Conformational changes and the role of metals in the mechanism of type II dehydroquinase from Aspergillus nidulans

Structural and functional characterisation of a cold-active yet heat-tolerant dehydroquinase from Glaciozyma antarctica PI12

Dehydroquinase or 3-dehydroquinate dehydratase (DHQD) reversibly cleaves 3-dehydroquinate to form 3-dehydroshikimate. Here, we describe the functional and structural features of a cold active type II 3-dehydroquinate dehydratase from the psychrophilic yeast, Glaciozyma antarctica PI12 (GaDHQD). Functional studies showed that the enzyme was active at low temperatures (10-30 °C), but displayed maximal activity at 40 °C. Yet the enzyme was stable over a wide range of temperatures (10-70 °C) and between pH 6.0-10.0 with an optimum pH of 8.0. Interestingly, the enzyme was highly thermo-tolerant, denaturing only at approximately 84 °C. Three-dimensional structure analyses showed that the G. antarctica dehydroquinase (GaDHQD) possesses psychrophilic features in comparison with its mesophilic and thermophilic counterparts such as higher numbers of non-polar residues on the surface, lower numbers of arginine and higher numbers of glycine-residues with lower numbers of hydrophobic interactions. On the other hand, GaDHQD shares some traits (i.e. total number of hydrogen bonds, number of proline residues and overall folding) with its mesophilic and thermophilic counterparts. Combined, these features contribute synergistically towards the enzyme's ability to function at both low and high temperatures.

Unraveling the kinetic diversity of microbial 3-dehydroquinate dehydratases of shikimate pathway

3-Dehydroquinate dehydratase (DHQase) catalyzes the conversion of 3-dehydroquinic acid to 3-dehydroshikimic acid of the shikimate pathway. In this study, 3180 prokaryotic genomes were examined and 459 DHQase sequences were retrieved. Based on sequence analysis and their original hosts, 38 DHQase genes were selected for chemical synthesis. The selected DHQases were translated into new DNA sequences according to the genetic codon usage bias by both Escherichia coli and Corynebacterium glutamicum. The new DNA sequences were customized for synthetic biological applications by adding Biobrick adapters at both ends and by removal of any related restriction endonuclease sites. The customized DHQase genes were successfully expressed in E. coli, and functional DHQases were obtained. Kinetic parameters of Km, kcat, and Vmax of DHQases were determined with a newly established high-throughput method for DHQase activity assay. Results showed that DHQases possessed broad strength of substrate affinities and catalytic capacities. In addition to the DHQase kinetic diversities, this study generated a DHQase library with known catalytic constants that could be applied to design artificial modules of shikimate pathway for metabolic engineering and synthetic biology.

Carboxylation mechanism and stereochemistry of crotonyl-CoA carboxylase/reductase, a carboxylating enoyl-thioester reductase

Chemo- and stereoselective reductions are important reactions in chemistry and biology, and reductases from biological sources are increasingly applied in organic synthesis. In contrast, carboxylases are used only sporadically. We recently described crotonyl-CoA carboxylase/reductase, which catalyzes the reduction of (E)-crotonyl-CoA to butyryl-CoA but also the reductive carboxylation of (E)-crotonyl-CoA to ethylmalonyl-CoA. In this study, the complete stereochemical course of both reactions was investigated in detail. The pro-(4R) hydrogen of NADPH is transferred in both reactions to the re face of the C3 position of crotonyl-CoA. In the course of the carboxylation reaction, carbon dioxide is incorporated in anti fashion at the C2 atom of crotonyl-CoA. For the reduction reaction that yields butyryl-CoA, a solvent proton is added in anti fashion instead of the CO(2). Amino acid sequence analysis showed that crotonyl-CoA carboxylase/reductase is a member of the medium-chain dehydrogenase/reductase superfamily and shares the same phylogenetic origin. The stereospecificity of the hydride transfer from NAD(P)H within this superfamily is highly conserved, although the substrates and reduction reactions catalyzed by its individual representatives differ quite considerably. Our findings led to a reassessment of the stereospecificity of enoyl(-thioester) reductases and related enzymes with respect to their amino acid sequence, revealing a general pattern of stereospecificity that allows the prediction of the stereochemistry of the hydride transfer for enoyl reductases of unknown specificity. Further considerations on the reaction mechanism indicated that crotonyl-CoA carboxylase/reductase may have evolved from enoyl-CoA reductases. This may be useful for protein engineering of enoyl reductases and their application in biocatalysis.

