF QD-assisted multinary metal sulfides photocatalysts.

ZnIn2S4 Heterojunctions Constructed with In-MOF Precursor for Photocatalytic Hydrogen Evolution without Cocatalysts

Znln2S4 has great prospects for photocatalytic water splitting to hydrogen by visible light. Herein, a novel Znln2S4-In-MOF (ZnInMS4) photocatalyst is elaborately synthesized by in situ method with In-MOF as the template and In3+ as the source. ZnInMS4 overcomes the fast interface charge recombination and a sluggish charge lifetime via the formed heterojunctions. Photoelectrochemical measurements reveal that the charge-transfer kinetics is enhanced since In-MOF is introduced to act as a reliable charge-transport channel. ZnInMS4 exhibits outstanding cocatalyst-free H2 evolution rate of 70 μmol h-1 under irradiation (λ > 420 nm), which is 3.2-fold higher than that of Znln2S4. In addition, the ZnInMS4 photocatalyst shows good stability in the 16 h continuous reaction. This work illustrates the feasibility of the MOF precursor instead of inorganic salts to directly synthesize photocatalysts with high performance.

Construction of S-scheme CuInS2/ZnIn2S4 heterostructures for enhanced photocatalytic activity towards Cr(VI) removal and antibiotics degradation

The efficient and ecofriendly removal of pharmaceutical antibiotics and heavy metal Cr(VI) from water sources is a crucial challenge in current environmental management. Photocatalysis presents a viable environmentally friendly solution for eliminating organic contaminants and heavy-metal ions. In this study, a novel S-scheme CuInS2/ZnIn2S4 (CIS/ZIS) heterojunction was developed using a one-pot solvothermal method. The optimized CIS/ZIS heterojunction exhibited considerably improved photocatalytic activity for the removal of antibiotics and Cr(VI), achieving over 90% removal for both tetracycline hydrochloride (TC) (20 mg/L) and Cr(VI) (20 mg/L) under visible light irradiation. The study also delved into the effect of coexisting inorganic anions and assessed the cyclic stability of the composite photocatalysts. This enhancement mechanism can be delineated into three key elements. First, the incorporation of the narrow-gap semiconductor CuInS2 effectively augmented the photoabsorption capacity. Second, the inclusion of ZnIn2S4 caused an increase in surface active sites. Most importantly, the internal electric field at the interface between CuInS2 and ZnIn2S4 expedited the separation of photogenerated carriers. Furthermore, the results revealed that superoxide radical and photogenerated holes are the primary active substance responsible for TC removal, while photogenerated electrons play a central role in the photoreduction of Cr(VI). To gain insights into the transport pathways of photogenerated carriers, we conducted experiments with nitrotetrazolium blue chloride (NBT) and photodeposited gold. This study offers an innovative approach to enhancing the photocatalytic performance of ternary In-based materials by constructing S-scheme heterojunctions.

Metallic 1T phase molybdenum disulfide cocatalyst with abundant edge and substrate active sites for enhanced photocatalytic hydrogen production activity of zinc indium sulfide nanoflowers

The formation of composites by loading co-catalysts on semiconductor photocatalysts to improve hydrogen (H2) evolution performance is a feasible strategy. Metallic 1T phase molybdenum disulfide (MoS2) as cocatalysts were decorated on zinc indium sulfide (ZnIn2S4) nanoflowers by a grinding method to construct 1T-MoS2@ZnIn2S4 composites. The H2 production rate of 1T-MoS2@ZnIn2S4 composites with optimum 7 wt% 1T-MoS2 loading achieves 15.6 mmol g-1 h-1, 5.5 times higher than ZnIn2S4 nanoflowers. The apparent quantum efficiency (AQY) increases from 3.1 % (ZnIn2S4 nanoflowers) to 13.0 % (1T-MoS2@ZnIn2S4 composites) under the wavelength light irradiation at λ = 370 nm. The loading of metallic 1T-MoS2 with abundant edge and substrate active sites on ZnIn2S4 can enhance visible light absorption, promote the transfer of electrons, and inhibit carrier recombination, thereby improving photocatalytic performance. This work offers inspiration for the design of composite photocatalysts with efficient photocatalytic capabilities.

