Evaluation of ChemChrome V6 for bacterial viability assessment in waters

Effect of 10 UV Filters on the Brine Shrimp Artemia salina and the Marine Microalga Tetraselmis sp

The presence of pharmaceutical and personal care product (PPCP) residues in the aquatic environment is an emerging issue due to their uncontrolled release through gray water, and accumulation in the environment that may affect living organisms, ecosystems and public health. The aim of this study is to assess the toxicity of benzophenone-3 (BP-3), bis-ethylhexyloxyphenol methoxyphenyl triazine (BEMT), butyl methoxydibenzoylmethane (BM), methylene bis-benzotriazolyl tetramethylbutylphenol (MBBT), 2-ethylhexyl salicylate (ES), diethylaminohydroxybenzoyl hexyl benzoate (DHHB), diethylhexyl butamido triazone (DBT), ethylhexyl triazone (ET), homosalate (HS) and octocrylene (OC) on marine organisms from two major trophic levels, including autotrophs (Tetraselmis sp.) and heterotrophs (Artemia salina). In general, results showed that both HS and OC were the most toxic UV filters for our tested species, followed by a significant effect of BM on Artemia salina due to BM—but only at high concentrations (1 mg/L). ES, BP3 and DHHB affected the metabolic activity of the microalgae at 100 µg/L. BEMT, DBT, ET, MBBT had no effect on the tested organisms, even at high concentrations (2 mg/L). OC toxicity represents a risk for those species, since concentrations used in this study are 15–90 times greater than those reported in occurrence studies for aquatic environments. For the first time in the literature, we report HS toxicity on a microalgae species at concentrations complementing those found in aquatic environments. These preliminary results could represent a risk in the future if concentrations of OC and HS continue to increase.

Determination of viable legionellae in engineered water systems: Do we find what we are looking for?

In developed countries, legionellae are one of the most important water-based bacterial pathogens caused by management failure of engineered water systems. For routine surveillance of legionellae in engineered water systems and outbreak investigations, cultivation-based standard techniques are currently applied. However, in many cases culture-negative results are obtained despite the presence of viable legionellae, and clinical cases of legionellosis cannot be traced back to their respective contaminated water source. Among the various explanations for these discrepancies, the presence of viable but non-culturable (VBNC) Legionella cells has received increased attention in recent discussions and scientific literature. Alternative culture-independent methods to detect and quantify legionellae have been proposed in order to complement or even substitute the culture method in the future. Such methods should detect VBNC Legionella cells and provide a more comprehensive picture of the presence of legionellae in engineered water systems. However, it is still unclear whether and to what extent these VBNC legionellae are hazardous to human health. Current risk assessment models to predict the risk of legionellosis from Legionella concentrations in the investigated water systems contain many uncertainties and are mainly based on culture-based enumeration. If VBNC legionellae should be considered in future standard analysis, quantitative risk assessment models including VBNC legionellae must be proven to result in better estimates of human health risk than models based on cultivation alone. This review critically evaluates current methods to determine legionellae in the VBNC state, their potential to complement the standard culture-based method in the near future, and summarizes current knowledge on the threat that VBNC legionellae may pose to human health.

Fluorescence-based tools for single-cell approaches in food microbiology

The better understanding of the functioning of microbial communities is a challenging and crucial issue in the field of food microbiology, as it constitutes a prerequisite to the optimization of positive and technological microbial population functioning, as well as for the better control of pathogen contamination of food. Heterogeneity appears now as an intrinsic and multi-origin feature of microbial populations and is a major determinant of their beneficial or detrimental functional properties. The understanding of the molecular and cellular mechanisms behind the behavior of bacteria in microbial communities requires therefore observations at the single-cell level in order to overcome "averaging" effects inherent to traditional global approaches. Recent advances in the development of fluorescence-based approaches dedicated to single-cell analysis provide the opportunity to study microbial communities with an unprecedented level of resolution and to obtain detailed insights on the cell structure, metabolism activity, multicellular behavior and bacterial interactions in complex communities. These methods are now increasingly applied in the field of food microbiology in different areas ranging from research laboratories to industry. In this perspective, we reviewed the main fluorescence-based tools used for single-cell approaches and their concrete applications with specific focus on food microbiology.

