Back to the future of organolanthanide chemistry

Tetraphenylpentalenide organolanthanide complexes

The D2h symmetrical 1,3,4,6-tetraphenylpentalenide is an excellent ligand for the stabilisation of strongly coloured bis(pentalenide) LnIII sandwich complexes. These easily accessible compounds complement previously reported lanthanide organometallics and provide new opportunities to understand the roles of the f-orbitals in electronic structure and bonding.

4f-Orbital mixing increases the magnetic susceptibility of Cp'3Eu

Traditional models of lanthanide electronic structure suggest that bonding is predominantly ionic, and that covalent orbital mixing is not an important factor in determining magnetic properties. Here, 4f orbital mixing and its impact on the magnetic susceptibility of Cp'3Eu (Cp' = C5H4SiMe3) was analyzed experimentally using magnetometry and X-ray absorption spectroscopy (XAS) methods at the C K-, Eu M5,4-, and L3-edges. Pre-edge features in the experimental and TDDFT-calculated C K-edge XAS spectra provided unequivocal evidence of C 2p and Eu 4f orbital mixing in the π-antibonding orbital of a' symmetry. The charge-transfer configurations resulting from 4f orbital mixing were identified spectroscopically by using Eu M5,4-edge and L3-edge XAS. Modeling of variable-temperature magnetic susceptibility data showed excellent agreement with the XAS results and indicated that increased magnetic susceptibility of Cp'3Eu is due to removal of the degeneracy of the 7F1 excited state due to mixing between the ligand and Eu 4f orbitals.

(η8-Cyclooctatetraene)(η5-fluorenyl)titanium: a processable molecular spin qubit with optimized control of the molecule-substrate interface

Depositing single paramagnetic molecules on surfaces for sensing and quantum computing applications requires subtle topological control. To overcome issues that are often encountered with sandwich metal complexes, we exploit here the low symmetry architecture and suitable vaporability of mixed-sandwich [FluTi(cot)], Flu = fluorenyl, cot = cyclooctatetraene, to drive submonolayer coverage and select an adsorption configuration that preserves the spin of molecules deposited on Au(111). Electron paramagnetic resonance spectroscopy and ab initio quantum computation evidence a d z 2 ground state that protects the spin from phonon-induced relaxation. Additionally, computed and measured spin coherence times exceed 10 μs despite the molecules being rich in hydrogen. A thorough submonolayer investigation by scanning tunneling microscopy, X-ray photoelectron and absorption spectrocopies and X-ray magnetic circular dichroism measurements supported by DFT calculations reveals that the most stable configuration, with the fluorenyl in contact with the metal surface, prevents titanium(iii) oxidation and spin delocalization to the surface. This is a necessary condition for single molecular spin qubit addressing on surfaces.

Siloxide tripodal ligands as a scaffold for stabilizing lanthanides in the +4 oxidation state

Synthetic strategies to isolate molecular complexes of lanthanides, other than cerium, in the +4 oxidation state remain elusive, with only four complexes of Tb(iv) isolated so far. Herein, we present a new approach for the stabilization of Tb(iv) using a siloxide tripodal trianionic ligand, which allows the control of unwanted ligand rearrangements, while tuning the Ln(iii)/Ln(iv) redox-couple. The Ln(iii) complexes, [LnIII((OSiPh2Ar)3-arene)(THF)3] (1-LnPh) and [K(toluene){LnIII((OSiPh2Ar)3-arene)(OSiPh3)}] (2-LnPh) (Ln = Ce, Tb, Pr), of the (HOSiPh2Ar)3-arene ligand were prepared. The redox properties of these complexes were compared to those of the Ln(iii) analogue complexes, [LnIII((OSi(OtBu)2Ar)3-arene)(THF)] (1-LnOtBu) and [K(THF)6][LnIII((OSi(OtBu)2Ar)3-arene)(OSiPh3)] (2-LnOtBu) (Ln = Ce, Tb), of the less electron-donating siloxide trianionic ligand, (HOSi(OtBu)2Ar)3-arene. The cyclic voltammetry studies showed a cathodic shift in the oxidation potential for the cerium and terbium complexes of the more electron-donating phenyl substituted scaffold (1-LnPh) compared to those of the tert-butoxy (1-LnOtBu) ligand. Furthermore, the addition of the -OSiPh3 ligand further shifts the potential cathodically, making the Ln(iv) ion even more accessible. Notably, the Ce(iv) complexes, [CeIV((OSi(OtBu)2Ar)3-arene)(OSiPh3)] (3-CeOtBu) and [CeIV((OSiPh2Ar)3-arene)(OSiPh3)(THF)2] (3-CePh), were prepared by chemical oxidation of the Ce(iii) analogues. Chemical oxidation of the Tb(iii) and Pr(iii) complexes (2-LnPh) was also possible, in which the Tb(iv) complex, [TbIV((OSiPh2Ar)3-arene)(OSiPh3)(MeCN)2] (3-TbPh), was isolated and crystallographically characterized, yielding the first example of a Tb(iv) supported by a polydentate ligand. The versatility and robustness of these siloxide arene-anchored platforms will allow further development in the isolation of more oxidizing Ln(iv) ions, widening the breadth of high-valent Ln chemistry.

