Accuracy improvement via novel ratiometry design in distance-based microfluidic paper based analytical device: instrument-free point of care testing

Nanolevel of detection of ascorbic acid using horse-radish peroxidase inhibition assay

Ascorbic acid plays a significant role in regulation of various bodily functions with high concentrations in immune cells and being involved in connective tissue maintenance. Commonly it is detected through various colorimetric methods. In this study, we propose a one-step simple method based on the inhibitory activity of ascorbic acid on horseradish peroxidase and hydrogen peroxide. The detection is observed by colorimetric changes to TMB (3,3',5,5' tetramethylbenzidine). The enzyme inhibition unit was optimized with a high level of linearity (r2 = 0.9999) and the level of detection and level of quantification were found to be 1.35 nM and 4.08 nM, respectively with higher sensitive compared to the HPLC method (11 μM). Both intra and inter-assays showed high correlations at different AA concentrations. (r2 > 0.9999). Similar results were also observed for vitamin C tablets, ascorbate salts, fruits, and market products (r2 = 0.999). There was negligible effect of interference by citric acid, lactic acid, tartaric acids, and glucose with high recoveries (>98%) at 1 mg/mL to 0.0078 mg/mL concentration ranges. The recovery error (RE%) was found to be less than 10%. Our detection method is distinguished by its simplicity, nano-level of detection, reproducibility, and potential application and adaptability as a point-of-use test.

Distance-based paper analytical device for multiplexed quantification of cytokine biomarkers using carbon dots integrated with molecularly imprinted polymer

This article introduces distance-based paper analytical devices (dPADs) integrated with molecularly imprinted polymers (MIPs) and carbon dots (CDs) for simultaneous quantification of cytokine biomarkers, namely C-reactive protein (CRP), tumor necrosis factor-alpha (TNF-α), and interleukin-6 (IL-6) in human biological samples for diagnosis of cytokine syndrome. Using fluorescent CDs and MIP technology, the dPAD exhibits high selectivity and sensitivity. Detection is based on fluorescence quenching of CDs achieved through the interaction of the target analytes with the MIP layer on the paper substrate. Quantitative analysis is easily accomplished by measuring the distance length of quenched fluorescence with a traditional ruler and naked eye readout enabling rapid diagnosis of cytokine syndrome and the underlying infection. Our sensor demonstrated linear ranges of 2.50-24.0 pg mL-1 (R2 = 0.9974), 0.25-3.20 pg mL-1 (R2 = 0.9985), and 1.50-16.0 pg mL-1 (R2 = 0.9966) with detection limits (LODs) of 2.50, 0.25, and 1.50 pg mL-1 for CRP, TNF-α, and IL-6, respectively. This sensor also demonstrated remarkable selectivity compared to a sensor employing a non-imprinted polymer (NIP), and precision with the highest relative standard deviation (RSD) of 5.14%. The sensor is more accessible compared to prior methods relying on expensive reagents and instruments and complex fabrication methods. Furthermore, the assay provided notable accuracy for monitoring these biomarkers in various human samples with recovery percentages ranging between 99.22% and 103.58%. By integrating microfluidic systems, nanosensing, and MIPs technology, our developed dPADs hold significant potential as a cost-effective and user-friendly analytical method for point-of-care diagnostics (POC) of cytokine-related disorders. This concept can be further extended to developing diagnostic devices for other biomarkers.

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

The regular and on-site monitoring of ions in drinking water is essential for safeguarding public health, ensuring high water quality, and preserving the ecological balance of aquatic ecosystems. Thus, developing a portable analytical device for the rapid, cost-effective, and visual on-site detection of multiple environmental pollutants is notably significant. In the present work, a novel ratiometric microfluidic paper-based analytical device (μPAD) was designed and developed for the simultaneous detection of Fe3+ and Cu2+ ions in water samples taking advantages from built-in masking zone. The μPAD was functionalized with a greenish-yellow fluorescent Zn-based metal-organic framework@tetracycline (FMOF-5@TC) nanocomposite, and the ratiometric design was based on the change in emission color from greenish yellow (FMOF-5@TC) to blue (FMOF-5). The μPAD consisted of one sample zone linked to two detection zones via two channels: the first channel was for the detection of both ions, while the second was intended for detecting only Cu2+ ions and comprised a built-in masking zone to remove Fe3+ ions prior to reaching the detection zone. The corresponding color changes were recorded with the aid of a smartphone and RGB calculations. The linear ranges were 0.1-80 μM for Cu2+ and 0.2-160 μM for Fe3+, with limits of detection of 0.027 and 0.019 μM, respectively. The simple μPAD design enabled the simultaneous detection of Cu2+ and Fe3+ ions in drinking water samples with excellent accuracy and precision, with spike recoveries of 81.28-96.36% and 83.01-102.33% for Cu2+ and Fe3+, respectively.

