Synthesis of a UiO-66/g-C3N4 composite using terephthalic acid obtained from waste plastic for the photocatalytic degradation of the chemical warfare agent simulant, methyl paraoxon

Efficient photocatalytic activity and selective adsorption of UiO-67 (Zr)/g-C3N4 composite toward a mixture of parabens

In this study, UiO-67/g-C3N4composites (U67N) were synthesized at wt.% ratios of 05:95, 15:85, and 30:70 using the solvothermal method at 80°C for 24 h followed by calcination at 350°C. The composites were characterized using UV-vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence (PL) spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy-energy-dispersive X-ray spectroscopy, transmission electron microscopy, and nitrogen physisorption analysis. In addition, thermal stability analysis of UiO-67 was conducted using thermogravimetric analysis. The photocatalytic performance of the composites was assessed during the degradation and mineralization of a mixture of methylparaben (MeP) and propylparaben (PrP) under simulated sunlight. The adsorption process of U67N 15:85 was characterized through kinetic studies and adsorption capacity experiments, which were modeled using pseudo-first-order and pseudo-second-order kinetics and Langmuir and Freundlich isotherms, respectively. The influence of pH levels 3, 5, and 7 on the photocatalytic degradation of the mixture was investigated, revealing enhanced degradation and mineralization at pH 3. The U67N composite exhibited dual capability in removing contaminants through adsorption and photocatalytic processes. Among the prepared composites, U67N 15:85 demonstrated the highest photocatalytic activity, achieving removal efficiencies of 96.8% for MeP, 92.5% for PrP, and 45.7% for total organic carbon in 300 kJ/m2 accumulated energy (3 h of reaction time). The detoxification of the effluent was confirmed through acute toxicity evaluation using the Vibrio fischeri method. The oxidation mechanism of U67N 15:85 was proposed based on PL analysis, photoelectrochemistry analysis (including photocurrent response, Nyquist, and Mott-Schottky analyses), and scavenger assays.

Non-enzymatic electrochemical impedance sensor for selective detection of electro-inactive organophosphate pesticides using Zr-MOF/ZrO2/MWCNT ternary composite

The existence of multiple pesticide residues in fruits and vegetables constitutes a direct peril to living organisms. Therefore, it is crucial to develop a low-cost screening method for determining organophosphate pesticides (OPPs) in food samples. This study describes the solvothermal synthesis of a ternary composite comprising multi-walled carbon nanotubes (MWCNT), zirconium oxide, and a zirconium-metal-organic framework (Zr-MOF). The ternary composite was characterised using XRD, FESEM, FTIR, and BET. The ternary composite provides a large surface area (1158 m2/g) compared with the pristine Zr-MOF (868 m2/g). The composite-modified glassy carbon electrode was used to determine nine pesticides, including organophosphate (malathion, dimethoate, chlorpyrifos, monocrotophos, and glyphosate) and non-organophosphate (thiophanate methyl, carbendazim, atrazine, and 2,4, D). In particular, various chemical combinations of OPPs were selected, such as S-P=S, P=S, P=O, and non-OPPs such as C=S (with sulphur), and without sulphur. The sensor results show that the sensor selectivity is high for OPPs containing both phosphorus and sulphur molecules. The low detection limit of the sensor was 2.02, 2.8, 2.5, 1.11, and 2.01 nM for malathion, chlorpyrifos, dimethoate, monocrotophos, and glyphosate, respectively. The electrode exhibited significant chemical stability (93%) after 100 cycles, good repeatability, and a long shelf life. The sensor is reliable for qualitative real-time applications.