Methods for microbiological quality assessment in drinking water: a comparative study

The present study aimed to compare several methods for quantifying and discriminating between the different physiological states of a bacterial population present in drinking water. Flow cytometry (FCM), solid-phase cytometry (SPC), epifluorescence microscopy (MSP) and culture method performances were assessed by comparing the results obtained for different water samples. These samples, including chlorinated and non-chlorinated water, were collected in a drinking water treatment plant. Total bacteria were quantified by using SYBR Green II (for FCM) and 4',6'-diamino-2-phenylindole (DAPI) (for MSP), viable and non-viable bacteria were distinguished by using SYBR Green II and propidium iodide dual staining (for FCM), and active cells were distinguished by using CTC (for MSP) and Chemchrome V6 (for FCM and SPC). In our conditions, counts using microscopy and FCM were significantly correlated regarding total bacteria and active cells. Conversely, counts were not significantly similar using solid-phase and FCM for active bacteria. Moreover, the R2A medium showed that bacterial culturability could be recovered after chlorination. This study highlights that FCM appears to be a useful and powerful technique for drinking water production monitoring.

Resveratrol against Arcobacter butzleri and Arcobacter cryaerophilus: activity and effect on cellular functions

The frequent isolation of Arcobacter butzleri and Arcobacter cryaerophilus from food samples makes it imperative to search for potential compounds able to inhibit the development of these bacteria. Taking this into consideration, this study focuses on the antimicrobial activity of resveratrol and its mechanism of action against A. butzleri and A. cryaerophilus. The activity of resveratrol was assessed by a microdilution method and time-kill curves. Resveratrol effect on cellular functions was assessed by flow cytometry evaluating intracellular DNA content and metabolic activity. Ethidium bromide (EtBr) accumulation in the presence of resveratrol was also evaluated, as well as the susceptibility to resveratrol in the presence of phenylalanine-arginine β-naphthylamide (PAβN). Scanning electron microscopy (SEM) was used to further evaluate cell damage caused by resveratrol. Resveratrol presented MIC values of 100 and 50μg/mL to A. butzleri and A. cryaerophilus, respectively. Based on the time-kill curves, resveratrol exhibited bactericidal activity, leading to a ≥3log10CFU/mL reduction of initial inoculums, for A. butzleri exponential phase cells incubated for 6h with 1× MIC or with 2× MIC after 24h for stationary phase cells. For A. cryaerophilus cells in exponential growth phase, 99.9% killing was achieved after 24h incubation with 2× MIC, whereas, for stationary phase cells, bactericidal activity was only detected after incubation with 4× MIC. Incubation with resveratrol led to a decrease in both intracellular DNA content and metabolic activity. An increase in the accumulation of EtBr was observed in the presence of resveratrol, and the efflux pump inhibitor PAβN reduced the MIC of resveratrol. SEM analysis revealed disintegration of A. butzleri cells treated with resveratrol, whereas no morphological alteration was observed for A. cryaerophilus cells. Resveratrol has a good anti-Arcobacter activity, and the results obtained suggest that this compound could act through several different mechanisms in the inhibition of this microorganism. The results encourage the use of this compound for the development of potential strategies to control Arcobacter in food products.

Characterization and resuscitation of 'non-culturable' cells of Legionella pneumophila

BACKGROUND

Legionella pneumophila is a waterborne pathogen responsible for Legionnaires' disease, an infection which can lead to potentially fatal pneumonia. After disinfection, L. pneumophila has been detected, like many other bacteria, in a "viable but non culturable" state (VBNC). The physiological significance of the VBNC state is unclear and controversial: it could be an adaptive response favoring long-term survival; or the consequence of cellular deterioration which, despite maintenance of certain features of viable cells, leads to death; or an injured state leading to an artificial loss of culturability during the plating procedure. VBNC cells have been found to be resuscitated by contact with amoebae.

RESULTS

We used quantitative microscopic analysis, to investigate this "resuscitation" phenomenon in L. pneumophila in a model involving amending solid plating media with ROS scavengers (pyruvate or glutamate), and co-culture with amoebae. Our results suggest that the restoration observed in the presence of pyruvate and glutamate may be mostly due to the capacity of these molecules to help the injured cells to recover after a stress. We report evidence that this extracellular signal leads to a transition from a not-culturable form to a culturable form of L. pneumophila, providing a technique for recovering virulent and previously uncultivated forms of L. pneumophila.