Dual-spot ratiometric microfluidic paper-based analytical device for accuracy and precision improvement

Instrumental and environmental fluctuations are common sources of error in smartphone-based optical detection, significantly affecting the accuracy of analytical measurements. In this regard, spotting the sample and reference simultaneously and in close proximity compensates for the fluctuations. This "dual-spot" design is similar to the double-beam technique used in spectrophotometry, which reduces fluctuations in the results. The underlying hypothesis is that any instrumental and/or environmental factors influencing the color intensity in the detection zones will similarly impact the color intensity in the control zone under the same conditions. To test our design, a ratiometric microfluidic paper-based analytical device (μPAD), functionalized with a mixture of green-emissive carbon dots (CDs) and red-emissive ethidium bromide, was developed for the selective detection of ascorbic acid (AA). The green emission of the CDs is quenched by both AA and Fe3+; NaF was thus loaded onto the 3D connector as a masking agent to remove the interference effect of the Fe3+ ions. The color variations were monitored under a UV lamp, using a smartphone to capture the images, and the RGB intensities were processed using the Color Grab application. The proposed double-spot method greatly enhanced the analytical precision and accuracy of the device. A linear working range from 0 to 125 μM was obtained, and the limit of detection was 2.71 μM. The μPAD was successfully used for the detection of AA in human serum, with recoveries from 87.27 to 98.52 %.

Recent Developments in Paper-Based Sensors with Instrument-Free Signal Readout Technologies (2020-2023)

Signal readout technologies that do not require any instrument are essential for improving the convenience and availability of paper-based sensors. Thanks to the remarkable progress in material science and nanotechnology, paper-based sensors with instrument-free signal readout have been developed for multiple purposes, such as biomedical detection, environmental pollutant tracking, and food analysis. In this review, the developments in instrument-free signal readout technologies for paper-based sensors from 2020 to 2023 are summarized. The instrument-free signal readout technologies, such as distance-based signal readout technology, counting-based signal readout technology, text-based signal readout technology, as well as other transduction technologies, are briefly introduced, respectively. On the other hand, the applications of paper-based sensors with instrument-free signal readout technologies are summarized, including biomedical analysis, environmental analysis, food analysis, and other applications. Finally, the potential and difficulties associated with the advancement of paper-based sensors without instruments are discussed.

A pre-oxidized Eu-probe doped into bio-MOF-1 for ascorbic acid emission "off-on" detection in human serum

Ascorbic acid (or widely known as vitamin C, VC) is an essential antioxidant and a free radical scavenger in human body. The appeal for reliable fluorescent nanosensors always promotes the development of VC probe. In this work, a pre-oxidized Eu-probe (denoted as Eu-NO9) was synthesized. Without VC, Eu-NO9 was nearly non-emissive owing to the inefficient ligand energy transfer (ET) to Eu ion (caused by mismatched ligand level and long distance to Eu, as revealed by single crystal analysis and emissive parameters). By adding VC, the pre-oxidized ligand was deoxidized and its ET to Eu ion became efficient (confirmed by electrochemical analysis), with Eu(III) red emission intensity obviously increased. Then Eu-NO9 was doped into a porous host bio-MOF-1 for ascorbic acid detection (denoted as Eu-NO9@MOF). The molecular sieving effect of bio-MOF-1 improved sensing selectivity, and bio-MOF-1 blue emission (421 nm) was applied as a reference for Eu(III) red emission. Linear working curves were obtained within a wide working region of 0-100 μM, with LOD of 1.7 μM. A short response time of 192 s at 25 °C was confirmed. Practical sensing plates were prepared and found applicable for VC detection in fresh human serum. The advantage of this work was the combination of a pre-oxidized probe and a porous host which gave emission "turn on" fluorescence sensing for VC with good selectivity, linear calibration curve and wide working region.