A facile chemical synthesis of nanoflake NiS2 layers and their photocatalytic activity

Rapid catalytic reduction of environmentally toxic azo dye pollutant by Prussian blue analogue nanocatalyst

The release of toxic azo dyes pollutants in the environment from different industries represents a public health concern and a serious environmental problem. Therefore, the conversion of hazardous methyl orange (MO) azo dye to environmentally benign products is a critical demand. In this work, an eco-friendly Prussian blue analogue (PBA) was synthesized and its catalytic activity toward the reduction of MO was investigated. The PBA copper(ii) hexacyanocobaltate(III) (Cu3[Co(CN)6]2) was synthesized by a facile inexpensive chemical coprecipitation method without using hazardous solvents. The nanocatalyst was characterized using XPS, Raman, FTIR spectroscopy, and XRD. The chemical reduction of MO using NaBH4 and the PBA as nanocatalyst was monitored by UV-VIS spectroscopy. Toxic MO was completely reduced in 105 s with a rate constant (k) 0.0386 s-1 using only 10 μg of the PBA nanocatalyst. Besides the powerful catalytic activity, the nanocatalyst also showed excellent stability and recyclability for ten consecutive cycles, with no significant decrease in the catalytic performance. Therefore, the proposed PBA is a promising, stable, cost-effective, and eco-friendly nanocatalyst for the rapid elimination of hazardous azo dyes.

Phosphorus-doped synergy of phase change in heterogeneous catalysts of NiS-NiS2 for efficient electrocatalysis of Pb(II)

A fundamental understanding of the electroanalytical activity of transition metal sulfide electrocatalysts, especially the origin of the electrocatalytic reactivity on the surface sites of heterostructures with multiple crystalline phases, is essential for the design of low-cost and highly efficient nonprecious metal electrocatalysts for further scientific and technological achievements. Herein, we injected P into NiS and occupied the S sites through a doping strategy. The redistributed electronic structure induced the construction of heterostructures, which significantly improved the structure and chemical state of electrochemically inert NiS. The phase-change mechanism between NiS and NiS2 synergistically catalyzes Pb(II), while the P and S sites jointly lose electrons. Moreover, the constructed heterojunction sensor shows the a sensitivity of 83.43 μA μM-1 to Pb(II) with a theoretical limit of detection of 48 nM, as well as excellent stability, reproducibility, and anti-interference ability. The accurate detection in real water further reveals the potential of this sensor for practical applications. This study provides a guiding strategy for improving electrochemically inert materials to design highly active electrocatalytic interfaces, which has important implications for the development of highly efficient electrode-sensitive materials similar to precious metals to achieve accurate electrical analysis.

Synthesis of Sb2S3 nanosphere layer by chemical bath deposition for the photocatalytic degradation of methylene blue dye

An antimony tri-sulfide Sb₂S₃ nanosphere photocatalyst was effectively deposited utilizing sodium thiosulfate and antimony chloride as the starting precursors in a chemical bath deposition process. This approach is appropriate for the large-area depositions of Sb₂S₃ at low deposition temperatures without the sulfurization process since it is based on the hydrolytic decomposition of starting compounds in aqueous solution. X-ray diffraction patterns and Raman spectroscopy analysis revealed the formation of amorphous Sb₂S₃ layers. The scanning electron microscopy images revealed that the deposited Sb₂S₃ has integrated small nanospheres into sub-microspheres with a significant surface area, resulting in increased photocatalytic activity. The optical direct bandgap of the Sb₂S₃ layer was estimated to be about 2.53 eV, making amorphous Sb₂S₃ appropriate for the photodegradation of organic pollutants in the presence of solar light. The possibility of using the prepared Sb₂S₃ layer in the photodegradation of methylene blue aqueous solutions was investigated. The degradation of methylene blue dye was performed to evaluate the photocatalytic property of Sb₂S₃ under visible light. The amorphous Sb₂S₃ exhibited photocatalytic activity for the decolorization of methylene blue solution under visible light. The mechanism for the photocatalytic degradation of methylene blue has been proposed. Our results suggest that the amorphous Sb₂S₃ nanospheres are valuable material for addressing environmental remediation issues.

Designing Highly Active S-g-C3N4/Te@NiS Ternary Nanocomposites for Antimicrobial Performance, Degradation of Organic Pollutants, and Their Kinetic Study

The current research is about the synthesis of pure nickel sulfide, a series of Te (0, 0.5, 1, 1.5, 2, and 3 wt.%)-doped NiS (Te@NiS) nanoparticles (NPs), and a series of S-g-C3N4 (10, 30, 50, 70, and 80 wt.%)/Te@NiS nanocomposites (NCs), fabricated through a hydrothermal route. XRD and FTIR spectroscopic techniques demonstrated the successful synthesis of NPs and NCs. SEM-EDX images confirmed the flakelike structure and elemental constituents of the fabricated materials. Tauc plots were drawn, to calculate the band gaps of the synthesized samples. Te doping resulted in a significant reduction in the band gap of the NiS NPs. The photocatalytic efficiency of the NPs and NCs was investigated against MB, under sunlight. The results obtained for the photocatalytic activity, showed that 1%Te@NiS nanoparticles have an excellent dye degradation capacity in sunlight. This was made even better by making a series of SGCN/1% Te@NiS nanocomposites with different amounts of S-g-C3N4. When compared to NiS, Te@NiS, SGCN, and 70%SGCN/1%Te@NiS, the 70%SGCN/1%Te@NiS NCs have excellent antifungal ability. The higher impact of SGCN/Te@NiS, may be due to its enhanced ability to disperse and interact with the membranes and intracellular proteins of fungi. The 70%SGCN/1%Te@NiS NCs showed excellent antibacterial and photocatalytic efficiency. Thus, the 70%SGCN/1%Te@NiS NCs might prove fruitful in antibacterial and photocatalytic applications.