CONCLUSION

These new media could be used to reduce the risk of underestimation of counts of virulent of L. pneumophila cells in environmental samples.

Microbial biofilms on needleless connectors for central venous catheters: comparison of standard and silver-coated devices collected from patients in an acute care hospital

Microorganisms may colonize needleless connectors (NCs) on intravascular catheters, forming biofilms and predisposing patients to catheter-associated infection (CAI). Standard and silver-coated NCs were collected from catheterized intensive care unit patients to characterize biofilm formation using culture-dependent and culture-independent methods and to investigate the associations between NC usage and biofilm characteristics. Viable microorganisms were detected by plate counts from 46% of standard NCs and 59% of silver-coated NCs (P=0.11). There were no significant associations (P>0.05, chi-square test) between catheter type, side of catheter placement, number of catheter lumens, site of catheter placement, or NC placement duration and positive NC findings. There was an association (P=0.04, chi-square test) between infusion type and positive findings for standard NCs. Viable microorganisms exhibiting intracellular esterase activity were detected on >90% of both NC types (P=0.751), suggesting that a large percentage of organisms were not culturable using the conditions provided in this study. Amplification of the 16S rRNA gene from selected NCs provided a substantially larger number of operational taxonomic units per NC than did plate counts (26 to 43 versus 1 to 4 operational taxonomic units/NC, respectively), suggesting that culture-dependent methods may substantially underestimate microbial diversity on NCs. NC bacterial communities were clustered by patient and venous access type and may reflect the composition of the patient's local microbiome but also may contain organisms from the health care environment. NCs provide a portal of entry for a wide diversity of opportunistic pathogens to colonize the catheter lumen, forming a biofilm and increasing the potential for CAI, highlighting the importance of catheter maintenance practices to reduce microbial contamination.

VBNC Legionella pneumophila cells are still able to produce virulence proteins

Legionella pneumophila is the agent responsible for legionellosis. Numerous bacteria, including L. pneumophila, can enter into a viable but not culturable (VBNC) state under unfavorable environmental conditions. In this state, cells are unable to form colonies on standard medium but are still alive. Here we show that VBNC L. pneumophila cells, obtained by monochloramine treatment, were still able to synthesize proteins, some of which are involved in virulence. Protein synthesis was measured using (35)S-labeling and the proteomes of VBNC and culturable cells then compared. This analysis allowed the identification of nine proteins that were accumulated in the VBNC state. Among them, four were involved in virulence, i.e., the macrophage infectivity potentiator protein, the hypothetical protein lpl2247, the ClpP protease proteolytic subunit and the 27 kDa outer membrane protein. Others, i.e., the enoyl reductase, the electron transfer flavoprotein (alpha and beta subunits), the 50S ribosomal proteins (L1 and L25) are involved in metabolic and energy production pathways. However, resuscitation experiments performed with Acanthamoeba castellanii failed, suggesting that the accumulation of virulence factors by VBNC cells is not sufficient to maintain their virulence.

Single-cell analysis of cell viability after a biocide treatment unveils an absence of positive correlation between two commonly used viability markers

Discrimination among viable/active or dead/inactive cells in a microbial community is a vital question to address issues on ecological microbiology or microbiological quality control. It is commonly assumed that metabolically active cells (ChemchromeV6 [CV6] procedure) correspond to viable cells (direct viable count procedure [DVC]), although this assumption has never been demonstrated and is therefore a matter of debate. Indeed, simultaneous determination of cell viability and metabolic activity has never been performed on the same cells. Here, we developed a microfluidic device to investigate the viability and the metabolic activity of Escherichia coli cells at single-cell level. Cells were immobilized in a flow chamber in which different solutions were sequentially injected according to different scenarios. By using time-lapse microscopy combined with automated tracking procedures, we first successfully assessed the ability of cells to divide and their metabolic activity at single-cell level. Applying these two procedures on the same cells after a hypochlorous acid (HOCl) treatment, we showed that the ability of cells to divide and their metabolic activity were anticorrelated. These results indicate that the relation between CV6 uptake and cell viability may be partially incorrect. Care must be taken in using the terms "CV6-positive" and "viable" synonymously.