Role of context in the relationship between form and function: structural plasticity of some PROSITE patterns

True positive hits of PROSITE sequence pattern are expected to have a characteristic three-dimensional structure. The combined sequence-structure attributes of PROSITE patterns can be used for function prediction of an uncharacterized protein with known primary and 3D structure, a situation that might arise in structural genomics projects. We have found specific examples of true hits of PROSITE patterns displaying structural plasticity by assuming significantly different local conformation, depending upon the context. Our work highlights the importance of taking into account all the known distinct conformations of PROSITE patterns, while creating a sensitive 3D template for the pattern, for use in functional annotation.

The structure and mechanism of the type II dehydroquinase from Streptomyces coelicolor

The structure of the type II DHQase from Streptomyces coelicolor has been solved and refined to high resolution in complexes with a number of ligands, including dehydroshikimate and a rationally designed transition state analogue, 2,3-anhydro-quinic acid. These structures define the active site of the enzyme and the role of key amino acid residues and provide snap shots of the catalytic cycle. The resolution of the flexible lid domain (residues 21-31) shows that the invariant residues Arg23 and Tyr28 close over the active site cleft. The tyrosine acts as the base in the initial proton abstraction, and evidence is provided that the reaction proceeds via an enol intermediate. The active site of the structure of DHQase in complex with the transition state analog also includes molecules of tartrate and glycerol, which provide a basis for further inhibitor design.

Mutational analysis of RsrA, a zinc-binding anti-sigma factor with a thiol-disulphide redox switch

In the Gram-positive bacterium, Streptomyces coelicolor A3(2), expression of the thioredoxin system is modulated by a sigma factor called sigmaR in response to changes in the cytoplasmic thiol-disulphide status, and the activity of sigmaR is controlled post-translationally by an anti-sigma factor, RsrA. In vitro, the anti-sigma factor activity of RsrA, which contains seven cysteines, correlates with its thiol-disulphide redox status. Here, we investigate the function of RsrA in vivo. A constructed rsrA null mutant had very high constitutive levels of disulphide reductase activity and sigmaR-dependent transcription, confirming that RsrA is a negative regulator of sigmaR and a key sensor of thiol-disulphide status. Targeted mutagenesis revealed that three of the seven cysteines in RsrA (C11, C41 and C44) were essential for anti-sigma factor activity and that a mutant RsrA protein containing only these three cysteines was active and still redox sensitive in vivo. We also show that RsrA is a metalloprotein, containing near-stoichiometric amounts of zinc. On the basis of these data, we propose that a thiol-disulphide redox switch is formed between two of C11, C41 and C44, and that all three residues play an essential role in anti-sigma factor activity in their reduced state, perhaps by acting as ligands for zinc. Unexpectedly, rsrA null mutants were blocked in sporulation, probably as a consequence of an increase in the level of free sigmaR.

Aromatic L-amino acid decarboxylase: conformational change in the flexible region around Arg334 is required during the transaldimination process

