Structural, electronic and thermoelectric properties of GeC and MXO (M = Ti, Zr and X = S, Se) monolayers and their van der Waals heterostructures

Mechanical strain effect on the optoelectronic properties and photocatalysis applications of layered AlN/GaN nanoheterostructure

CONTEXT

The aim of this work is to use first principles calculations to examine the effects of different mechanical strains on the optoelectronic and photocatalytic capabilities of the 2D/2D nanoheterostructure of AlN/GaN. By utilizing the lmBJ (Meta-GGA) and PBEsol (GGA) functional, the bandgap of the nanoheterostructure is calculated and found to be 4.89 eV and 3.24 eV. Simulated 2D AlN/GaN nanoheterostructure exhibits exceptional optical and electronic characteristics under applied biaxial tensile and compressive strains. The band gap changes from 4.89 to 3.77 eV, while the energy gap nature transitions from direct to indirect during tensile strain fluctuations of 0% to 8%. Strain is also found to have a significant effect on the optical absorption peaks. And a 0-8% rise in tensile strain causes the initial absorption peak of the 2D AlN/GaN nanoheterostructure to shift from 4.88 to 4.20 eV, which results in a 14% red shift in photon energy for every 2% change in strain. Furthermore, the optimum bandgap and band edge positions of the 2D AlN/GaN nanoheterostructure enable the water redox process to produce hydrogen and oxygen for wide range of pH. Thus, modification via strain may be an effective method for altering the optical as well as electronic characteristics of a 2D AlN/GaN nanoheterostructure, and this study may pave the way for new applications of this material in optoelectronic devices in the future.

METHODS

In the current work, density functional theory is used to explore every attribute of the 2D AlN/GaN nanoheterostructure. To characterize the electronic exchange-correlation, we used the PBEsol functional. In order to prevent any interlayer contact between periodicity of images, a vacuum is produced along the z-direction of approximately 10 Å. To increase the precision of bandgap prediction, the electronic and optical characteristics were computed using the meta-GGA lmBJ functional. To account for interlayer van der Waals interactions, nanoheterostructure computations were performed using the DFT-D3 functional.

Twist Proximity-Endowed Large Figure of Merit in a Band-Modulated CrI3/1T-MoS2 Moiré Superlattice

Moiré superlattices with a robust twist proximity effect in the low-dimensional regime can facilitate nanoscale thermoelectric devices. In pristine systems, the low efficiency and lack of proficient control of thermoelectric properties impede desirable advancements in the field of energy conversion. In the present study, we demonstrate remarkable macroscopic thermoelectric response as a consequence of microscopic band structure modulation via the twist proximity in an engineered CrI3/1T-MoS2 moiré superlattice. The local twist effect, which leads to the microscopic phenomena of electron localization, results in a comprehensive electronic structure modulation. Consequently, these local effects convolute the macroscopic thermoelectric effect. Additionally, flat bands and angle-dependent metallic to semiconducting transitions are observed at 10.89, 23.41, and 30° twist angles. We correlate the observed phenomenon with the augmented spin-charge transport and interconversion via the twist proximity effect in its semiconducting phase. The estimated ultralow electronic and lattice thermal conductivities further corroborate with the observed large figure of merit and Seebeck coefficient. The maximum values of the Seebeck coefficient and figure of merit are estimated to be ∼413 μV/K and ∼4.3 at 200 K for 30° under the constant time relaxation approach. The twist-endowed outstanding thermoelectric effect in moiré superlattices with band modulation unveils a distinctive approach to establish efficient thermoelectric devices.

Large thermoelectric transport in magnetically coupled CrI3/1T-MoS2vdW heterostructure via spin-charge interconversion

Low-dimensional materials with prominent thermoelectric (TE) effect play a pivotal role in realizing state-of-the-art nanoscale TE devices. The fusion of TE effect with the magnetism through seamless integration of TE and magnetic materials in the 2D limit offers access to control longitudinal as well as transverse TE properties via magnetic proximity effect. Herein, we design a van der Waals (vdW) heterostructure of metallic 1T-MoS2with promising TE properties and a layer-dependent magnetic CrI3material. The result highlights exotic electronic and magnetic configurations of the designed monolayer-CrI3/1T-MoS2vdW heterostructure, which show magnetically-coupled TE characteristics. The observed remarkable magnetic proximity stems from large magnetic anisotropy energy and spin polarization, which are found to be 2.21 meV Cr-1and 12.30%, respectively. To this end, the semiconducting CrI3layer with intrinsic magnetism leads to efficient control and tunability of the observed spin-correlated anomalous Nernst effect. Moreover, a large dimensionless figure of merit of ∼6 and a power factor of∼3.8×1011/τ∘ Wm-1K-2s-1near the Fermi level at 300 K endorse the rejuvenated TE effect. The strong relativistic spin-orbit coupling validates the significant correlation of TE properties with intrinsic magnetic configuration. The present study underscores the significance of the magnetic proximity-governed TE effect in vdW heterostructures to engineer low-dimensional TE devices.