Total and viable Legionella pneumophila cells in hot and natural waters as measured by immunofluorescence-based assays and solid-phase cytometry

A new method was developed for the rapid and sensitive detection of viable Legionella pneumophila. The method combines specific immunofluorescence (IF) staining using monoclonal antibodies with a bacterial viability marker (ChemChrome V6 cellular esterase activity marker) by means of solid-phase cytometry (SPC). IF methods were applied to the detection and enumeration of both the total and viable L. pneumophila cells in water samples. The sensitivity of the IF methods coupled to SPC was 34 cells liter(-1), and the reproducibility was good, with the coefficient of variation generally falling below 30%. IF methods were applied to the enumeration of total and viable L. pneumophila cells in 46 domestic hot water samples as well as in cooling tower water and natural water samples, such as thermal spring water and freshwater samples. Comparison with standard plate counts showed that (i) the total direct counts were always higher than the plate counts and (ii) the viable counts were higher than or close to the plate counts. With domestic hot waters, when the IF assay was combined with the viability test, SPC detected up to 3.4 × 10(3) viable but nonculturable L. pneumophila cells per liter. These direct IF methods could be a powerful tool for high-frequency monitoring of domestic hot waters or for investigating the occurrence of viable L. pneumophila in both man-made water systems and environmental water samples.

Specific and rapid enumeration of viable but nonculturable and viable-culturable gram-negative bacteria by using flow cytometry

An issue of critical concern in microbiology is the ability to detect viable but nonculturable (VBNC) and viable-culturable (VC) cells by methods other than existing approaches. Culture methods are selective and underestimate the real population, and other options (direct viable count and the double-staining method using epifluorescence microscopy and inhibitory substance-influenced molecular methods) are also biased and time-consuming. A rapid approach that reduces selectivity, decreases bias from sample storage and incubation, and reduces assay time is needed. Flow cytometry is a sensitive analytical technique that can rapidly monitor physiological states of bacteria. This report outlines a method to optimize staining protocols and the flow cytometer (FCM) instrument settings for the enumeration of VBNC and VC bacterial cells within 70 min. Experiments were performed using the FCM to quantify VBNC and VC Escherichia coli O157:H7, Pseudomonas aeruginosa, Pseudomonas syringae, and Salmonella enterica serovar Typhimurium cells after staining with different fluorescent probes: SYTO 9, SYTO 13, SYTO 17, SYTO 40, and propidium iodide (PI). The FCM data were compared with those for specific standard nutrient agar to enumerate the number of cells in different states. By comparing results from cultures at late log phase, 1 to 64% of cells were nonculturable, 40 to 98% were culturable, and 0.7 to 4.5% had damaged cell membranes and were therefore theoretically dead. Data obtained using four different gram-negative bacteria exposed to heat and stained with PI also illustrate the usefulness of the approach for the rapid and unbiased detection of dead versus live organisms.

Estimation of microbial viability using flow cytometry

For microorganisms in particular, viability is a term that is difficult to define and a state consequently difficult to measure. The traditional (and gold-standard) usage equates viability and culturability (i.e., the ability to multiply), but the process of determining culturability is often too slow. Flow cytometry provides the opportunity to make rapid and quantitative measurements of dye uptake in large numbers of cells, and we can therefore exploit the flow cytometric approach to evaluate so-called viability stains and to develop protocols for more routine assessments of microbial viability. This unit is primarily commentary, but several basic protocols have been included to ensure that users have a firm basis for attempting these reasonably difficult assays on traditional flow cytometer instruments. What is clear is that each assay must be carefully validated with the particular microorganism of interest before being applied in any research, clinical, or service form.

A PCR-based method for monitoring Legionella pneumophila in water samples detects viable but noncultivable legionellae that can recover their cultivability

Legionella pneumophila is the causative agent of Legionnaires' disease. This bacterium is ubiquitous in aqueous environments and uses amoebae as an intracellular replicative niche. Real-time PCR has been developed for rapid detection of Legionella DNA in water samples. In addition to culturable bacteria, this method may also detect dead and viable but noncultivable (VBNC) legionellae. In order to understand the significance of positive PCR results in this setting, we prepared water samples containing known concentrations of L. pneumophila and analyzed them comparatively by means of conventional culture, real-time PCR, viability labeling, and immunodetection (solid-phase cytometry). We also examined the influence of chlorination on the results of the four methods. The different techniques yielded similar results for nonchlorinated water samples but not for chlorinated samples. After treatment for 24 h with 0.5 and 1 ppm chlorine, all cultures were negative, PCR and immunodetection showed about 10(6) genome units and bacteria/ml, and total-viable-count (TVC) labeling detected 10(5) and 10(2) metabolically active bacteria/ml, respectively. Thus, PCR also detected bacteria that were VBNC. The recoverability of VBNC forms was confirmed by 5 days of coculture with Acanthamoeba polyphaga. Therefore, some TVC-positive bacteria were potentially infective. These data show that L. pneumophila PCR detects not only culturable bacteria but also VBNC forms and dead bacterial DNA at low chlorine concentrations.

