MnFe2O4@SiO2@CeO2 core–shell nanostructures for applications in water remediation†

"Core/Shell" Nanocomposites as Photocatalysts for the Degradation of the Water Pollutants Malachite Green and Rhodamine B

"Core/shell" composites are based on a ferrite core coated by two layers with different properties, one of them is an isolator, SiO2, and the other is a semiconductor, TiO2. These composites are attracting interest because of their structure, photocatalytic activity, and magnetic properties. Nanocomposites of the "core/shell" МFe2O4/SiO2/TiO2 (М = Zn(II), Co(II)) type are synthesized with a core of MFe2O4 produced by two different methods, namely the sol-gel method (SG) using propylene oxide as a gelling agent and the hydrothermal method (HT). SiO2 and TiO2 layer coating is performed by means of tetraethylorthosilicate, TEOS, Ti(IV) tetrabutoxide, and Ti(OBu)4, respectively. A combination of different experimental techniques is required to prove the structure and phase composition, such as XRD, UV-Vis, TEM with EDS, photoluminescence, and XPS. By Rietveld analysis of the XRD data unit cell parameters, the crystallite size and weight fraction of the polymorphs anatase and rutile of the shell TiO2 and of the ferrite core are determined. The magnetic properties of the samples, and their activity for the photodegradation of the synthetic industrial dyes Malachite Green and Rhodamine B are measured in model water solutions under UV light irradiation and simulated solar irradiation. The influence of the water matrix on the photocatalytic activity is determined using artificial seawater in addition to ultrapure water. The rate constants of the photocatalytic process are obtained along with the reaction mechanism, established using radical scavengers where the role of the radicals is elucidated.

Boron Nitride Nanosheet-Magnetic Nanoparticle Composites for Water Remediation Applications

The combination of 0D nanoparticles with 2D nanomaterials has attracted a lot of attention over the last years due to the unique multimodal properties of resulting 0D-2D nanocomposites. In this work, we developed boron nitride nanosheets (BNNS) functionalized with manganese ferrite magnetic nanoparticles (MNPs). The functionalization process involved attachment of MNPs to exfoliated BNNS by refluxing the precursor materials in a polyol medium. Characterization of the produced BNNS-MNP composites was carried out using powder X-ray diffraction, transmission electron microscopy, vibrating sample magnetometry, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The adhesion of MnFe2O4 magnetic nanoparticles onto the BNNS remained unaffected by repeated sonication and heating in a furnace at 400 °C, underscoring the robust nature of the formed bond. FTIR spectra and XPS deconvolution confirmed the presence of strong bonding between BNNS and the MNPs. Membranes were fabricated from the BNNS and the BNNS-MnFe2O4 nanocomposites for evaluating their efficiency in removing the methylene blue dye pollutant. The membranes have been characterized by scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, and mercury intrusion porosimetry. The effectiveness of dye removal was monitored using ultraviolet-visible spectroscopy. The BNNS-MnFe2O4 nanocomposite membranes exhibited enhanced MB capture compared to membranes made from pure BNNS alone. The recyclability assessment of BNNS-MnFe2O4 demonstrated exceptional performance, retaining 92% efficiency even after eight cycles. These results clearly demonstrate the high potential of these magnetic nanocomposites as reusable materials for water filtration membranes. Furthermore, the introduction of magnetic functionality as part of the membrane brings an exciting opportunity for in situ magnetic heating of the membrane, which shall be explored in future work.

Boron Nitride Nanosheets Functionalized with Fe3O4 and CoFe2O4 Magnetic Nanoparticles for Nanofiltration Applications

Nanofiltration (NF) is one of the emerging technologies that is very promising for water purification among many other applications. 2D boron nitride (BN) based nanomaterials are excellent building blocks for NF membranes. In our work, BN nanosheets (BNNS) have been functionalized with magnetic nanoparticles (MNPs) to form BNNS-MNP nanocomposites. It was found that the nanocomposites are stable with the MNPs giving very good coverage with both magnetite and cobalt ferrite MNPs and showing good attachment and stability to sonication. These nanocomposites have been tested for removal of methylene blue (MB) dye and MNPs from water. BNNS-magnetite nanocomposites showed higher removal efficiency of the MB from water than the corresponding pure BNNS, while the BNNS-cobalt ferrite removal efficiency was slightly less than the pure BNNS. The BNNS-cobalt ferrite material was regenerated by burning off the MB and recycled to show the recyclability of this material. The BNNS membranes were tested for filtration of 14 ± 4 nm magnetite MNPs and were found to capture 100% of the nanoparticles with no MNPs left in the filtrate. Thus, we have developed magnetic nanocomposite membranes, which have demonstrated great potential for water remediation. We believe that this research opens up promising ways for production of 2D nanocomposite materials with multiple applications.