Aromatic L-amino acid decarboxylase (AADC) catalytic mechanism has been proposed to proceed through two consecutive intermediates (i.e., Michaelis complex and the external aldimine). Limited proteolysis of AADC that preferentially digested at the C-terminal side of Arg334 was slightly retarded in the presence of dihydroxyphenyl acetate that formed a stable Michaelis complex. On the contrary, AADC was scarcely digested in the presence of L-dopa methyl ester that formed a stable external aldimine. Similar protection by the substrate analogs was observed in the chemical modification experiment. From these results, we concluded that the region around Arg334 must be exposed and flexible in the unliganded state, and forming the Michaelis complex generated a subtle conformational change, then underwent marked conformational change during the subsequent transaldimination process prerequisite to forming the external aldimine. For further analyses, we constructed a mutant gene encoding in tandem the two peptides of AADC cleaved at the Asn327-Met328 bond inside the putative flexible region. The gene product, fragmentary AADC, was still active with L-dopa as substrate, but its k(cat) value was decreased 57-fold, and the Km value was increased 9-fold compared with those of the wild-type AADC. The absorption spectra of the fragmentary AADC in the presence of L-dopa methyl ester showed shift in the equilibrium of the transaldimination from the external aldimine to the Michaelis complex. Tryptic digestion of the fragmentary AADC removed seven amino acid residues, Met328-Arg334, and resulted in complete inactivation. Susceptibility of the fragmentary enzyme to trypsin was not changed by L-dopa methyl ester revealing the loss of appropriate conformational change in the flexible region induced by substrate binding. From these results we propose that the conformational change in the flexible region is required during the transaldimination process.

Cloning, expression, and characterization of a type II 3-dehydroquinate dehydratase gene from Streptomyces hygroscopicus

A gene encoding dehydroquinate dehydratase (DHQase) was cloned from Streptomyces hygroscopicus var. ascomyceticus. The 528-bp open reading frame specified a primary translation product of 175 amino acids with a calculated Mr of 18,789. The predicted amino acid sequence of the DHQase showed similarities to bacterial and fungal type II DHQases. Overexpression of the dhq gene was accomplished in Escherichia coli using a gene fusion technique in which a malE, the gene encoding the maltose binding protein (MBP), was fused via a short oligonucleotide region to the beginning of dhq. The recombinant MBP-DHQase fusion protein was purified by affinity chromatography and cleaved using thrombin. The resulting DHQase, separated from the MBP, demonstrated typical properties of a type II DHQase: a relatively high Km for the dehydroquinate substrate (650 microM) and extreme thermal stability. The subunit Mr estimated by SDS-PAGE was 19,000, and the native Mr estimated by gel-exclusion chromatography and sucrose-density centrifugation was 130,000, suggesting that the enzyme is a homoheptamer (type II DHQases are typically homododecamers). The MBP-DHQase complex also adopted a heptameric structure and was a thermostable, fully active DHQase, indicating that the N-terminus is not involved in formation of protomer-protomer complexes. Previous analyses have supported positioning the N-terminus of type II DHQases close to the active site and a conformational change in this region coincident with ligand binding. Nonetheless, the Km and relative kcat obtained for MBP-DHQase were indistinguishable from those observed for DHQase. Inactivation data of the DHQase from S. hygroscopicus with the arginine-specific reagent phenylglyoxal showed that a modified Arg residue(s) is likely close to the N-terminus and active site of DHQase, but does not play an essential role in catalysis.

Cloning, sequencing, expression, purification and preliminary characterization of a type II dehydroquinase from Helicobacter pylori

A heat-stable dehydroquinase was purified to near homogeneity from a plate-grown suspension of the Gram-negative stomach pathogen Helicobacter pylori, and shown from both its subunit and native molecular masses to be a member of the type II family of dehydroquinases. This was confirmed by N-terminal amino acid sequence data. The gene encoding this activity was isolated following initial identification, by random sequencing of the H. pylori genome, of a 96 bp fragment, the translated sequence of which showed strong identity to a C-terminal region of other type II enzymes. Southern blot analysis of a cosmid library identified several potential clones, one of which complemented an Escherichia coli aroD point mutant strain deficient in host dehydroquinase. The gene encoding the H. pylori type II dehydroquinase (designated aroQ) was sequenced. The translated sequence was identical to the N-terminal sequence obtained directly from the purified protein, and showed strong identity to other members of the type II family of dehydroquinases. The enzyme was readily expressed in E. coli from a plasmid construct from which several milligrams of protein could be isolated, and the molecular mass of the protein was confirmed by electrospray MS. The aroQ gene in H. pylori may function in the central biosynthetic shikimate pathway of this bacterium, thus opening the way for the construction of attenuated strains as potential vaccines as well as offering a new target for selective enzyme inhibition.