High throughput, real-time detection of Naegleria lovaniensis in natural river water using LED-illuminated Fountain FlowTMCytometry

AIMS

To test Fountain Flow Cytometry (FFC) for the rapid and sensitive detection of Naegleria lovaniensis amoebae (an analogue for Naegleria fowleri) in natural river waters.

METHODS AND RESULTS

Samples were incubated with one of two fluorescent labels to facilitate detection: ChemChrome V6, a viability indicator, and an R-phycoerytherin (RPE) immunolabel to detect N. lovaniensis specifically. The resulting aqueous sample was passed as a stream in front of a light-emitting diode, which excited the fluorescent labels. The fluorescence was detected with a digital camera as the sample flowed toward the imager. Detections of N. lovaniensis were made in inoculated samples of natural water from eight rivers in France and the United States. FFC enumeration yielded results that are consistent with other counting methods: solid-phase cytometry, flow cytometry, and hemocytometry, down to concentrations of 0.06 amoebae ml(-1), using a flow rate of 15 ml min(-1).

CONCLUSIONS

This study supports the efficacy of using FFC for the detection of viable protozoa in natural waters and indicates that use of RPE illuminated at 530 nm and detected at 585 nm provides a satisfactory means of attenuating background.

SIGNIFICANCE AND IMPACT OF THE STUDY

Because of the severe global public health issues with drinking water and sanitation, there is an urgent need to develop a technique for the real-time detection of viable pathogens in environmental samples at low concentrations. FFC addresses this need.

Fountain Flow cytometry, a new technique for the rapid detection and enumeration of microorganisms in aqueous samples

BACKGROUND

Pathogenic microorganisms are known to cause widespread waterborne disease worldwide. There is an urgent need to develop a technique for the real-time detection of pathogens in environmental samples at low concentrations, <10 microorganisms/ml, in large sample volumes, > or =100 ml.

METHODS

A novel method, Fountain Flowtrade mark cytometry, for the rapid and sensitive detection of individual microorganisms in aqueous samples is presented. Each sample is first incubated with a fluorescent label and then passed as a stream in front of a laser, which excites the label. The fluorescence is detected with a CCD imager as the sample flows toward the imager along its optical axis. The feasibility of Fountain Flow cytometry (FFC) is demonstrated by the detection of Escherichia coli labeled with ChemChrome CV6 and SYBR Gold in buffer and natural river water.

RESULTS

Detections of labeled E. coli were made in aqueous suspensions with an efficiency of 96% +/- 14% down to a concentration approximately 200 bacteria/ml.

CONCLUSIONS

The feasibility of FFC is demonstrated by the detection of E. coli in buffer and natural river water. FFC should apply to the detection of a wide range of pathogenic microorganisms including amoebae.

An improved method for the selective detection of fungi in hospital waters by solid phase cytometry

Yeast cells and mould spores can be fluorescently labelled with the viability stain carboxyfluorescein diacetate (CFDA) and detected on a membrane filter by laser scanning (solid phase cytometry, SPC). Although the selectivity of an existing commercial SPC procedure for fungi is ensured by using a 2 microm pore size membrane filter and a pre-incubation on a proprietary spore swelling/activation medium, some bacteria are still co-detected. In the present study, the selectivity for fungi has been enhanced by combining the green fluorescent CFDA with a second red fluorescent label, i.e. TRITC-concanavalin A, targetting fungal but not commonly bacterial cells. Additional improvements resulted from the prolongation of the pre-incubation and from the extra-rinsing of the membrane filter. The improved method was applied to detect fungi in hospital waters, dialysis fluids and endoscopic rinse waters. In general, SPC detected more fungi in water than plate methods. The occurrence of fungi in dialysis fluid and endoscopic rinse water was rare. Evidence for the presence of fungal viable but non-culturable (VBNC) cells in water was weak.

