Waste acrylonitrile butadiene styrene (ABS) incorporated with polyvinylpyrrolidone (PVP) for potential water filtration membrane

High Recovery of Ceramic Membrane Cleaning Remediation by Ozone Nanobubble Technology

The persistent issue of ceramic membrane fouling poses significant challenges to its widespread implementation. To address this concern, ozone nanobubbles (ozone-NBs) have garnered attention due to their remarkable mass transfer efficiency. In this investigation, we present a novel ozone-NB generator system to effectively clean a fouled ceramic membrane that is typically employed in the dye industry. The surface characteristics of the ceramic membrane underwent significant alterations, manifesting incremental changes in surface roughness and foulant accumulation reduction, as evidenced in atomic force microscopy, scanning electron microscopy, X-ray fluorescence, and energy-dispersive spectroscopy. Remarkably, the sequential 4 h cleaning process demonstrates an effective outcome leading to an almost 2-fold enhancement in the membrane flux. The initial fouled state of 608 L/h/m2 increased to 1050 L/h/m2 in the 4 h state with a recovery of 50%. We propose such membrane performance improvement governed by the ozone-NBs with a size distribution of 213.2 nm and a zeta potential value of -20.26 ± 0.13 mV, respectively. This effort showcases a substantial innovative and sustainable technology approach toward proficient foulant removal in water treatment applications.

Improving astaxanthin-loaded chitosan/polyvinyl alcohol/graphene oxide nanofiber membranes and their application in periodontitis

Periodontitis is a chronic inflammatory disease primarily driven by host inflammation and plaque-induced immune responses. Controlling the host inflammatory response and improving the periodontal inflammatory microenvironment are crucial to promoting periodontal tissue regeneration. In this study, the blended nanofiber membranes previously prepared by our research group were improved, and we developed multifunctional chitosan/polyvinyl alcohol/graphene oxide/astaxanthin coaxial nanofiber membranes. Scanning electron microscopy showed that the prepared nanofibers had a smooth surface and a uniform diameter distribution. The mechanical property test results showed that the coaxial nanofiber membranes exhibited higher tensile strength compared to the blended nanofiber membranes, which increased from 4.50 ± 0.32 and 3.70 ± 0.45 MPa to 7.12 ± 0.22 and 5.62 ± 0.79 MPa respectively. Drug release studies indicated that the "shell-core" structure of coaxial nanofibers significantly reduced the initial burst release of astaxanthin (ASTA), with only 13.49 % and 10.71 % release in the first 24 h, and drug release lasted for over a week. Animal experiments confirmed that the coaxial nanofiber membranes loaded with ASTA promoted periodontal bone defect repair while inhibiting periodontal inflammation. In conclusion, the prepared coaxial nanofiber membranes are a promising sustained-release drug system for treating periodontitis.

Electrospun Nanofibers from Waste Polyvinyl Chloride Loaded Silver and Titanium Dioxide for Water Treatment Applications

The electrospun nanofiber membrane from polyvinyl chloride (PVC) waste for water treatment applications has been successfully produced. The PVC precursor solution was prepared by dissolving the PVC waste in DMAc solvent, and a centrifuge was used to separate undissolved materials from the precursor solution. Ag and TiO₂ were added to the precursor solution before the electrospinning process. We studied the fabricated PVC membranes using SEM, EDS, XRF, XRD, and FTIR to study the fiber and membrane properties. The SEM images depicted that Ag and TiO₂ addition has changed the morphology and size of fibers. The EDS images and XRF spectra confirmed the presence of Ag and TiO₂ on the nanofiber membrane. The XRD spectra showed the amorphous structure of all membranes. The FTIR result indicated that the solvent completely evaporated throughout the spinning process. The fabricated PVC@Ag/TiO₂ nanofiber membrane showed the photocatalytic degradation of dyes under visible light. The filtration test on the membrane PVC and PVC@Ag/TiO₂ depicted that the presence of Ag and TiO₂ affected the flux and separation factor of the membrane.

High-Efficiency Water Filtration by Electrospun Expanded Polystyrene Waste Nanofibers

Nanofiber membranes were successfully synthesized from expanded polystyrene (EPS) waste with the addition of poly(vinylpyrrolidone) (PVP) for water microfiltration using the electrospinning method. The EPS-based nanofiber membranes exhibited a smooth morphology and were uniform in size. The concentration of the EPS/PVP solution changed some of the physical parameters of the nanofiber membrane, such as viscosity, conductivity, and surface tension. Greater viscosity and surface tension increase the nanofiber membrane diameter, whereas the addition of PVP results in hydrophilicity. Additionally, increasing the pressure increased the flux value of each variation of the nanofiber membranes. Furthermore, the rejection value was 99.99% for all variations. Finally, the use of EPS waste for nanofiber membranes is also beneficial for decreasing the amount of EPS waste in the environment and is an alternative to the current membranes available in the market for water filtration applications.

Fabrication and characterization of anti-rosacea 3D nanofibrous customized sheet masks as a novel scaffold for repurposed use of spironolactone with pre-clinical studies

The repurposed oral use of spironolactone (SP) as an anti-rosacea drug faces many challenges that hinder its efficacy and compliance. In this study, a topically applied nanofibers (NFs) scaffold was evaluated as a promising nanocarrier that enhances SP activity and avoids the friction routine that exaggerates rosacea patients' inflamed, sensitive skin. SP-loaded poly-vinylpyrrolidone (40% PVP) nanofibers (SP-PVP NFs) were electrospun. Scanning electron microscopy showed that SP-PVP NFs have a smooth homogenous surface with a diameter of about 426.60 nm. Wettability, solid state, and mechanical properties of NFs were evaluated. Encapsulation efficiency and drug loading were 96.34% ± 1.20 and 11.89% ± 0.15, respectively. The in vitro release study showed a higher amount of SP released over pure SP with a controlled release pattern. Ex vivo results showed that the permeated amount of SP from SP-PVP NFs sheets was 4.1 times greater than that of pure SP gel. A higher percentage of SP was retained in different skin layers. Moreover, the in vivo anti-rosacea efficacy of SP-PVP NFs using croton oil challenge showed a significant reduction in erythema score compared to the pure SP. The stability and safety of NFs mats were proved, indicating that SP-PVP NFs are promising carriers of SP.