Photoinduced cerium-catalyzed C-H acylation of unactivated alkanes

Ketones are ubiquitous motifs in the realm of pharmaceuticals and natural products. Traditional approaches to accessing these species involve the addition of metal reagents to carboxyl compounds under harsh conditions. Herein, we report a cerium-catalyzed acylation of unactivated C(sp3)-H bonds using bench-stable acyl azolium reagents under mild and operationally-friendly conditions. This reaction exhibits excellent generality, accommodating a wide range of feedstock chemicals such as cycloalkanes and acyclic compounds as well as facilitating the late-stage functionalization of pharmaceuticals. We demonstrate further applications of our strategy with a three-component radical relay reaction and an enantioselective N-heterocyclic carbene (NHC) and cerium dual-catalyzed reaction.

Organolanthanide Complexes Containing Ln-CH3 σ-bonds: Unexpectedly Similar Hydrolysis Rates for Trivalent and Tetravalent Organocerium

We report the gas-phase preparation, isolation, and reactivity of a series of organolanthanides featuring the Ln-CH3 bond. The complexes are formed by decarboxylating anionic lanthanide acetates to form trivalent [LnIII(CH3)(CH3CO2)3]- (Ln = La, Ce, Pr, Nd, Sm, Tb, Tm, Yb, Lu), divalent [EuII(CH3)(CH3CO2)2]-, and the first examples of tetravalent organocerium complexes featuring CeIV-Calkyl σ-bonds: [CeIV(O)(CH3)(CH3CO2)2]- and [CeIV(O)(CH3)(NO3)2]-. Attempts to isolate PrIV-CH3 and TbIV-CH3 were unsuccessful; however, fragmentation patterns reveal that the oxidation of LnIII to a LnIV-oxo-acetate complex is more favorable for Ln = Pr than for Ln = Tb. The rate of Ln-CH3 hydrolysis is a measure of bond stability, and it decreases from LaIII-CH3 to LuIII-CH3, with increasing steric crowding for smaller Ln stabilizing the harder Ln-CH3 bond against hydrolysis. [EuII(CH3)(CH3CO2)2]- engages in a much faster hydrolysis versus LnIII-CH3. The surprising observation of similar hydrolysis rates for CeIV-CH3 and CeIII-CH3 is discussed with respect to sterics, the oxo ligand, and bond covalency in σ-bonded organolanthanides.

Samarium- and Ytterbium-Grafted Periodic Mesoporous Silica for Carbon Dioxide Capture and Conversion

Immobilized coordination compounds of Lewis acidic metals are powerful catalytic components of systems for the cycloaddition of CO2 to epoxides that do not require sophisticated coordination frameworks to harness the metal center and modulate its activity. Surface organometallic chemistry (SOMC) is a valuable methodology to prepare well-defined and site-isolated surface complexes and coordination compounds on metal oxides, with ligand environments easily adjustable to a targeted catalytic reaction. In this work, the SOMC methodology is applied to prepare SmII, YbII, and SmIII alkoxide surface complexes on periodic mesoporous (organo)silica of distinct pore symmetry/size for application in the CO2 cycloaddition reaction. The surface complexes are readily accessible by the grafting of the bis(trimethylsilyl)amide precursors LnII[N(SiMe3)2]2(THF)2 (Ln = Sm, Yb) and SmIII[N(SiMe3)2]3, followed by ligand exchange with alcohols (ethanol and neopentanol). The use of periodic mesoporous supports led to hybrid materials with relatively high surface areas and pore sizes, affording good performance in CO2 capture and in the cycloaddition of CO2 to epoxides under mild conditions (60-80 °C, 1-10 bar). In terms of catalytic performance, recyclability, and low amount of added nucleophile TBAX (X = Br, I), the most active materials prepared in this work compare well to a variety of previously reported SOMC-derived surface complexes and to other heterogeneous Lewis acids displaying more elaborate ligand environments.