Use of flow cytometry to follow the physiological states of microorganisms in cider fermentation processes

The flow cytometry (FC) technique used with certain fluorescent dyes (ChemChrome V6 [CV6], DRAQ5, and PI) has proven useful to label and to detect different physiological states of yeast and malolactic bacterium starters conducting cider fermentation over time (by performing sequential inoculation of microorganisms). First, the technique was tested with pure cultures of both types of microorganisms grown in synthetic media under different induced stress conditions. Metabolically active cells detected by FC and by the standard plate-counting method for both types of microorganisms in fresh overnight pure cultures gave good correlations between the two techniques in samples taken at this stage. Otherwise, combining the results obtained by FC and plating during alcoholic and malolactic fermentation over time in the cider-making process, different subpopulations were detected, showing significant differences between the methods. A small number of studies have applied the FC technique to analyze fermentation processes and mixed cultures over time. The results were used to postulate equations explaining the different physiological states in cell populations taken from fresh, pure overnight cultures under nonstress conditions or cells subjected to stress conditions over time, either under a pure-culture fermentation process (in this work, corresponding to alcoholic fermentation) or under mixed-fermentation conditions (for the malolactic-fermentation phase), that could be useful to improve the control of the processes.

FISH and chips: Marine bacterial communities analyzed by flow cytometry based on microfluidics

To unveil the structure of natural marine pelagic bacterial communities, PCR-based techniques as well as fluorescence in situ hybridizations (FISH) were successfully performed in the past. Using fluorescence microscopes or confocal laser scanning microscopes (CLSM) for the analysis of FISH experiments, it was possible to differentiate bacterial communities, but most attempts to combine flow cytometry and FISH for this purpose have failed till now. Here we present a successful analysis of FISH experiments of natural marine pelagic bacterial communities using a flow cytometer based on microfluidics (Agilent 2100 bioanalyzer). Marine water samples were enriched on polycarbonate filters and hybridized with Cy5 labeled gene probes of different phylogenetic depth. Bacteria were detached from the filters and subsequently analyzed in the Cell Chip of the Agilent 2100 Bioanalyzer. Samples were counter-stained using SYTOX. In all samples the EUB338 positive signals could be clearly differentiated from those of the NON probe. Furthermore a dominance of alpha-protebacteria (as indicated by the probes ALF968 and G rB) could be observed. Microfluidics based flow cytometry is a promising technique for the analysis of natural bacterial communities from the marine environment.

Comparison of fluorescence microscopy and solid-phase cytometry methods for counting bacteria in water

Total direct counts of bacterial abundance are central in assessing the biomass and bacteriological quality of water in ecological and industrial applications. Several factors have been identified that contribute to the variability in bacterial abundance counts when using fluorescent microscopy, the most significant of which is retaining an adequate number of cells per filter to ensure an acceptable level of statistical confidence in the resulting data. Previous studies that have assessed the components of total-direct-count methods that contribute to this variance have attempted to maintain a bacterial cell abundance value per filter of approximately 10(6) cells filter(-1). In this study we have established the lower limit for the number of bacterial cells per filter at which the statistical reliability of the abundance estimate is no longer acceptable. Our results indicate that when the numbers of bacterial cells per filter were progressively reduced below 10(5), the microscopic methods increasingly overestimated the true bacterial abundance (range, 15.0 to 99.3%). The solid-phase cytometer only slightly overestimated the true bacterial abundances and was more consistent over the same range of bacterial abundances per filter (range, 8.9 to 12.5%). The solid-phase cytometer method for conducting total direct counts of bacteria was less biased and performed significantly better than any of the microscope methods. It was also found that microscopic count data from counting 5 fields on three separate filters were statistically equivalent to data from counting 20 fields on a single filter.

Rapid and automated detection of fluorescent total bacteria in water samples

Traditional methods for the detection and enumeration of bacteria in water samples are growth-based and require several days to obtain the result. New techniques which reduce the time of analysis have been developed. The objective of this work was to test a rapid method for the detection and enumeration of total viable bacteria using direct fluorescent labelling and detection by laser scanning. This method (referred to as TVC for Total Viable Count) was compared to the R2A culture method and the cyano-ditolyl-tetrazolium chloride (CTC) staining method for the analysis of samples before the final chlorination (after GAC filtration) and drinking water samples. For the comparison of TVC and CTC, the outcome depends on the water type: for samples after GAC filtration, TVC counts were significantly lower than CTC counts by up to 2 log10 orders of magnitude. For chlorinated water samples, TVC counts were not significantly different from CTC counts. The comparison of TVC and R2A showed that TVC counts could be lower than R2A counts or equivalent depending on the type of water. For drinking water, the TVC method proved to yield results equivalent to those of the R2A method. The TVC method requires much shorter time frame than others. It is also simple to use and allows the analysis of large volumes (100 ml) of drinking water.