Ab-initio study of strain-tunable g-GaN/BN nanoheterostructure for optoelectronic and photocatalytic applications

CONTEXT

Two-dimensional (2D) nanoheterostructures of materials, integrating various phase or materials into a single nanosheet have stimulated large-scale research interest for designing novel two dimensional devices. In contemporary analysis present work, we examined the structural and electronic properties of the isolated 2D BN and GaN monolayers. We have investigated the structural stability and optoelectronic and photocatalytic response of the g-GaN/BN nanoheterostructure along with its response to strain. Nanoheterostructure g-GaN/BN is predicted to be a direct bandgap semiconductor with wide gap of 4.45 eV, whose value can be effectively modulated by applied strain ( ϵ ) , ranging from 4.55 ( ϵ = - 4%) to 3.58 eV ( ϵ = 8%). We also discovered that the tensile strain of 8% can substantially tune the direct bandgap of nanoheterostructure to indirect band gap nature. Even more important, the biaxial tensile strain engineering accentuates an enhancement of optical absorption in the UV region, broadening the light harvesting of the g-GaN/BN nanoheterostructure with the shifting of first absorption peak from 4.64 ( ϵ = - 4%) to 3.71 eV ( ϵ = 8%). Furthermore, strain-tuned band edge potentials arrangement perfectly fits the water reduction and oxidation redox potentials. Our findings portend that the g-GaN/BN nanoheterostructure has application in prospective nanoscale optoelectronic devices and photocatalytic hydrogen evolution system.

METHODS

First principles calculations in this study are performed using density functional theory. Generalized gradient approximation within PBEsol functional employed to address the electron-electron exchange-correlation effects. For avoiding periodic interactions between the layers, we have inserted a vacuum region of thickness 10 Å in the z-direction. For ensuring the convergence accuracy of the computed results, convergence criteria of the iteration process is set to be 0.0001 eV. Local modified Becke-Johnson, a semi local functional, is applied for calculating electronic and optical properties for more accuracy of results. As in layered 2D nanoheterostructure, a factual depiction of the van der Waals interactions cannot be provided by conventional DFT techniques. Accordingly, in order to incorporate these interactions, we had employed the dispersion correction method of Grimme's.

Optical and thermoelectric properties of new Janus ZnMN2 (M = Ge, Sn, Si and N = S, Se, Te) monolayers: a first-principles study

Thermoelectric materials have received great interest because they directly tap into the vast reserves of currently underused thermal energy, in an environmentally friendly manner. In this work, we investigated the electronic, optical and thermoelectric properties of novel ZnMN2 (M = Ge, Sn, Si and N = S, Se, Te) monolayers by performing density functional theory calculations. The dynamic and thermal stabilities of ZnMN2 (M = Ge, Sn, Si and N = S, Se, Te) monolayers were confirmed by their phonon band structures and ab initio molecular dynamics (AIMD) simulations, which showed that all the studied monolayers are stable. Calculated electronic band structures showed that ZnSiTe2, ZnGeSe2, and ZnSnTe2 have a direct band gap, while the remaining monolayers have an indirect band gap. Optical properties in terms of the imaginary part of the dielectric function have also been investigated, which showed that all the first excitonic peaks lie in the visible region. Transport coefficients, such as the Seebeck coefficient (S), electrical conductivity (σ) and power factor (PF) were calculated using the Boltzmann theory and plotted against chemical potential. The results demonstrated that the peak values of the p-type region for the PF are greater than those of the n-type region. Notably, ZnSiTe2 exhibits a large PF due to its smaller Seebeck coefficient and higher electrical conductivity compared to ZnSnS2, indicating that it is a promising candidate for thermoelectric applications. Our findings reveal that ZnMN2 (M = Ge, Sn, Si and N = S, Se, Te) monolayers open up new possibilities for optoelectronics and thermoelectric device applications.