MOF-Based Photocatalytic Membrane for Water Purification: A Review

Photocatalytic membranes can effectively integrate membrane separation and photocatalytic degradation processes to provide an eco-friendly solution for efficient water purification. It is of great significance to develop highly efficient photocatalytic membranes driven by visible light to ensure the long-term stability of membrane separation systems and the maximum utilization of solar energy. Metal-organic framework (MOF) is an emerging photocatalyst with a well-defined structure and tunable chemical properties, showing a broad application prospect in the construction of high-performance photocatalytic membranes. Herein, this work provides a comprehensive review of recent advancements in MOF-based photocatalytic membranes. Initially, this work outlines the main tailoring strategies that facilitate the enhancement of the photocatalytic activity of MOF-based photocatalysts. Next, this work introduces commonly used methods for fabricating MOF-based photocatalytic membranes. Subsequently, this work discusses the application and mechanisms of MOF-based photocatalytic membranes toward organic pollutant degradation, metal ion removal, and membrane fouling mitigation. Finally, challenges in developing MOF-based photocatalytic membranes and their practical applications are presented, while also pointing out future research directions toward overcoming these existing limitations.

Carbon Dots as an Electron Acceptor in the ZnIn2S4@MIL-88A Heterojunction for Enhanced Visible-Light-Driven Photocatalytic Hydrogen Evolution

In this study, visible-light-responsive carbon dots (CDs)/ZnIn2S4@MIL-88A (C/ZI@ML) photocatalysts were successfully prepared through in situ loading CDs and ZnIn2S4 nanosheets on MIL-88A(Fe) to form a ternary heterojunction. The detailed characterization indicated that the two-dimensional ZnIn2S4 nanosheets were uniformly coated on the surface of MIL-88A(Fe), and ZnIn2S4/MIL-88A(Fe) exhibited enhanced photocatalytic hydrogen production performance (1259.63 μmol h-1 g-1) compared to that of pristine MIL-88A(Fe) and ZnIn2S4 under visible light illumination. After introduction of CDs into ZnIn2S4/MIL-88A(Fe), the C/ZI@ML catalyst remarkably enhanced the photocatalytic activity and the hydrogen evolution rate of 1C/ZI@ML was up to 3609.23 μmol g-1 h-1. The photoinduced charge carriers of C/ZI@ML can be efficiently separated and migrated because of the close contacted interface, synergistic effect, and suitable band structure. In combination with photoelectrochemical experiments and electron paramagnetic resonance spectra, a possible photocatalytic mechanism over C/ZI@ML was proposed. This work demonstrated a facile preparation method for fabricating efficient visible-light-driven heterojunction photocatalysts.

A tube-like Pd@coordination polymer with enhanced solar light harvesting for boosting photocatalytic H2 production in a wide pH range and seawater

Coordination polymers (CPs) have emerged as promising candidates for photocatalytic H₂ production owing to their structural tailorability and functional diversity. However, the development of CPs with high energy transfer efficiency for highly efficient photocatalytic H₂ production in a wide pH range still faces many challenges. Here we constructed a novel tube-like Pd(ii) coordination polymer with well-distributed Pd nanoparticles (denoted as Pd/Pd(ii)CPs) based on the coordination assembly of rhodamine 6G and Pd(ii) ions and further photo-reduction under visible light irradiation. Both the Br^- ion and double solvent play a key role in forming the hollow superstructures. The resulting tube-like Pd/Pd(ii)CPs exhibit high stability in aqueous solution with the pH range from 3 to 14 due to the high Gibbs free energies of protonation and deprotonation, which provides the feasibility of photocatalytic hydrogen generation in a wide pH range. Electromagnetic field calculations showed that the tube-like Pd/Pd(ii)CPs have a good confinement effect on light. Therefore, the H₂ evolution rate could reach 112.3 mmol h^-1 g^-1 at pH 13 under visible light irradiation, which is far superior to those of reported coordination polymer-based photocatalysts. Moreover, such Pd/Pd(ii)CPs could also reach a H₂ production rate of 37.8 mmol h^-1 g^-1 in seawater under visible light with low optical density (40 mW cm^-2) close to morning or cloudy sunlight. The above unique characteristics make the Pd/Pd(ii)CPs possess great potential for practical applications.