Rains, drains and active strains: towards online assessment of wastewater bacterial communities

Wastewater treatment is one of the largest scale and arguably the most commercially important biotechnological process in the world. Bacterial breakdown of waste materials facilitates the safe disposal of effluents into receiving water bodies. Given this significance, research has focused on identifying the keystone species on which efficient treatment is based. However, unravelling the microbial diversity within such systems has proven difficult. This is highlighted by our lack of detailed knowledge of the microbial interactions within these complex populations, limiting our ability to fully exploit bacterial degradative abilities. Even with the incorporation of new emerging molecular techniques, there have been no investigations linking genetic sequence to microbial function and successful treatment operation. To reach this goal, researchers need the ability to identify, enumerate and monitor the metabolic functions of subpopulations within these complex bacterial communities. Flow cytometry (FCM) combined with fluorescence-based molecular identification techniques provides a method for such studies. Moreover, single-cell sorting provides a unique opportunity to identify and remove individual cells of interest. Laboratory culture of sorted cells is often possible and permits the use of more traditional microbiological techniques to backup molecular investigations. Utilising this approach will advance our understanding of wastewater treatment processes and help maintain and enhance plant operation to improve efficiency.

A sensitive and rapid method to determine the viability of freeze-dried bacterial cells

AIMS

To determine the potential use of flow cytometry for viability asssessment of freeze-dried bacterial cells.

METHODS AND RESULTS

Escherichia coli CIP 54.8T and Vibrio metschnikovii CIP 104262 were analysed. The viability of freeze-dried cells resuspended in a nutrient broth was evaluated by culture whereas activity was determined by flow cytometry analysis of both esterase activity and cell death. Activity assessment by flow cytometry was found to be a rapid and good indicator of cell viability and was very efficient for quality control. For V. metschnikovii the fraction of active cells varies greatly depending on the freeze-drying procedure and within a given procedure.

CONCLUSIONS, SIGNIFICANCE AND IMPACT OF THE STUDY

Bacterial activity assessment by flow cytometry is very efficient for the control of freeze-dried cells.

Rapid and sensitive enumeration of viable diluted cells of members of the family enterobacteriaceae in freshwater and drinking water

Water quality assessment involves the specific, sensitive, and rapid detection of bacterial indicators and pathogens in water samples, including viable but nonculturable (VBNC) cells. This work evaluates the specificity and sensitivity of a new method which combines a fluorescent in situ hybridization (FISH) approach with a physiological assay (direct viable count [DVC]) for the direct enumeration, at the single-cell level, of highly diluted viable cells of members of the family Enterobacteriaceae in freshwater and drinking water after membrane filtration. The approach (DVC-FISH) uses a new direct detection device, the laser scanning cytometer (Scan RDI). Combining the DVC-FISH method on a membrane with Scan RDI detection makes it possible to detect as few as one targeted cell in approximately 10(8) nontargeted cells spread over the membrane. The ability of this new approach to detect and enumerate VBNC enterobacterial cells in freshwater and drinking water distribution systems was investigated and is discussed.

Simultaneous fluorescent gram staining and activity assessment of activated sludge bacteria

Wastewater treatment is one of the most important commercial biotechnological processes, and yet the component bacterial populations and their associated metabolic activities are poorly understood. The novel fluorescent dye hexidium iodide allows assessment of Gram status by differential absorption through bacterial cell walls. Differentiation between gram-positive and gram-negative wastewater bacteria was achieved after flow cytometric analysis. This study shows that the relative proportions of gram-positive and gram-negative bacterial cells identified by traditional microscopy and hexidium iodide staining were not significantly different. Dual staining of cells for Gram status and activity proved effective in analyzing mixtures of cultured bacteria and wastewater populations. Levels of highly active organisms at two wastewater treatment plants, both gram positive and gram negative, ranged from 1.5% in activated sludge flocs to 16% in the activated sludge fluid. Gram-positive organisms comprised <5% of the total bacterial numbers but accounted for 19 and 55% of the highly active organisms within flocs at the two plants. Assessment of Gram status and activity within activated sludge samples over a 4-day period showed significant differences over time. This method provides a rapid, quantitative measure of Gram status linked with in situ activity within wastewater systems.