Sustainable conversion of polyethylene plastic bottles into terephthalic acid, synthesis of coated MIL-101 metal-organic framework and catalytic degradation of pollutant dyes

Persistent environmental colored compounds, resistant to biodegradation, accumulate and harm eco-systems. Developing effective methods to break down these pollutants is crucial. This study introduces Ag-MIL-101 (Ag-MIL-101) as a composite and reusable catalyst that efficiently degrades specific colored organic pollutants (COPs) like Methylene blue (MB), 4-Nitrophenol (4-NP), and 4-Nitroaniline (4-NA) using sodium borohydride at room temperature. The MIL-101 was synthesized using Terephthalic acid (TPA) derived from the degradation of Polyethylene Terephthalate (PET) plastic waste, with the assistance of zinc chloride. To further investigation, the kinetics of degradation reaction was studied under optimized conditions in the presence of Ag-MIL-101 as catalyst. Our results demonstrated the remarkable efficiency of the degradation process, with over 93% degradation achieved within just 8 min. The catalyst was characterized using FTIR, XRD, FESEM, and TEM. In this study, the average particle size of Ag-MIL-101 was determined using SEM and XRD analysis. These methods allow us to accurately and precisely determine the particle size. We determined the reaction rate constants for the degradation of each COP using a pseudo first-order kinetic equation, with values of 0.585, 0.597 and 0.302 min-1 for MB, 4-NP, and 4-NA, respectively. We also evaluated the recyclability of the catalyst and found that it could be reused for up to three cycles with only a slight decrease in efficiency (10-15%). Overall, our findings highlight the promising application of Ag-MIL-101 as an effective catalyst for the degradation of COPs, emphasizing the importance of optimizing reaction conditions to achieve enhanced efficiency.

Sono-assisted photocatalytic degradation of ciprofloxacin in aquatic media using g-C3N4/MOF-based nanocomposite under visible light irradiation

This research study is centered on the sono-assisted photocatalytic degradation of a well-known antibiotic (ciprofloxacin; CIP) in aquatic media using a g-C3N4/NH2-UiO-66 (Zr) catalyst under visible light irradiation. Initially, the catalyst was prepared by a simple method, and its physiochemical features were thoroughly analyzed by XRD, FT-IR, FE-SEM, EDX, EDS-Dot-Mapping, and UV-Vis analytical techniques. After that, the impact of several influential factors affecting the performance of the applied sono-assisted photocatalytic process such as the initial concentration of CIP, solution pH, catalyst dosage, light intensity, and ultrasound power was fully assessed, and the optimal conditions were established. After 75 min of the sono-assisted photocatalytic treatment, the complete degradation of CIP (10 mg/L) was accomplished under the condition as follows: g-C3N4/NH2-UiO-66 (Zr), 0.6 g/L; pH, 5.0, and ultrasound power, light intensity 75 mw/cm2, 200 W/m2. Meanwhile, the photocatalytic degradation of CIP followed the pseudo-first-order kinetic model. In addition, the scavenger experiments demonstrated that OH˚ and O2°- radicals played a key role in the sono-assisted photocatalytic degradation process. It is also acknowledged that the applied catalyst was reused for five consecutive runs with a minor loss observed in its degradation efficiency. In a further experiment, a significant synergistic effect with regard to the degradation of CIP was observed once all three major parameters (visible light, ultrasound waves, and catalyst) were used in combination compared to each used alone. To sum up, it is thought that the integration of g-C3N4/MOF-based catalyst, ultrasound waves, and visible light irradiation could be potentially applied as a promising strategy for the degradation of various pharmaceuticals on account of high degradation performance, simple operation, excellent reusability, and eco-friendly approach.