Enumeration of viable anaerobic bacteria by solid phase cytometry under aerobic conditions

Classical enumeration methods for anaerobes are time-consuming and require special conditions. Solid phase cytometry (SPC) is a recent laser scanning technique for the quantitative detection of fluorescently labelled bacteria on a membrane filter that eliminates the need for a growth phase. Fluorescent labelling of cells results from the cleavage by intracellular esterases of a fluorescein type ester to yield a free fluorescein derivative, which is retained only in cells with an intact cytoplasmic membrane. However, as the standard labelling procedure is carried out under the conditions of aerobiosis, labelling of anaerobic bacteria does not appear to be obvious. We have labelled eight strains of vegetative anaerobic bacteria (i.e. Bacteroides thetaiotaomicron, Clostridium bifermentans, C. butyricum, C. perfringens, Fusobacterium nucleatum, Porphyromonas canoris, P. gingivalis, Propionibacterium acnes) and two strains of spores (C. butyricum, C. perfringens,) within 4 h under aerobic conditions. However, anaerobiosis remained necessary for spores of C. sordellii, C. sporogenes, C. tyrobutyricum. For vegetative cells of all strains, plots of SPC versus plate counts were linear with slopes exceeding 1.0, indicating that SPC consistently yielded higher numbers of bacteria.

Closely related Prochlorococcus genotypes show remarkably different depth distributions in two oceanic regions as revealed by in situ hybridization using 16S rRNA-targeted oligonucleotides

An in situ hybridization method was applied to the identification of marine cyanobacteria assignable to the genus Prochlorococcus using horseradish-peroxidase-labelled 16S rRNA-targeted oligonucleotide probes in combination with tyramide signal amplification (TSA). With this method very bright signals were obtained, in contrast to hybridizations with oligonucleotides monolabelled with fluorochromes, which failed to give positive signals. Genotype-specific oligonucleotides for high light (HL)- and low light (LL)-adapted members of this genus were identified by 16S rRNA sequence analyses and their specificities confirmed in whole-cell hybridizations with cultured strains of Prochlorococcus marinus Chisholm et al., 1992, Prochlorococcus sp. and Synechococcus sp. In situ hybridization of these genotype-specific probes to field samples from stratified water bodies collected in the North Atlantic Ocean and the Red Sea allowed a rapid assessment of the abundance and spatial distribution of HL- and LL-adapted Prochlorococcus. In both oceanic regions the LL-adapted Prochlorococcus populations were localized in deeper water whereas the HL-adapted Prochlorococcus populations were not only distinct in each region but also exhibited strikingly different depth distributions, HLI being confined to shallow water in the North Atlantic, in contrast to HLII, which was present throughout the water column in the Red Sea.

Are the actively respiring cells (CTC+) those responsible for bacterial production in aquatic environments?

The 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) staining method is commonly and increasingly used to detect and to enumerate actively respiring cells (CTC+ cells) in aquatic systems. However, this method remains controversial since some authors promote this technique while others pointed out several drawbacks of the method. Using flow cytometry (FCM), we showed that CTC staining kinetics vary greatly from one sample to another. Therefore, there is no universal staining protocol that can be applied to aquatic bacterial communities. Furthermore, using (3)H-leucine incorporation, it was shown that the CTC dye has a rapid toxic effect on bacterial cells by inhibiting protein synthesis, a key physiological function. The coupling of radioactive labelling with cell sorting by FCM suggested that CTC+ cells contribute to less than 60% of the whole bacterial activity determined at the community level. From these results, it is clearly demonstrated that the CTC method is not valid to detect active bacteria, i.e. cells responsible for bacterial production.

Use of fluorescent probes to assess physiological functions of bacteria at single-cell level

A wide diversity of fluorescent probes is currently available to assess the physiological state of microorganisms. The recent development of techniques such as solid-phase cytometry, the increasing sensitivity of fluorescence tools and multiparametric approaches combining taxonomic and physiological probes have improved the effectiveness of direct methods in environmental and industrial microbiology.