Facile Recycling Strategy of Dyed Polyester Waste by Template-Based Synthesis of UiO-66 for Value-Added Transformation into Self-detoxifying Fabrics

Polyethylene terephthalate (PET) accounts for a significant portion of textile waste, and recycling strategies for this material have attracted much attention. This study proposes a facile and innovative PET recycling method applicable to environmental remediation that involves the conversion of dyed PET fabric waste into a value-added fabric. Herein, a template-based synthesis approach capable of growing a UiO-66 metal-organic framework (MOF) directly on a dyed PET fabric is reported. The advantage of this process lies in its simplicity, where the partial hydrolysis of PET followed by a zirconium chloride treatment results in the successful growth of UiO-66 on a dyed PET fabric with the concurrent removal of the dye without additional steps. The catalytic performance of the UiO-66-grown fabric was evaluated through the degradation of dimethyl 4-nitrophenyl phosphate (DMNP), a nerve agent simulant. The fabric produced by the simple metal treatment (Zr@PEThyd) exhibited excellent DMNP degradation performance with t1/2 = 43.3 min and maintained functional stability after a harsh washing procedure, an outcome attributed to the surface-assisted UiO-66 growth that ensured good bonding stability. The developed process is innovative in that it uses dyed PET waste as a template for the direct growth of UiO-66, simplifying the process without compromising the catalytic functionality. This research provides an informative option for a sustainable textile recycling strategy by transforming dyed PET waste into an advanced self-detoxifying material.

Ternary heterogeneous Z-scheme photocatalyst TiO2/CuInS2/OCN incorporated with carbon quantum dots (CQDs) for enhanced photocatalytic degradation efficiency of reactive yellow 145 dye in water

This study delves into the advanced integration of a ternary heterogeneous Z-scheme photocatalyst, TiO2/CuInS2/OCN (OCN: O-g-C3N4), with carbon quantum dot (CQD) to improve the degradation efficiency of reactive yellow 145 (RY145) dye in water. Through a systematic examination, we elucidated the photocatalytic mechanisms and the role of radicals, electrons, and holes in the treatment process. Our findings revealed that this novel catalyst integration significantly boosted RY145 degradation efficiency, achieving 98.2%, which is markedly higher than the efficiencies which could be achieved using TiO2/CuInS2/OCN alone. Moreover, the TiO2/CuInS2/OCN/CQD photocatalyst demonstrated superior rate performance over its components. Comprehensive evaluations, including photoelectrochemical and radical tests, further confirmed the efficiency of the integrated system, adhering to Z-scheme principles. The catalyst showcased remarkable stability, with over 94% reusability after five reaction cycles. These findings pave the way for the potential use of the TiO2/CuInS2/OCN/CQD photocatalyst as an innovative solution for water pollutant treatment via photocatalytic technology.

Exploring the potential of ZnO-Ag@AgBr/SBA-15 Z-scheme heterostructure for efficient wastewater treatment: synthesis, characterization, and real-world applications

This study reports on the synthesis and characterization of ZnO-Ag@AgBr/SBA-15 composites using natural halloysite clay from Yenbai Province, Vietnam, as a silica aluminum source. The synthesized materials demonstrated visible light absorption with a band gap energy range of 2.63-2.98 eV. The dual Z-scheme ZnO-Ag@AgBr/SBA-15 heterojunction exhibited superior catalytic performance compared to ZnO/SBA-15 and Ag@AgBr/SBA-15, owing to its improved electron transfer and reduced electron and hole recombination rate. In particular, the photocatalytic efficiency of ZnO-Ag@AgBr/SBA-15 was evaluated for the removal of harmful phenol red from wastewater under visible light irradiation. The photocatalytic process was optimized by varying the phenol red concentration, pH, and catalyst dosage, and showed that 98.8% of phenol red in 100 mL wastewater (pH = 5.5) can be removed using 40 mg of 20%ZnO-Ag@AgBr/SBA-15 within 120 min. Furthermore, the degradation pathway of phenol red was predicted using liquid chromatographic-mass spectrometry (LC-MS). Finally, the photocatalytic process was successfully tested using water samples collected from the four main domestic waste sources in Hanoi, including the To Lich River, the Hong River, the Hoan Kiem Lake, and the West Lake, demonstrating the high potential of the ZnO-Ag@AgBr/SBA-15 photocatalyst for phenol red degradation in real-world wastewater treatment applications.